The latest amd64 snapshots installs and works fine
on a Dell PowerEdge R200 (dmesg below).
The current cvs of sys/ fails to boot though
- the machine goes back into the BIOS boot sequence
shortly after the /bsd start booting.
Jan
OpenBSD 5.7-current (GENERIC.MP) #1039: Wed Jun 3 12:09:31 MDT 2015
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4276822016 (4078MB)
avail mem = 4143362048 (3951MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xcff9c000 (46 entries)
bios0: vendor Dell Inc. version "1.4.3" date 05/15/2009
bios0: Dell Inc. PowerEdge R200
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ SSDT
SSDT SSDT
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3120 @ 3.16GHz, 2000.43 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 333MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3120 @ 3.16GHz, 2000.14 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 6MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX1)
acpiprt2 at acpi0: bus 2 (SBE0)
acpiprt3 at acpi0: bus 3 (SBE4)
acpiprt4 at acpi0: bus 4 (SBE5)
acpiprt5 at acpi0: bus 5 (COMP)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 2000 MHz: speeds: 3166, 2667, 2333, 2000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "Intel 3200/3210 PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
mpi0 at pci1 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: msi
mpi0: SAS6IR, firmware 0.25.47.0
scsibus1 at mpi0: 112 targets
sd0 at scsibus1 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed
naa.600508e0000000009ed329b65835f206
sd0: 69376MB, 512 bytes/sector, 142082048 sectors
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02
pci3 at ppb2 bus 3
bge0 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1 (0x4201):
msi, address 00:22:19:d6:32:bf
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02
pci4 at ppb3 bus 4
bge1 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1 (0x4201):
msi, address 00:22:19:d6:32:c0
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 21
uhci1 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 20
uhci2 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 21
ehci0 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci5 at ppb4 bus 5
radeondrm0 at pci5 dev 5 function 0 "ATI ES1000" rev 0x02
drm0 at radeondrm0
radeondrm0: apic 2 int 19
pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 23 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 1
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <TEAC, DVD-ROM DV28SV, D.0J> ATAPI 5/cdrom
removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub4 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (39682c121cba2ea4.a) swap on sd0b dump on sd0b
error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load
firmware "radeon-r100_cp"
error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
drm:pid0:r100_startup *ERROR* failed initializing CP (-2).
drm:pid0:r100_init *ERROR* Disabling GPU acceleration
radeondrm0: 1920x1080
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
