Hi Stuart,
On 19.03.2015 23:39, Stuart Henderson wrote:
Is the dmesg below from a boot with the monitor connected or not?
Can you show the equivalent of these lines from the other type? Look in
/var/log/messages* for old boot messages.
Good point! This dmesg is with the monitor attached. Please see below
for a dmesg without monitor:
Dec 30 16:48:31 dumper /bsd: drm: initializing kernel modesetting (RS880
0x1002:0x9712 0x103C:0x1609).
Dec 30 16:48:31 dumper /bsd: radeondrm0: VRAM: 32M 0x00000000C0000000 -
0x00000000C1FFFFFF (32M used)
Dec 30 16:48:31 dumper /bsd: radeondrm0: GTT: 512M 0x00000000A0000000 -
0x00000000BFFFFFFF
Dec 30 16:48:31 dumper /bsd: drm: PCIE GART of 512M enabled (table at
0x00000000C0040000).
Dec 30 16:48:31 dumper /bsd: No connectors reported connected with modes
Dec 30 16:48:31 dumper /bsd: Cannot find any crtc or sizes - going
1024x768
Dec 30 16:48:31 dumper /bsd: radeondrm0: 1024x768
Dec 30 16:48:31 dumper /bsd: wsdisplay0 at radeondrm0 mux 1: console
(std, vt100 emulation)
Dec 30 16:48:31 dumper /bsd: wsdisplay0: screen 1-5 added (std, vt100
emulation)
root on sd0a (260fbbdcd0c7be61.a) swap on sd0b dump on sd0b
drm: initializing kernel modesetting (RS880 0x1002:0x9712
0x103C:0x1609).
radeondrm0: VRAM: 32M 0x00000000C0000000 - 0x00000000C1FFFFFF (32M
used)
radeondrm0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
drm: PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeondrm0: 1680x1050
I'm wondering if drm picked a resolution during boot that doesn't work
with your monitor. If this is the cause, you could disable radeondrm
with config(8)..
1024x768 is not the native resolution but I assume my sceen would be
able to display it anyway. I can confirm this tonight.
Thanks
Lars
