On Wed, Feb 18, 2015 at 01:34:48PM +0100, Jan Stary wrote:
> I just updated my ASUS J1800I-C to the latest amd64 snapshot,
> and can no longer connect to it via ssh from my Thinkpad T400.
> The error message is
>
> Packet integrity error (600 bytes remaining) at
> /usr/src/usr.bin/ssh/ssh/../clientloop.c:2097
> Disconnecting: Packet integrity error.
>
> It is always 600 bytes.
> The full output of ssh -vv is below.
> Note that this happens after a successful authentication via key.
>
> I ssh'd like that without problems minutes before I upgraded the ASUS to the
> amd64 snapshot.
> I can connect now from the source Thinkpad to anywhere else without problems.
> I can connect now to the target ASUS from anywhere else without problems.
> I can connect now the other way round, from the ASUS to the Thinkpad.
>
> Needless to say, nothing has changed on my home network.
> Both machines are connected to the same switch,
> and are on the same network (192.168.111.0/24).
>
> Both dmesgs below; the target machine (ASUS) is the latest amd64 snapshot,
> the Thinkpad is a Tuesday Feb 10 amd64 snapshot. Is it crazy to think
> that this particular combination of client and server is somehow broken?
> I thought I would just report this before I upgrade the Thinkpad too.
>
> Jan
This is known, there has been a window where the ssh client was
broken. Upgrade your ssh client to -current or use -oUpdateHostkeys=no
as a workaround.
-Otto
>
>
> hans@lenovo:~$ ssh -vv media
> OpenSSH_6.7, LibreSSL 2.1
> debug1: Reading configuration data /etc/ssh/ssh_config
> debug2: ssh_connect: needpriv 0
> debug1: Connecting to media [192.168.111.8] port 22.
> debug1: Connection established.
> debug1: identity file /home/hans/.ssh/id_rsa type 1
> debug1: key_load_public: No such file or directory
> debug1: identity file /home/hans/.ssh/id_rsa-cert type -1
> debug1: key_load_public: No such file or directory
> debug1: identity file /home/hans/.ssh/id_dsa type -1
> debug1: key_load_public: No such file or directory
> debug1: identity file /home/hans/.ssh/id_dsa-cert type -1
> debug1: key_load_public: No such file or directory
> debug1: identity file /home/hans/.ssh/id_ecdsa type -1
> debug1: key_load_public: No such file or directory
> debug1: identity file /home/hans/.ssh/id_ecdsa-cert type -1
> debug1: key_load_public: No such file or directory
> debug1: identity file /home/hans/.ssh/id_ed25519 type -1
> debug1: key_load_public: No such file or directory
> debug1: identity file /home/hans/.ssh/id_ed25519-cert type -1
> debug1: Enabling compatibility mode for protocol 2.0
> debug1: Local version string SSH-2.0-OpenSSH_6.7
> debug1: Remote protocol version 2.0, remote software version OpenSSH_6.7
> debug1: match: OpenSSH_6.7 pat OpenSSH* compat 0x04000000
> debug2: fd 3 setting O_NONBLOCK
> debug1: SSH2_MSG_KEXINIT sent
> debug1: SSH2_MSG_KEXINIT received
> debug2: kex_parse_kexinit:
> [email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group14-sha1,diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
> debug2: kex_parse_kexinit:
> [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],[email protected],ssh-ed25519,ssh-rsa,ssh-dss
> debug2: kex_parse_kexinit:
> aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected],[email protected],arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
> debug2: kex_parse_kexinit:
> aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected],[email protected],arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
> debug2: kex_parse_kexinit:
> [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1,[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
> debug2: kex_parse_kexinit:
> [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1,[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
> debug2: kex_parse_kexinit: none,[email protected],zlib
> debug2: kex_parse_kexinit: none,[email protected],zlib
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit: first_kex_follows 0
> debug2: kex_parse_kexinit: reserved 0
> debug2: kex_parse_kexinit:
> [email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group14-sha1
> debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256,ssh-ed25519
> debug2: kex_parse_kexinit:
> aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected],[email protected]
> debug2: kex_parse_kexinit:
> aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected],[email protected]
> debug2: kex_parse_kexinit:
> [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
> debug2: kex_parse_kexinit:
> [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
> debug2: kex_parse_kexinit: none,[email protected]
> debug2: kex_parse_kexinit: none,[email protected]
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit: first_kex_follows 0
> debug2: kex_parse_kexinit: reserved 0
> debug1: kex: server->client aes128-ctr [email protected] none
> debug1: kex: client->server aes128-ctr [email protected] none
> debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
> debug1: Server host key: ecdsa-sha2-nistp256
> SHA256:L9RNC8POAvkLNUpHnO76EFggOrPn6kKllNhITbbgIQw
> debug1: Host 'media' is known and matches the ECDSA host key.
> debug1: Found key in /home/hans/.ssh/known_hosts:23
> debug2: set_newkeys: mode 1
> debug1: SSH2_MSG_NEWKEYS sent
> debug1: expecting SSH2_MSG_NEWKEYS
> debug2: set_newkeys: mode 0
> debug1: SSH2_MSG_NEWKEYS received
> debug1: Roaming not allowed by server
> debug1: SSH2_MSG_SERVICE_REQUEST sent
> debug2: service_accept: ssh-userauth
> debug1: SSH2_MSG_SERVICE_ACCEPT received
> debug2: key: /home/hans/.ssh/id_rsa (0x130aff1227c0),
> debug2: key: /home/hans/.ssh/id_dsa (0x0),
> debug2: key: /home/hans/.ssh/id_ecdsa (0x0),
> debug2: key: /home/hans/.ssh/id_ed25519 (0x0),
> debug1: Authentications that can continue:
> publickey,password,keyboard-interactive
> debug1: Next authentication method: publickey
> debug1: Offering RSA public key: /home/hans/.ssh/id_rsa
> debug2: we sent a publickey packet, wait for reply
> debug1: Server accepts key: pkalg ssh-rsa blen 279
> debug2: input_userauth_pk_ok: fp
> SHA256:LCIo1IQu4n6C+HxVOjh+A4wDiMq0ae0OfRgge/6P2tA
> debug1: Authentication succeeded (publickey).
> Authenticated to media ([192.168.111.8]:22).
> debug1: channel 0: new [client-session]
> debug2: channel 0: send open
> debug1: Requesting [email protected]
> debug1: Entering interactive session.
> debug1: client_input_global_request: rtype [email protected] want_reply 0
> Packet integrity error (600 bytes remaining) at
> /usr/src/usr.bin/ssh/ssh/../clientloop.c:2097
> Disconnecting: Packet integrity error.
> hans@lenovo:~$ ^D
>
>
> OpenBSD 5.7-beta (GENERIC.MP) #852: Tue Feb 10 16:31:16 MST 2015
> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 3095072768 (2951MB)
> avail mem = 3008819200 (2869MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (80 entries)
> bios0: vendor LENOVO version "7UET94WW (3.24 )" date 10/17/2012
> bios0: LENOVO 64741EG
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA
> SSDT SSDT SSDT
> acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4)
> EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3)
> EHC1(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 2261.30 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF
> cpu0: 3MB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
> cpu0: apic clock running at 265MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 2261.00 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF
> cpu1: 3MB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus -1 (EXP2)
> acpiprt5 at acpi0: bus 5 (EXP3)
> acpiprt6 at acpi0: bus 13 (EXP4)
> acpiprt7 at acpi0: bus 21 (PCI1)
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpipwrres0 at acpi0: PUBS, resource for USB0, USB3, USB5, EHC0, EHC1
> acpitz0 at acpi0: critical temperature is 127 degC
> acpitz1 at acpi0: critical temperature is 100 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "93P5030" serial 1559 type LION oem "SONY"
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> cpu0: Enhanced SpeedStep 2261 MHz: speeds: 2267, 2266, 1600, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0 at vga1
> drm0 at inteldrm0
> inteldrm0: 1280x800
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA
> (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide0: using apic 1 int 18 for native-PCI interrupt
> pciide0: channel 0 ignored (not responding; disabled or no drives?)
> pciide0: channel 1 ignored (not responding; disabled or no drives?)
> puc0 at pci0 dev 3 function 3 "Intel GM45 KT" rev 0x07: ports: 1 com
> com4 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
> com4: probed fifo depth: 0 bytes
> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address
> 00:1c:25:9b:0a:23
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
> azalia0: codecs: Conexant CX20561
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO
> 3T3R, MoW, address 00:21:6a:01:9f:ce
> ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
> pci3 at ppb2 bus 5
> ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
> pci4 at ppb3 bus 13
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci5 at ppb4 bus 21
> cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
> "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
> sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
> sdmmc0 at sdhc0
> "Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured
> "Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured
> "Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0
> pcmcia0 at cardslot0
> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1600BEVS-0, 13.0> SCSI3 0/direct
> fixed naa.50014ee2acde9a68
> sd0: 152627MB, 512 bytes/sector, 312581808 sectors
> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-U20N, HX11> ATAPI 5/cdrom
> removable
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
> iic0 at ichiic0
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics touchpad, firmware 7.0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> umodem0 at uhub1 port 4 configuration 1 interface 1 "Ericsson Ericsson F3507g
> Mobile Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
> umodem0: data interface 2, has CM over data, has break
> umodem0: status change notification available
> ucom0 at umodem0
> umodem1 at uhub1 port 4 configuration 1 interface 3 "Ericsson Ericsson F3507g
> Mobile Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
> umodem1: data interface 4, has CM over data, has break
> umodem1: status change notification available
> ucom1 at umodem1
> cdce0 at uhub1 port 4 configuration 1 interface 7 "Ericsson Ericsson F3507g
> Mobile Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
> cdce0: address 02:80:37:ec:02:00
> ugen0 at uhub1 port 4 configuration 1 "Ericsson Ericsson F3507g Mobile
> Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
> ugen1 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
> ugen2 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced
> Data Rate II" rev 2.00/3.99 addr 3
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
> sd1: 150365MB, 512 bytes/sector, 307948512 sectors
> root on sd1a (236eb28361c74a52.a) swap on sd1b dump on sd1b
>
>
> OpenBSD 5.7-beta (GENERIC.MP) #856: Tue Feb 17 12:43:12 MST 2015
> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 912130048 (869MB)
> avail mem = 883990528 (843MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebd60 (43 entries)
> bios0: vendor American Megatrends Inc. version "0604" date 06/10/2014
> bios0: ASUS All Series
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT MCFG LPIT HPET SSDT SSDT SSDT UEFI SSDT
> acpi0: wakeup devices UAR5(S4) UAR8(S4) PS2K(S4) PS2M(S4) UAR1(S4) URIR(S4)
> XHC1(S4) EHC1(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PWRB(S0)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Celeron(R) CPU J1800 @ 2.41GHz, 2417.21 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS
> cpu0: 1MB 64b/line 16-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 83MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Celeron(R) CPU J1800 @ 2.41GHz, 2416.67 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS
> cpu1: 1MB 64b/line 16-way L2 cache
> cpu1: smt 0, core 1, package 0
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins
> acpimadt0: bogus nmi for apid 0
> acpimadt0: bogus nmi for apid 2
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (RP01)
> acpiprt2 at acpi0: bus 2 (RP02)
> acpiprt3 at acpi0: bus 3 (RP03)
> acpiprt4 at acpi0: bus 4 (RP04)
> acpiec0 at acpi0: not present
> acpicpu0 at acpi0: C1, PSS
> acpicpu1 at acpi0: C1, PSS
> acpipwrres0 at acpi0: PLPE
> acpipwrres1 at acpi0: PLPE
> acpipwrres2 at acpi0: USBC, resource for EHC1, OTG1
> acpipwrres3 at acpi0: FN00, resource for FAN0
> acpitz0 at acpi0: critical temperature is 90 degC
> acpibat0 at acpi0: BAT0 not present
> acpibat1 at acpi0: BAT1 not present
> acpibat2 at acpi0: BAT2 not present
> acpibtn0 at acpi0: LID0
> acpibtn1 at acpi0: PWRB
> acpibtn2 at acpi0: SLPB
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> cpu0: Enhanced SpeedStep 2417 MHz: speeds: 2408, 2407, 2324, 2241, 2158,
> 2075, 1992, 1909, 1826, 1743, 1660, 1577, 1494, 1411, 1328 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0c
> vga1 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0c
> intagp at vga1 not configured
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x0c: msi, AHCI 1.3
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG HM251JJ, 2AA0> SCSI3 0/direct
> fixed naa.50f0000003105140
> sd0: 238475MB, 512 bytes/sector, 488397168 sectors
> sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD10TPVT-00H, 01.0> SCSI3 0/direct
> fixed naa.50014ee2aed8deca
> sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
> xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0c: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
> "Intel Bay Trail TXE" rev 0x0c at pci0 dev 26 function 0 not configured
> azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x0c: msi
> azalia0: codecs: Realtek/0x0887, Intel/0x2882, using Realtek/0x0887
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel Bay Trail PCIE" rev 0x0c: msi
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 1 "Intel Bay Trail PCIE" rev 0x0c: msi
> pci2 at ppb1 bus 2
> re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G
> (0x4c00), msi, address e0:3f:49:6f:f3:1c
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> ppb2 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x0c: msi
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x0c: msi
> pci4 at ppb3 bus 4
> pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x0c
> ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0c: apic 1
> int 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR3 SDRAM PC3-10600 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> uhub1 at uhub0 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 2
> uhidev0 at uhub1 port 2 configuration 1 interface 0 "Genius Optical Mouse"
> rev 1.10/1.00 addr 3
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> umidi0 at uhub1 port 3 configuration 1 interface 1 "M-Audio USB Uno MIDI
> Interface" rev 1.00/1.25 addr 4
> umidi0: (genuine USB-MIDI)
> umidi0: out=1, in=1
> midi0 at umidi0: <USB MIDI I/F>
> ugen0 at uhub1 port 3 configuration 1 "M-Audio USB Uno MIDI Interface" rev
> 1.00/1.25 addr 4
> uplcom0 at uhub1 port 4 "Prolific Technology Inc. USB-Serial Controller" rev
> 1.10/3.00 addr 5
> ucom0 at uplcom0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (b6c0cad145f7170f.a) swap on sd0b dump on sd0b
