I set comaddr:
machine comaddr 0x0000df00/0x0020
set tty com4
but I only got some kind of trash on my console output
(ŃuBÓZ6ÁÂ$őďNŚO%âăÔkşľŚÚĄyyyyy).
I replaced my PCIcard with other one:
# pcidump -v
4:0:0: NetMos Nm9835
0x0000: Vendor ID: 9710 Product ID: 9835
0x0004: Command: 0001 Status: 0280
0x0008: Class: 07 Subclass: 80 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 20 Cache Line Size: 10
0x0010: BAR io addr: 0x0000df00/0x0008
0x0014: BAR io addr: 0x0000de00/0x0008
0x0018: BAR io addr: 0x0000dd00/0x0008
0x001c: BAR io addr: 0x0000dc00/0x0008
0x0020: BAR io addr: 0x0000db00/0x0008
0x0024: BAR io addr: 0x0000da00/0x0010
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1000 Product ID: 0012
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0c Min Gnt: 00 Max Lat: 00
# cat /etc/boot.conf
machine comaddr 0x0000df00/0x0008
set tty com4
# dmesg
pci4 at ppb3 bus 4
puc0 at pci4 dev 0 function 0 "NetMos Nm9835" rev 0x01: ports: 2 com, 1 lpt
com4 at puc0 port 0 apic 2 int 16: ns16550a, 16 byte fifo
com4: console
com5 at puc0 port 1 apic 2 int 16: ns16550a, 16 byte fifo
lpt3 at puc0 port 2 apic 2 int 16
My serial console works well now. Thanks!
On Mon, 16 Feb 2015 10:23:25 -0800
Mike Larkin <[email protected]> wrote:
> man boot
>
> search for 'comaddr'. You probably need to set that up.
>
> Also, the bootloader may not understand the 16750.
>
> -ml
>
>
> On Mon, Feb 16, 2015 at 10:50:35AM +0100, Radek wrote:
> > I'm trying to setup a serial console. My RS-232 is an old PCIcard.
> >
> > I tried this way:
> > boot> set tty com4
> >
> > /etc/ttys:
> > tty00 "/usr/libexec/getty std.9600" vt220 on secure
> > tty04 "/usr/libexec/getty std.9600" vt220 on secure
> >
> > but can't connect to console and the system doesn't boot.
> > What am I doing wrong?
> >
> >
> > # dmesg
> > OpenBSD 5.6 (GENERIC.MP) #1: Wed Feb 11 11:23:16 CET 2015
> > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > cpu0: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz ("GenuineIntel" 686-class)
> > 3.38 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,LAHF,PERF,ITSC
> > real mem = 3487911936 (3326MB)
> > avail mem = 3418468352 (3260MB)
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 08/24/10, BIOS32 rev. 0 @ 0xfa810,
> > SMBIOS rev. 2.4 @ 0xf0100 (39 entries)
> > bios0: vendor Award Software International, Inc. version "F2" date
> > 08/24/2010
> > bios0: Gigabyte Technology Co., Ltd. X58-USB3
> > acpi0 at bios0: rev 0
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP MCFG EUDS MATS TAMG APIC SSDT
> > acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5)
> > HUB0(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USBE(S3)
> > USE2(S3) AZAL(S5) [...]
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 134MHz
> > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE
> > cpu1 at mainbus0: apid 2 (application processor)
> > cpu1: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz ("GenuineIntel" 686-class)
> > 3.24 GHz
> > cpu1:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,LAHF,PERF,ITSC
> > cpu2 at mainbus0: apid 4 (application processor)
> > cpu2: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz ("GenuineIntel" 686-class)
> > 3.24 GHz
> > cpu2:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,LAHF,PERF,ITSC
> > cpu3 at mainbus0: apid 6 (application processor)
> > cpu3: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz ("GenuineIntel" 686-class)
> > 3.24 GHz
> > cpu3:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,LAHF,PERF,ITSC
> > cpu4 at mainbus0: apid 1 (application processor)
> > cpu4: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz ("GenuineIntel" 686-class)
> > 3.24 GHz
> > cpu4:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,LAHF,PERF,ITSC
> > cpu5 at mainbus0: apid 3 (application processor)
> > cpu5: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz ("GenuineIntel" 686-class)
> > 3.24 GHz
> > cpu5:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,LAHF,PERF,ITSC
> > cpu6 at mainbus0: apid 5 (application processor)
> > cpu6: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz ("GenuineIntel" 686-class)
> > 3.24 GHz
> > cpu6:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,LAHF,PERF,ITSC
> > cpu7 at mainbus0: apid 7 (application processor)
> > cpu7: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz ("GenuineIntel" 686-class)
> > 3.24 GHz
> > cpu7:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,LAHF,PERF,ITSC
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > ioapic0: misconfigured as apic 0, remapped to apid 2
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus -1 (PEX0)
> > acpiprt2 at acpi0: bus -1 (PEX1)
> > acpiprt3 at acpi0: bus -1 (PEX2)
> > acpiprt4 at acpi0: bus -1 (PEX3)
> > acpiprt5 at acpi0: bus -1 (PEX4)
> > acpiprt6 at acpi0: bus -1 (PEX5)
> > acpiprt7 at acpi0: bus 4 (HUB0)
> > acpicpu0 at acpi0: PSS
> > acpicpu1 at acpi0: PSS
> > acpicpu2 at acpi0: PSS
> > acpicpu3 at acpi0: PSS
> > acpicpu4 at acpi0: PSS
> > acpicpu5 at acpi0: PSS
> > acpicpu6 at acpi0: PSS
> > acpicpu7 at acpi0: PSS
> > acpibtn0 at acpi0: PWRB
> > bios0: ROM list: 0xc0000/0xe400! 0xd0000/0x2a00!
> > cpu0: Enhanced SpeedStep 3239 MHz: speeds: 3193, 3192, 3059, 2926, 2793,
> > 2660, 2527, 2394, 2261, 2128, 1995, 1862, 1729, 1596 MHz
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel X58 Host" rev 0x13
> > ppb0 at pci0 dev 2 function 0 "Intel X58 PCIE" rev 0x13: apic 2 int 16
> > pci1 at ppb0 bus 1
> > "NEC xHCI" rev 0x03 at pci1 dev 0 function 0 not configured
> > ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13: apic 2 int 16
> > pci2 at ppb1 bus 2
> > vga1 at pci2 dev 0 function 0 "NVIDIA GeForce 210" rev 0xa2
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > azalia0 at pci2 dev 0 function 1 vendor "NVIDIA", unknown product 0x0be3
> > rev 0xa1: msi
> > azalia0: no supported codecs
> > ppb2 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: apic 2 int 16
> > pci3 at ppb2 bus 3
> > bnx0 at pci3 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 2 int 16
> > bnx1 at pci3 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 2 int 17
> > "Intel X58 QuickPath" rev 0x13 at pci0 dev 16 function 0 not configured
> > "Intel X58 QuickPath" rev 0x13 at pci0 dev 16 function 1 not configured
> > "Intel X58 QuickPath" rev 0x13 at pci0 dev 17 function 0 not configured
> > "Intel X58 QuickPath" rev 0x13 at pci0 dev 17 function 1 not configured
> > "Intel X58 IOxAPIC" rev 0x13 at pci0 dev 19 function 0 not configured
> > "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
> > "Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
> > "Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
> > vendor "Intel", unknown product 0x342f (class system subclass interrupt,
> > rev 0x13) at pci0 dev 21 function 0 not configured
> > uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 2 int 16
> > uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 2 int 21
> > uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 2 int 18
> > ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 2 int 18
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 2 int 23
> > uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 2 int 19
> > uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 2 int 18
> > ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 2 int 23
> > usb1 at ehci1: USB revision 2.0
> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
> > pci4 at ppb3 bus 4
> > puc0 at pci4 dev 0 function 0 "Sunix 40XX" rev 0x01: ports: 1 com
> > com4 at puc0 port 0 apic 2 int 16: ti16750, 64 byte fifo
> > com4: probed fifo depth: 32 bytes
> > pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
> > ahci0 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: msi, AHCI 1.2
> > scsibus1 at ahci0: 32 targets
> > sd0 at scsibus1 targ 0 lun 0: <ATA, HDS728080PLA380, PF2O> SCSI3 0/direct
> > fixed naa.5000cca304e1ec21
> > sd0: 78533MB, 512 bytes/sector, 160836480 sectors
> > sd1 at scsibus1 targ 1 lun 0: <ATA, Hitachi HUA72202, JKAO> SCSI3 0/direct
> > fixed naa.5000cca222e34ef3
> > sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors
> > sd2 at scsibus1 targ 2 lun 0: <ATA, ST4000DM000-1F21, CC54> SCSI3 0/direct
> > fixed naa.5000c50075b15e8f
> > sd2: 3815447MB, 512 bytes/sector, 7814037168 sectors
> > sd3 at scsibus1 targ 4 lun 0: <ATA, SAMSUNG HD154UI, 1AG0> SCSI3 0/direct
> > fixed naa.50024e90036690b4
> > sd3: 1430799MB, 512 bytes/sector, 2930277168 sectors
> > sd4 at scsibus1 targ 5 lun 0: <ATA, SAMSUNG HD154UI, 1AG0> SCSI3 0/direct
> > fixed naa.50024e900366909b
> > sd4: 1430798MB, 512 bytes/sector, 2930275055 sectors
> > ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 2
> > int 18
> > iic0 at ichiic0
> > iic0: addr 0x4e 00=80 03=34 04=34 06=0d 07=01 0c=5d 0d=5d 0e=5d 0f=90 12=ff
> > 13=ff 1a=40 1b=77 1d=02 20=0f 26=03 28=83 29=12 2a=34 35=7d 3b=28 40=ff
> > 41=01 42=2d 43=07 44=e5 45=3f 48=24 49=53 4a=34 words 00=8000 01=0000
> > 02=0034 03=3434 04=3400 05=000d 06=0d01 07=0100
> > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
> > spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
> > usb2 at uhci0: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci1: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x290
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > vscsi0 at root
> > scsibus2 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus3 at softraid0: 256 targets
> > root on sd0a (89317412504155d9.a) swap on sd0b dump on sd0b
> > bnx0: address 00:0a:f7:3a:63:fc
> > brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> > bnx1: address 00:0a:f7:3a:63:fe
> > brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> >
> > # pcidump -v
> > [...]
> > 4:0:0: Sunix 40XX
> > 0x0000: Vendor ID: 1409 Product ID: 7168
> > 0x0004: Command: 0081 Status: 0280
> > 0x0008: Class: 07 Subclass: 00 Interface: 02 Revision: 01
> > 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size:
> > 00
> > 0x0010: BAR io addr: 0x0000df00/0x0020
> > 0x0014: BAR empty (00000000)
> > 0x0018: BAR empty (00000000)
> > 0x001c: BAR empty (00000000)
> > 0x0020: BAR empty (00000000)
> > 0x0024: BAR empty (00000000)
> > 0x0028: Cardbus CIS: 00000000
> > 0x002c: Subsystem Vendor ID: 1409 Product ID: 4025
> > 0x0030: Expansion ROM Base Address: 00000000
> > 0x0038: 00000000
> > 0x003c: Interrupt Pin: 01 Line: 0c Min Gnt: 00 Max Lat: 00
> >
> >
> >
> > --
> > radek
> >
--
radek
