I applied the newest unbound patch to several amd64 machines without
trouble, and have had issues on several of my i386 boxes. The initial
error was probably the same as below, but led me to believe I may have
had some kind of kernel or system "frankenbox" behavior. I used cvs to
pull all the latest sources ("cvs -q up -rOPENBSD_5_6 -Pd" is what I
ran, so it should be the latest patch branch code),
compiled/installed/rebooted to the new kernel, then ran through the
steps for a make build. make build bombed out on nsd with a similar
error.
in unbound, running make -f Makefile.bsd-wrapper obj works fine, but
make -f Makefile.bsd-wrapper produces the error (which I believe is what
I initially saw):
...
checking for ctime_r... yes
checking if make supports $< with implicit rule in scope... yes
configure: Stripping extension flags...
configure: creating ./config.status
Bad system call (core dumped)
config.status: creating Makefile
Bad system call (core dumped)
config.status: error: could not create Makefile
*** Error 1 in /usr/src/usr.sbin/unbound (Makefile.bsd-wrapper:65
'/usr/src/usr.sbin/unbound/obj/config.status')
Similarly, when troubleshooting nsd I get:
...
checking if libssl needs libdl... no
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for openssl/rand.h... yes
configure: creating ./config.status
Bad system call (core dumped)
config.status: creating Makefile
Bad system call (core dumped)
config.status: error: could not create Makefile
*** Error 1 in /usr/src/usr.sbin/nsd (Makefile.bsd-wrapper:54
'config.status')
I have received these errors on both GENERIC and GENERIC.MP i386
machines so far.
Here's a dmesg from an MP machine:
OpenBSD 5.6-stable (GENERIC.MP) #0: Thu Dec 11 19:34:10 UTC 2014
root@XXXX:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Celeron(R) CPU E1200 @ 1.60GHz ("GenuineIntel" 686-class) 1.61
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
real mem = 524226560 (499MB)
avail mem = 503181312 (479MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/18/08, SMBIOS rev. 2.4 @ 0xe8170 (40
entries)
bios0: vendor Intel Corp. version "GLG3110H.86A.0004.2008.0318.2223" date
03/18/2008
bios0: Intel Corporation DG31GL
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC HPET MCFG
acpi0: wakeup devices P0P1(S3) PS2K(S3) PS2M(S3) UAR1(S3) P0P2(S4) USB0(S3)
USB1(S3) USB2(S3) USB3(S3) EUSB(S3) MC97(S4) SLPB(S4) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Celeron(R) CPU E1200 @ 1.60GHz ("GenuineIntel" 686-class) 1.60
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-64
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P0P2)
acpicpu0 at acpi0:, C3, C2, C1, PSS
acpicpu1 at acpi0:, C3, C2, C1, PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xb400! 0xcb800/0x1800
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1600, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x10: apic 0 int 16
pci1 at ppb0 bus 1
vga1 at pci0 dev 2 function 0 "Intel 82G33 Video" rev 0x10
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
No connectors reported connected with modes
Cannot find any crtc or sizes - going 1024x768
inteldrm0: 1024x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 0 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 0 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 0 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 0 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 0 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci2 at ppb1 bus 2
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VM" rev 0x01, i82562: apic 0 int
20, address 00:1c:c0:59:d7:29
inphy0 at fxp0 phy 1: i82562G 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 0 int 17 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-00MSA1>
wd0: 16-sector PIO, LBA48, 76318MB, 156299375 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 0 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-6400CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a swap on wd0b dump on wd0b
Thanks in advance!
