On Mon, Aug 18, 2014 at 4:43 PM, Dave Anderson <[email protected]> wrote: > > I'm having a problem that I don't know how to resolve on an amd64 system > (full dmesg below) which I just upgraded from 5.4-release to > 5.5-release. I've not yet done anything with the system other than > upgrading (from CD), saving and restoring packages and deleting > no-longer needed files (as specified in the upgrade guide), and loading > the source tree from CD. I don't think it's a hardware problem, since > the system has been fine up until now. Any suggestions as to how to > proceed would be greatly appreciated. > > I was loading the ports tree from the source CD using > # cd /usr && tar xzf /mnt/ports.tar.gz
your tar does not have p nor v, the first keep the right access while the second is just informative > > when I got this error: > tar: Access/modification time set failed on: > ports/lang/processing/files/CVS: Input/output error > Always the same file ? this really looks like a disk error, is this your disk : <<Seagate Momentus ST9750423AS 750GB 5400 RPM > if not the disk it may be the controller of the disk ..."Intel 6 Series AHCI" but probability is low did you check the sum of the tar file ? (given gzip is there it is probably not that.) And if i am not mistaken fsck check the file system , not all the sectors of the disk, for this you would have to use something else. It may also be a bad entry in your ram, using the tar may push file into rarely used part of memory, showing up a new problem. > > The only apparently-relevant info I've found in any log file is, in > /var/log/messages: > Aug 18 14:08:08 minya /bsd: ahci0: attempting to idle device > Aug 18 14:08:08 minya /bsd: ahci0: couldn't recover NCQ error, failing all > outstanding commands. > I'm not sure exactly what is happening when this error occurs, but it's > happened several more times as I've been poking around, including once > during the reboot/fsck sequence mentioned later. It definitely is not > caused by the ls/rm sequence below. > > Attempting to do anything with /usr/ports/lang/processing/files produces > weird results: > # cd /usr/ports/lang/processing > # ls -la files > [[~5 second delay]] > # rm -rf files > [[~4 second delay]] > rm: files: Directory not empty > > My disk is partitioned as > # df -hi > Filesystem Size Used Avail Capacity iused ifree %iused Mounted > on > /dev/sd0a 2.0G 166M 1.7G 9% 3410 282412 1% / > /dev/sd0l 98.4G 3.9G 89.6G 4% 458 13147444 0% /home > /dev/sd0e 3.9G 8.0K 3.7G 0% 5 545657 0% /tmp > /dev/sd0h 9.8G 2.9G 6.5G 31% 271627 1053555 20% /usr > /dev/sd0i 9.8G 2.3G 7.1G 24% 59013 1266169 4% > /usr/local > /dev/sd0j 2.0G 1.1G 834M 56% 33455 252367 12% /usr/obj > /dev/sd0k 2.0G 509M 1.4G 27% 25574 260248 9% > /usr/xobj > /dev/sd0f 7.9G 18.5M 7.5G 0% 1546 1063796 0% /var > /dev/sd0g 7.9G 570K 7.5G 0% 70 1065272 0% /var/log > so any problem should be on sd0h. I've rebooted to single-user mode and > run 'fsck -f /dev/sd0h', which showed no errors -- but the weird > behavior of ls and rm persists. > > I don't see anything in the errata for 5.5 which looks like it would > affect this. If nobody has any bright ideas, I'll try upgrading to the > latest snapshot and see if that changes anything. > > Dave > > OpenBSD 5.5 (GENERIC.MP) #315: Wed Mar 5 09:37:46 MST 2014 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 6371405824 (6076MB) > avail mem = 6193184768 (5906MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe67b0 (33 entries) > bios0: vendor Hewlett-Packard version "F.02" date 10/03/2011 > bios0: Hewlett-Packard HP Pavilion dv7 Notebook PC > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC SSDT BOOT ASPT SSDT SSDT > SSDT SSDT > acpi0: wakeup devices P0P1(S3) LID_(S3) GLAN(S4) EHC1(S3) EHC2(S3) HDEF(S0) > PXSX(S4) RP01(S4) PXSX(S4) RP02(S3) PXSX(S4) RP03(S3) PXSX(S4) RP04(S3) > PXSX(S4) RP05(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.78 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 1, core 1, package 0 > cpu4 at mainbus0: apid 4 (application processor) > cpu4: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz > cpu4: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu4: 256KB 64b/line 8-way L2 cache > cpu4: smt 0, core 2, package 0 > cpu5 at mainbus0: apid 5 (application processor) > cpu5: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz > cpu5: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu5: 256KB 64b/line 8-way L2 cache > cpu5: smt 1, core 2, package 0 > cpu6 at mainbus0: apid 6 (application processor) > cpu6: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz > cpu6: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu6: 256KB 64b/line 8-way L2 cache > cpu6: smt 0, core 3, package 0 > cpu7 at mainbus0: apid 7 (application processor) > cpu7: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz > cpu7: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu7: 256KB 64b/line 8-way L2 cache > cpu7: smt 1, core 3, package 0 > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (P0P1) > acpiprt2 at acpi0: bus 1 (RP01) > acpiprt3 at acpi0: bus 7 (RP02) > acpiprt4 at acpi0: bus 13 (RP03) > acpiprt5 at acpi0: bus 19 (RP04) > acpiprt6 at acpi0: bus -1 (RP05) > acpiprt7 at acpi0: bus -1 (RP06) > acpiprt8 at acpi0: bus -1 (RP07) > acpiprt9 at acpi0: bus -1 (RP08) > acpiprt10 at acpi0: bus -1 (PEG0) > acpiprt11 at acpi0: bus -1 (PEG1) > acpiprt12 at acpi0: bus -1 (PEG2) > acpiprt13 at acpi0: bus -1 (PEG3) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpicpu2 at acpi0: C3, C2, C1, PSS > acpicpu3 at acpi0: C3, C2, C1, PSS > acpicpu4 at acpi0: C3, C2, C1, PSS > acpicpu5 at acpi0: C3, C2, C1, PSS > acpicpu6 at acpi0: C3, C2, C1, PSS > acpicpu7 at acpi0: C3, C2, C1, PSS > acpitz0 at acpi0: critical temperature is 99 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: PWRB > acpibat0 at acpi0: BAT0 model "8850" serial Li4402A type Li oem " > Hewlett-Packard " > acpiac0 at acpi0: AC unit online > acpidock0 at acpi0: DOCK not docked (0) > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD02 > cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2001, 2000, 1900, 1800, 1700, > 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09 > intagp0 at vga1 > agp0 at intagp0: aperture at 0xb0000000, size 0x10000000 > inteldrm0 at vga1 > drm0 at inteldrm0 > inteldrm0: 1600x900 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi > azalia0: codecs: IDT 92HD81B1X, Intel/0x2805, using IDT 92HD81B1X > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL > (0x2c80), msi, address 2c:41:38:62:07:07 > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5 > ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb5: msi > pci2 at ppb1 bus 7 > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: msi, MIMO > 1T2R, BGS, address 74:e5:0b:1f:01:62 > ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb5: msi > pci3 at ppb2 bus 13 > rtsx0 at pci3 dev 0 function 0 "Realtek RTS5209 Card Reader" rev 0x01: msi > sdmmc0 at rtsx0 > "Realtek RTS5209 Card Reader" rev 0x01 at pci3 dev 0 function 1 not configured > ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb5: msi > pci4 at ppb3 bus 19 > "NEC xHCI" rev 0x04 at pci4 dev 0 function 0 not configured > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int 20 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel HM65 LPC" rev 0x05 > ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3 > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, ST9750423AS, 0001> SCSI3 0/direct fixed > naa.5000c50044718f26 > sd0: 715404MB, 512 bytes/sector, 1465149168 sectors > cd0 at scsibus0 targ 5 lun 0: <hp, BD CMB UJ141AF, 1.00> ATAPI 5/cdrom > removable > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 0 int > 19 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM > spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 7.5 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > ugen0 at uhub2 port 1 "Validity Sensors product 0x0018" rev 1.10/0.78 addr 3 > uvideo0 at uhub2 port 2 configuration 1 interface 0 "SuYin > HP TrueVision HD" rev 2.00/1.10 addr 4 > video0 at uvideo0 > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on sd0a (c3ffcff67dc13a92.a) swap on sd0b dump on sd0b > > -- > Dave Anderson > <[email protected]> > -- --------------------------------------------------------------------------------------------------------------------- () ascii ribbon campaign - against html e-mail /\
