I'm having troubles installing OpenBSD 5.5 (amd64) on a mSATA SSD card (
http://pcengines.ch/msata16a.htm) PC Engines APU.1C device (
http://pcengines.ch/apu.htm) with the most recent BIOS version.
I've made several attempts, using install55.fs copied to an SD card, with
both 5.5-release and 5.5-current (June 6th snapshot).
Most attempts have failed, either during the install (filesystem creation
phase or during the sets extraction phase) or during the first boot after
the initial install (case reported in this message).
I wonder if I have a faulty SSD unit.
In any case, here's my dmesg:
ddb{1}> dmesg
OpenBSD 5.5 (GENERIC.MP) #315: Wed Mar 5 09:37:46 MST 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4245995520 (4049MB)
avail mem = 4124356608 (3933MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdf16d820 (6 entries)
bios0: vendor coreboot version "SageBios_PCEngines_APU-45" date 04/05/2014
bios0: PC Engines APU
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SPCR HPET APIC HEST SSDT SSDT SSDT
acpi0: wakeup devices AGPB(S4) HDMI(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4)
PE2
0(S4) PE21(S4) PE22(S4) PE23(S4) PIBR(S4) UOH1(S3) UOH2(S3) UOH3(S3)
UOH4(S3) U
OH5(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD G-T40E Processor, 1000.14 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LA
HF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB
64b/line 1
6-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 200MHz
cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD G-T40E Processor, 1000.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LA
HF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB
64b/line 1
6-way L2 cache
cpu1: 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpiprt0 at acpi0: bus -1 (AGPB)
acpiprt1 at acpi0: bus -1 (HDMI)
acpiprt2 at acpi0: bus 1 (PBR4)
acpiprt3 at acpi0: bus 2 (PBR5)
acpiprt4 at acpi0: bus 3 (PBR6)
acpiprt5 at acpi0: bus -1 (PBR7)
acpiprt6 at acpi0: bus 5 (PE20)
acpiprt7 at acpi0: bus -1 (PE21)
acpiprt8 at acpi0: bus -1 (PE22)
acpiprt9 at acpi0: bus -1 (PE23)
acpiprt10 at acpi0: bus 0 (PCI0)
acpiprt11 at acpi0: bus 4 (PIBR)
acpicpu0 at acpi0: C2, PSS
acpicpu1 at acpi0: C2, PSS
acpibtn0 at acpi0: PWRB
cpu0: 1000 MHz: speeds: 1000 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E
(0x2c00), m
si, address 00:0d:b9:33:98:cc
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4
ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E
(0x2c00), m
si, address 00:0d:b9:33:98:cd
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 4
ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
re2 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E
(0x2c00), m
si, address 00:0d:b9:33:98:ce
rgephy2 at re2 phy 7: RTL8169S/8110S PHY, rev. 4
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19,
AHCI 1
.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SuperSSpeed mSAT, V462> SCSI3 0/direct
fixe
d t10.ATA_SuperSSpeed_mSATA_SSD_16GB_YTAF14050000A_
sd0: 15258MB, 512 bytes/sector, 31248704 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
versio
n 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
versio
n 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.0ev 20 function 0 "ATI SBx00 SMBus"
rev 0x42: polling
iic0 at piixpm0
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci4 at ppb3 bus 4
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18,
versio
n 1.0, legacy support
ppb4 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
pci5 at ppb4 bus 5
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
versio
n 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
umass0 at uhub2 port 1 configuration 1 interface 0 "Generic Flash Card
Reader/W
riter" rev 2.01/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Multiple, Card Reader, 1.00> SCSI2 0/direct
remo
vable serial.058f6366058F63666485
sd1: 3781MB, 512 bytes/sector, 7744512 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (46dbf9b57adb4fd6.a) swap on sd0b dump on sd0b
/usr/local: bad dir ino 2 at offset 0: mangled entry
panic: bad dir
Stopped at Debugger+0x5: leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, TOO.
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb output, for both cores:
ddb{0}> trace
Debugger() at Debugger+0x5
panic() at panic+0xee
ufs_makedirentry() at ufs_makedirentry
ufs_lookup() at ufs_lookup+0x6cd
VOP_LOOKUP() at VOP_LOOKUP+0x2c
vfs_lookup() at vfs_lookup+0x271
namei() at namei+0x21c
dofstatat() at dofstatat+0x7c
syscall() at syscall+0x24f
--- syscall (number 38) ---
end of kernel
end trace frame: 0x7f7ffffbfa50, count: -9
acpi_pdirpa+0x421a2a:
ddb{0}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
5329 28905 29648 83 3 0x90 poll ntpd
28905 29648 29648 83 3 0x90 poll ntpd
29648 1 29648 0 3 0x80 poll ntpd
12106 13468 13468 74 3 0x90 bpf pflogd
13468 1 13468 0 3 0x80 netio pflogd
20963 11762 11762 73 7 0x90 syslogd
11762 1 11762 0 3 0x80 netio syslogd
* 8604 1 8604 0 7 0x3 sh
9174 0 0 0 3 0x4200 aiodoned aiodoned
9654 0 0 0 3 0x4200 syncer update
7845 0 0 0 3 0x4200 cleaner cleaner
11574 0 0 0 3 0x4200 reaper reaper
620 0 0 0 3 0x4200 pgdaemon pagedaemon
1282 0 0 0 3 0x4200 bored crypto
19264 0 0 0 3 0x4200 pftm pfpurge
30722 0 0 0 3 0x4200 bored sensors
13214 0 0 0 3 0x4200 usbtsk usbtask
9748 0 0 0 3 0x4200 usbatsk usbatsk
16985 0 0 0 3 0x40004200 acpi0 acpi0
1284 0 0 0 3 0x40004200 idle1
3572 0 0 0 3 0x4200 bored systq
23316 0 0 0 3 0x4200 bored syswq
17082 0 0 0 3 0x40004200 idle0
1 0 1 0 3 0x82 wait init
0 -1 0 0 3 0x200 scheduler swapper
ddb{0}> mach ddbcpu 1
Stopped at Debugger+0x5: leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, TOO.
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb{1}> trace
Debugger() at Debugger+0x5
x86_ipi_handler() at x86_ipi_handler+0x64
Xresume_lapic_ipi() at Xresume_lapic_ipi+0x1b
--- interrupt ---
Bad frame pointer: 0xffff80002207bc78
end trace frame: 0xffff80002207bc78, count: -3
__mp_lock+0x55:
ddb{1}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
5329 28905 29648 83 3 0x90 poll ntpd
28905 29648 29648 83 3 0x90 poll ntpd
29648 1 29648 0 3 0x80 poll ntpd
12106 13468 13468 74 2 0x490 pflogd
13468 1 13468 0 3 0x80 netio pflogd
*20963 11762 11762 73 7 0x90 syslogd
11762 1 11762 0 3 0x80 netio syslogd
8604 1 8604 0 7 0x3 sh
9174 0 0 0 3 0x4200 aiodoned aiodoned
9654 0 0 0 2 0x4200 update
7845 0 0 0 3 0x4200 cleaner cleaner
11574 0 0 0 3 0x4200 reaper reaper
620 0 0 0 3 0x4200 pgdaemon pagedaemon
1282 0 0 0 3 0x4200 bored crypto
19264 0 0 0 2 0x4600 pfpurge
30722 0 0 0 2 0x4200 sensors
13214 0 0 0 3 0x4200 usbtsk usbtask
9748 0 0 0 3 0x4200 usbatsk usbatsk
16985 0 0 0 3 0x40004200 acpi0 acpi0
1284 0 0 0 3 0x40004200 idle1
3572 0 0 0 2 0x4200 systq
23316 0 0 0 3 0x4200 bored syswq
17082 0 0 0 3 0x40004200 idle0
1 0 1 0 3 0x82 wait init
0 -1 0 0 2 0x200 swapper
Thanks,
-- jbm
