I am trying to change my default output device from my builtin soundcard
to an usb soundcard which is an output only device. I have tried:
# audioctl -f /dev/audio1
audioctl: /dev/audio1: Device not configured
I think there should be some controller that you configuring the audio
device. But i manually tried to change the symlinks in the dev directory:
# ls -la * | grep -E "mixer|audio"
lrwxr-xr-x 1 root wheel 6 Jun 3 16:58 audio -> audio1
crw-rw-rw- 1 root wheel 42, 128 Jun 3 17:01 audio0
crw-rw-rw- 1 root wheel 42, 129 May 28 19:07 audio1
crw-rw-rw- 1 root wheel 42, 130 May 28 19:07 audio2
lrwxr-xr-x 1 root wheel 9 Jun 3 16:58 audioctl -> audioctl1
crw-rw-rw- 1 root wheel 42, 192 May 28 19:07 audioctl0
crw-rw-rw- 1 root wheel 42, 193 May 28 19:07 audioctl1
crw-rw-rw- 1 root wheel 42, 194 May 28 19:07 audioctl2
lrwxr-xr-x 1 root wheel 6 Jun 3 16:58 mixer -> mixer1
crw-rw-rw- 1 root wheel 42, 16 May 28 19:07 mixer0
crw-rw-rw- 1 root wheel 42, 17 May 28 19:07 mixer1
crw-rw-rw- 1 root wheel 42, 18 May 28 19:07 mixer2
But it is still defaulting to my builtin soundcard. How can i change the
default sounddevice from audio0 to audio1?
/Regards
Johan Svensson
DMESG:
dmesg | grep audio
audio0 at azalia0
audio0 at azalia0
audio0 at azalia0
audio0 at azalia0
uaudio0 at uhub2 port 1 configuration 1 interface 1 "NuForce, Inc.
NuForce \M-5DAC 2" rev 1.10/0.01 addr 3
uaudio0: ignored setting with type 8193 format
uaudio0: audio rev 1.00, 2 mixer controls
audio1 at uaudio0
