Tomas,
I realize the output I sent was partial, but think about it from my
point of view. I'm not able to network the system, so SSH is
impossible. Am I supposed to send digital pictures as attachments?
IMHO an absurd waste of both your time and mine, not to mention wasted
bandwidth. I wrote in text form the information that I thought would
be most helpful. Now that I've managed to transfer the text output
with a USB flash disk (transferring files this way is another odyssey,
I hope someday soon Linux and BSD get over their silly "political"
diferences, but I digress), I'll send it in its entirety. I'd be the
first to admit I may have misconfigured this due to my inexperience,
but since I have done similar configurations with (Classic, OS 9)
Macs, Mac OS X (since before the public betas, developers previews and
so on), Windows XP, Vista, 7, Linux (mainly Ubuntu, but also some
OpenSuse and Redhat variants), I maybe unfamiliar with OpenBSD, but
TCP/IP in general is NOT new to me.
I think Giancarlo (next reply after you) may be onto something. That
the ISP's upstream router may be configured well enough for the
"unwashed" Mac/WIndows/even Linux masses, but refuses to work with
OpenBSD. I saw in the OpenBSD console that their router was trying to
send arp packets to OpenBSD, which were rejected (not conforming to
any RFC) or blocked (by pf). I do not have the text of that, but I
will try to reproduce it.
In any case, here I attach the text output from OpenBSD:
OpenBSD 5.4 (GENERIC) #37: Tue Jul 30 12:05:01 MDT 2013
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 669 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE,PERF
real mem = 266858496 (254MB)
avail mem = 251047936 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/29/02, BIOS32 rev. 0 @ 0xfb140, SMBIOS
rev. 2.2 @ 0xf0800 (35 entries)
bios0: vendor Award Software International, Inc. version "6.00 PG" date
01/29/2002
bios0: Gigabyte Technology Co., Ltd. i815-ITE8712
apm0 at bios0: Power Management spec V1.2 (slowidle)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb5c0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf00/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 5 9 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xcc000/0x7400
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82815 Video" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x4000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
rl0 at pci1 dev 0 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:40:f4:44:07:56
rlphy0 at rl0 phy 0: RTL internal PHY
wi0 at pci1 dev 1 function 0 "Intersil PRISM2.5" rev 0x01: irq 9
wi0: PRISM2.5 ISL3874A(Mini-PCI) (0x8013), Firmware 1.1.1 (primary), 1.7.4
(station), address 00:09:5b:41:33:d1
rl1 at pci1 dev 2 function 0 "Realtek 8139" rev 0x10: irq 5, address
4c:00:10:3c:23:5c
rlphy1 at rl1 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x02: 24-bit timer
at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x02: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 2R015H1>
wd0: 16-sector PIO, LBA, 14305MB, 29297520 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-540E, 1.0A> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x02: irq 9
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x02: irq 9
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x02: irq 9, ICH2 AC97
ac97: codec id 0x83847600 (SigmaTel STAC9700)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8712F rev 3, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (4fce327cf483eb39.a) swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33192
priority: 0
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff000000
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:40:f4:44:07:56
priority: 0
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.6.6 netmask 0xffffff00 broadcast 192.168.6.255
inet6 fe80::240:f4ff:fe44:756%rl0 prefixlen 64 scopeid 0x1
wi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:09:5b:41:33:d1
priority: 4
groups: wlan
media: IEEE802.11 autoselect (none)
ieee80211: nwid IBSS chan 3 bssid 44:44:44:44:44:44 3dBm (auto)
hidenwid,nobridge
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 4c:00:10:3c:23:5c
priority: 0
groups: egress
media: Ethernet autoselect (none)
status: no carrier
inet 188.126.4.24 netmask 0xffffff00 broadcast 188.126.4.255
inet6 fe80::4e00:10ff:fe3c:235c%rl1 prefixlen 64 scopeid 0x3
enc0: flags=0<>
priority: 0
groups: enc
status: active
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33192
priority: 0
groups: pflog
188.126.4.1
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 188.126.4.1 GS 0 368 - 8 rl1
127/8 127.0.0.1 UGRS 0 0 33192 8 lo0
127.0.0.1 127.0.0.1 UH 1 0 33192 4 lo0
188.126.4/24 link#3 C 1 0 - 4 rl1
188.126.4.1 link#3 HRLc 1 0 - 4 rl1
192.168.6/24 link#1 C 0 0 - 4 rl0
224/4 127.0.0.1 URS 0 0 33192 8 lo0
Internet6:
Destination Gateway Flags Refs
Use Mtu Prio Iface
::/104 ::1 UGRS 0
0 - 8 lo0
::/96 ::1 UGRS 0
0 - 8 lo0
::1 ::1 UH 14
0 33192 4 lo0
::127.0.0.0/104 ::1 UGRS 0
0 - 8 lo0
::224.0.0.0/100 ::1 UGRS 0
0 - 8 lo0
::255.0.0.0/104 ::1 UGRS 0
0 - 8 lo0
::ffff:0.0.0.0/96 ::1 UGRS 0
0 - 8 lo0
2002::/24 ::1 UGRS 0
0 - 8 lo0
2002:7f00::/24 ::1 UGRS 0
0 - 8 lo0
2002:e000::/20 ::1 UGRS 0
0 - 8 lo0
2002:ff00::/24 ::1 UGRS 0
0 - 8 lo0
fe80::/10 ::1 UGRS 0
0 - 8 lo0
fe80::%rl0/64 link#1 C 0
0 - 4 rl0
fe80::240:f4ff:fe44:756%rl0 00:40:f4:44:07:56 HL 0
0 - 4 lo0
fe80::%rl1/64 link#3 C 0
0 - 4 rl1
fe80::4e00:10ff:fe3c:235c%rl1 4c:00:10:3c:23:5c HL 0
0 - 4 lo0
fe80::%lo0/64 fe80::1%lo0 U 0
0 - 4 lo0
fe80::1%lo0 link#5 UHL 0
0 - 4 lo0
fec0::/10 ::1 UGRS 0
0 - 8 lo0
ff01::/16 ::1 UGRS 0
0 - 8 lo0
ff01::%rl0/32 link#1 C 0
0 - 4 rl0
ff01::%rl1/32 link#3 C 0
0 - 4 rl1
ff01::%lo0/32 fe80::1%lo0 UC 0
0 - 4 lo0
ff02::/16 ::1 UGRS 0
0 - 8 lo0
ff02::%rl0/32 link#1 C 0
0 - 4 rl0
ff02::%rl1/32 link#3 C 0
0 - 4 rl1
ff02::%lo0/32 fe80::1%lo0 UC 0
0 - 4 lo0
# Generated by rl0 dhclient
#nameserver 10.42.0.1
nameserver 188.126.0.66
nameserver 188.126.0.2
lookup file bind
