Yesterday I loaded OpenBSD 5.5-current on an old notebook (ThinkPad
a31p). I had not used OpenBSD on that particular notebook for a few
years. I run OpenBSD in character-based command line mode.
The screen on the notebook is a dense 1600x1200 pixels on 12x9
inches. Something called drm is giving me 132x50 characters on the
screen. Tiny, little characters in a serif font. These old eyes
need larger characters. :)
I've looked and searched, but I've been unable to find a way return
to the usual 80x25, or even 80x40, screen setup. Is it possible to
change the font in drm? Is it possible to disable drm and get back
the 80x25 screen?
Thanks.
dmseg:
OpenBSD 5.5-current (GENERIC) #0: Fri Mar 21 22:31:58 EDT 2014
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz ("GenuineIntel"
686-class) 1.70 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PERF
real mem = 1072656384 (1022MB)
avail mem = 1042726912 (994MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/05/05, BIOS32 rev. 0 @
0xfd7e0, SMBIOS rev. 2.31 @ 0xe0010 (51 entries)
bios0: vendor IBM version "1GET40WW (1.12 )" date 04/05/2005
bios0: IBM 2653H4U
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT BOOT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S4) PCI1(S4)
DOCK(S4) USB0(S3) USB1(S3) USB2(S3) AC97(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0: C3, C2, FVS, 1700, 1200 MHz
acpipwrres0 at acpi0: PUBS, resource for USB0, USB1
acpitz0 at acpi0: critical temperature is 94 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "IBM-COMPATIBLE" serial 17772 type LION
oem "PS"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: DOCK not docked (0)
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000
0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI FireGL Mobility 7800 M7" rev
0x00
drm0 at radeondrm0
radeondrm0: irq 11
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq
11
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq
11
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x02: irq
11
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
2:0:0: mem address conflict 0x50000000/0x1000
2:0:1: mem address conflict 0x50100000/0x1000
cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xa8: irq 11
cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xa8: irq 11
"Ricoh 5C552 Firewire" rev 0x00 at pci2 dev 0 function 2 not
configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42, i82562:
irq 11, address 00:0e:
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <HTS721080G9AT00>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA720 DVD/CDRW, 1.03>
ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02:
irq 11
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02:
irq 11, ICH3 AC97
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not
configured
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (1376e8d81b759ba7.a) swap on wd0b dump on wd0b
drm: initializing kernel modesetting (RV200 0x1002:0x4C58
0x1014:0x0518).
radeondrm0: GTT: 64M 0xE0000000 - 0xE3FFFFFF
radeondrm0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (64M
used)
drm: Panel ID String: 1600x1200
drm: Panel Size 1600x1200
drm: No TV DAC info found in BIOS
radeondrm0: 1600x1200
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using
wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
