Hello, I got an Asus K52F recently. I repair it, because the keyboard and battery were dead. I also cleaned the dust and reapplied thermal grease.
On the dark side, on Linux, the temperature is at 45c at idle, on load at 55c. On OpenBSD is near 64c idle and on load up to 85c. With the acpi everything is working: brightness, volume, suspend, hotkeys. These are idle temps # sysctl hw.sensors hw.sensors.cpu0.temp0=65.00 degC hw.sensors.cpu1.temp0=65.00 degC hw.sensors.cpu2.temp0=65.00 degC hw.sensors.cpu3.temp0=65.00 degC hw.sensors.acpitz0.temp0=57.00 degC (zone temperature) hw.sensors.acpiac0.indicator0=Off (power supply) hw.sensors.acpibat0.volt0=10.80 VDC (voltage) hw.sensors.acpibat0.volt1=10.65 VDC (current voltage) hw.sensors.acpibat0.power0=25.95 W (rate) hw.sensors.acpibat0.watthour0=48.39 Wh (last full capacity) hw.sensors.acpibat0.watthour1=4.84 Wh (warning capacity) hw.sensors.acpibat0.watthour2=0.48 Wh (low capacity) hw.sensors.acpibat0.watthour3=23.33 Wh (remaining capacity), OK hw.sensors.acpibat0.raw0=1 (battery discharging), OK hw.sensors.acpibtn0.indicator0=On (lid open) hw.sensors.itherm0.temp1=54.05 degC (Core 1) hw.sensors.itherm0.temp4=57.00 degC (CPU/GPU Max temp) hw.sensors.itherm0.temp9=57.00 degC (GPU/Memory controller abs.) hw.sensors.itherm0.temp10=59.00 degC (PCH abs.) hw.sensors.itherm0.power0=5.00 W (CPU power consumption) # apm Battery state: low, 47% remaining, 52 minutes life estimate A/C adapter state: not connected Performance adjustment mode: manual (933 MHz) # sysctl hw.setperf hw.setperf=0 # dmesg OpenBSD 5.4-current (GENERIC.MP) #59: Tue Sep 17 08:43:41 MDT 2013 [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3050057728 (2908MB) avail mem = 2960818176 (2823MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xec3d0 (77 entries) bios0: vendor American Megatrends Inc. version "K52F.218" date 07/12/2011 bios0: ASUSTeK Computer Inc. K52F acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC DBGP ECDT SLIC MCFG HPET SSDT acpi0: wakeup devices PEG4(S4) PEG5(S4) PEG6(S4) P0P1(S4) EHC1(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EHC2(S3) USB5(S3) USB6(S3) USB7(S3) HDEF(S4) RP01(S4) RP02(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, 2394.35 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 cpu0: apic clock running at 132MHz cpu1 at mainbus0: apid 4 (application processor) cpu1: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, 2393.99 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 2, package 0 cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, 2393.99 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 1, core 0, package 0 cpu3 at mainbus0: apid 5 (application processor) cpu3: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, 2393.99 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 2, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpiec0 at acpi0 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG1) acpiprt2 at acpi0: bus -1 (PEG3) acpiprt3 at acpi0: bus -1 (PEG5) acpiprt4 at acpi0: bus 5 (P0P1) acpiprt5 at acpi0: bus 1 (RP01) acpiprt6 at acpi0: bus 2 (RP02) acpiprt7 at acpi0: bus -1 (RP04) acpiprt8 at acpi0: bus -1 (RP05) acpiprt9 at acpi0: bus 4 (RP06) acpiprt10 at acpi0: bus -1 (RP07) acpiprt11 at acpi0: bus -1 (RP08) acpiprt12 at acpi0: bus 3 (RP03) acpicpu0 at acpi0: C3, C1, PSS acpicpu1 at acpi0: C3, C1, PSS acpicpu2 at acpi0: C3, C1, PSS acpicpu3 at acpi0: C3, C1, PSS acpitz0 at acpi0: critical temperature is 93 degC acpiac0 at acpi0: AC unit offline acpibat0 at acpi0: BAT0 model "K52F-44" serial type LIon oem "ASUSTek" acpiasus at acpi0 not configured acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2399, 2266, 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199, 1066, 933 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x18 vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x18 intagp0 at vga1 agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1366x768 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 2 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x06: msi pci2 at ppb1 bus 2 athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17 athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 48:5d:60:5d:c4:08 ppb2 at pci0 dev 28 function 2 "Intel 3400 PCIE" rev 0x06: msi pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x06: msi pci4 at ppb3 bus 4 "JMicron SD/MMC" rev 0x80 at pci4 dev 0 function 0 not configured sdhc0 at pci4 dev 0 function 2 "JMicron SD Host Controller" rev 0x80: apic 2 int 18 sdmmc0 at sdhc0 "JMicron Memory Stick" rev 0x80 at pci4 dev 0 function 3 not configured "JMicron xD" rev 0x80 at pci4 dev 0 function 4 not configured jme0 at pci4 dev 0 function 5 "JMicron JMC250" rev 0x03: apic 2 int 17, address 20:cf:30:d2:3b:6c jmphy0 at jme0 phy 1: JMP211 10/100/1000 PHY, rev. 1 ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6 pci5 at ppb4 bus 5 pcib0 at pci0 dev 31 function 0 "Intel HM55 LPC" rev 0x06 ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3 ahci0: PHY offline on port 4 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, ST9320325AS, 0003> SCSI3 0/direct fixed naa.5000c5002bc86d95 sd0: 305245MB, 512 bytes/sector, 625142448 sectors cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GT32N, AS01> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM spdmem1 at iic0 addr 0x52: 1GB DDR3 SDRAM PC3-8500 SO-DIMM itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x06 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Elantech Touchpad, version 2 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 pci6 at mainbus0 bus 255 pchb1 at pci6 dev 0 function 0 "Intel QuickPath" rev 0x05 pchb2 at pci6 dev 0 function 1 "Intel QuickPath" rev 0x05 pchb3 at pci6 dev 2 function 0 "Intel QPI Link" rev 0x05 pchb4 at pci6 dev 2 function 1 "Intel QPI Physical" rev 0x05 pchb5 at pci6 dev 2 function 2 "Intel Reserved" rev 0x05 pchb6 at pci6 dev 2 function 3 "Intel Reserved" rev 0x05 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uvideo0 at uhub2 port 2 configuration 1 interface 0 "Sonix Technology Co., Ltd. USB 2.0 Camera" rev 2.00/12.11 addr 3 video0 at uvideo0 uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 umass0 at uhub3 port 3 configuration 1 interface 0 "Kingston DT 101 G2" rev 2.00/1.00 addr 3 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: <Kingston, DT 101 G2, PMAP> SCSI2 0/direct removable serial.09306545ED10E9300069 sd1: 14887MB, 512 bytes/sector, 30489408 sectors vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (9e39ae37444037ce.a) swap on sd0b dump on sd0b athn0: device timeout athn0: device timeout video0 detached uvideo0 detached uhub2 detached uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uvideo0 at uhub2 port 2 configuration 1 interface 0 "Sonix Technology Co., Ltd. USB 2.0 Camera" rev 2.00/12.11 addr 3 video0 at uvideo0 uhub3 detached Any other output please let me know :) Thanks!
