Hello,
I can't figure out what causes this panic. Second time
I see this. I think I have to replace the NIC or the disk.
Can anyone point me in the right direction?
Thanks,
Sebastian
OpenBSD 5.3-current (GENERIC) #149: Tue May 7 12:44:38 MDT 2013
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz ("GenuineIntel" 686-class) 2.68 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,CNXT-ID,PERF
real mem = 1073213440 (1023MB)
avail mem = 1044254720 (995MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/11/02, BIOS32 rev. 0 @ 0xfb3d0, SMBIOS
rev. 2.3 @ 0xf0800 (32 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 09/11/2002
bios0: MEDIONPC MS-6701
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices FUTS(S4) USB0(S5) USB1(S5) USB2(S5) USB3(S5) MAC0(S5)
AMR0(S4) UAR1(S5) PS2M(S5) PS2K(S4) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 14, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: FUTS
bios0: ROM list: 0xc0000/0xf800 0xd0000/0x8000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SiS 648 PCI" rev 0x02
sisagp0 at pchb0
agp0 at sisagp0: aperture at 0xe0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0 "SiS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce FX 5900 Ultra" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x04
"SiS 7007 FireWire" rev 0x00 at pci0 dev 2 function 3 not configured
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 648: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST52520A>
wd0: 16-sector PIO, LBA, 2446MB, 5009760 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: apic 2 int 18,
SiS7012 AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 20,
version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 21,
version 1.0, legacy support
ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 22,
version 1.0, legacy support
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x91: apic 2 int 19,
address 00:10:dc:7e:88:23
rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1
em0 at pci0 dev 6 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 2 int
17, address 90:e2:ba:30:ba:a0
pciide1 at pci0 dev 7 function 0 "CMD Technology SiI3114 SATA" rev 0x02: DMA
pciide1: using apic 2 int 18 for native-PCI interrupt
pciide1: port 2: device present, speed: 1.5Gb/s
wd1 at pciide1 channel 2 drive 0: <SAMSUNG HN-M101MBB>
wd1: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd1(pciide1:2:0): using BIOS timings, Ultra-DMA mode 6
pciide1: port 3: device present, speed: 1.5Gb/s
wd2 at pciide1 channel 3 drive 0: <SAMSUNG HN-M101MBB>
wd2: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd2(pciide1:3:0): using BIOS timings, Ultra-DMA mode 6
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot #0)
pckbc0: using irq 12 for aux slot #0
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x16
lm1 at wbsio0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "SiS OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
sd0 at scsibus1 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed
sd0: 953869MB, 512 bytes/sector, 1953524576 sectors
root on wd0a (58c4113a2922eb55.a) swap on wd0b dump on wd0b
uvm_fault(0xd6c73184, 0xb5cbd000, 0, 3) -> e
kernel: page fault trap, code=0
Stopped at ieee80211_newstate+0x28d: addb %cl,0xc0832434(%ecx)
ddb> PID PPID PGRP UID S FLAGS WAIT COMMAND
*30951 19754 30951 0 7 0 ksh
23578 1 23578 1000 3 0x80 select ssh-agent
24067 1 24067 0 3 0x80 ttyin getty
16193 1 16193 0 3 0x80 ttyin getty
3033 1 3033 0 3 0x80 ttyin getty
9425 1 9425 0 3 0x80 ttyin getty
19754 1 19754 1000 3 0x88 pause ksh
1500 1 1500 0 3 0x80 select cron
2529 1 2529 0 3 0x80 kqread apmd
21681 1 21681 99 3 0x80 poll sndiod
4079 7543 7543 67 3 0x80 kqread nginx
7543 1 7543 0 3 0x88 pause nginx
8919 11014 11014 95 3 0x80 kqread smtpd
4447 11014 11014 95 3 0x80 kqread smtpd
28915 11014 11014 95 3 0x80 kqread smtpd
9387 11014 11014 95 3 0x80 kqread smtpd
5195 11014 11014 95 3 0x80 kqread smtpd
17098 11014 11014 95 3 0x80 kqread smtpd
277 11014 11014 95 3 0x80 kqread smtpd
26665 11014 11014 95 3 0x80 kqread smtpd
11014 1 11014 0 3 0x80 kqread smtpd
16438 1 16438 0 3 0x80 select sshd
8690 1 8690 0 3 0x80 poll rpc.statd
11492 1 11492 0 3 0x80 poll rpc.lockd
29479 13922 13922 0 3 0 inode nfsd
7925 13922 13922 0 3 0 inode nfsd
13266 13922 13922 0 3 0 inode nfsd
11789 13922 13922 0 3 0 biowait nfsd
13922 1 13922 0 3 0x80 netcon nfsd
29233 1 29233 0 3 0x80 select mountd
17825 14319 14319 74 3 0x80 bpf pflogd
25919 1 25919 28 3 0x80 poll portmap
14319 1 14319 0 3 0x80 netio pflogd
7192 15195 15195 73 2 0x80 syslogd
15195 1 15195 0 3 0x80 netio syslogd
28336 0 0 0 3 0x100280 nfsidl nfsio
23896 0 0 0 3 0x100280 nfsidl nfsio
14664 0 0 0 3 0x100280 nfsidl nfsio
5569 0 0 0 3 0x100280 nfsidl nfsio
1345 0 0 0 3 0x100280 nfsidl nfsio
13593 0 0 0 3 0x100280 nfsidl nfsio
6968 0 0 0 3 0x100280 nfsidl nfsio
16777 0 0 0 3 0x100280 nfsidl nfsio
22959 0 0 0 3 0x100280 nfsidl nfsio
29904 0 0 0 3 0x100280 nfsidl nfsio
19179 0 0 0 3 0x100280 nfsidl nfsio
966 0 0 0 3 0x100280 nfsidl nfsio
7227 0 0 0 3 0x100280 nfsidl nfsio
3022 0 0 0 3 0x100280 nfsidl nfsio
30633 0 0 0 3 0x100280 nfsidl nfsio
17216 0 0 0 3 0x100280 nfsidl nfsio
29235 0 0 0 3 0x100280 nfsidl nfsio
14590 0 0 0 3 0x100280 nfsidl nfsio
15566 0 0 0 3 0x100280 nfsidl nfsio
1806 0 0 0 3 0x100280 nfsidl nfsio
15 0 0 0 3 0x100200 aiodoned aiodoned
14 0 0 0 3 0x100200 syncer update
13 0 0 0 3 0x100200 cleaner cleaner
12 0 0 0 3 0x100200 reaper reaper
11 0 0 0 3 0x100200 pgdaemon pagedaemon
10 0 0 0 3 0x100200 bored srdis
9 0 0 0 3 0x100200 bored crypto
8 0 0 0 3 0x100200 pftm pfpurge
7 0 0 0 3 0x100200 usbtsk usbtask
6 0 0 0 3 0x100200 usbatsk usbatsk
5 0 0 0 3 0x40100200 acpi0 acpi0
4 0 0 0 3 0x100200 bored syswq
3 0 0 0 3 0x40100200 idle0
2 0 0 0 3 0x100200 kmalloc kmthread
1 0 1 0 3 0x80 wait init
0 -1 0 0 3 0x200 scheduler swapper
ddb> ieee80211_newstate(f548ad30,3f8,f548ad58,d6e21e04,f548aebc) at
ieee80211_newstate+0x28d
VOP_LOOKUP(d6e21e04,f548aebc,f548aed0,d042f358,d6c73188) at VOP_LOOKUP+0x2f
vfs_lookup(f548aea8,d6c69400,400,f548aec4,d6c73188) at vfs_lookup+0x27d
namei(f548aea8,823a2001,0,2,0) at namei+0x221
dofstatat(d6c6c2e8,ffffff9c,81c25b08,cfbf6cdc,0) at dofstatat+0x5d
sys_stat(d6c6c2e8,f548af64,f548af84,f548afa8,d6c73184) at sys_stat+0x38
syscall() at syscall+0x227
--- syscall (number 0) ---
0x2:
ddb> ddb>
OpenBSD 5.3-current (GENERIC) #149: Tue May 7 12:44:38 MDT 2013
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz ("GenuineIntel" 686-class) 2.68 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,CNXT-ID,PERF
real mem = 1073213440 (1023MB)
avail mem = 1044254720 (995MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/11/02, BIOS32 rev. 0 @ 0xfb3d0, SMBIOS
rev. 2.3 @ 0xf0800 (32 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 09/11/2002
bios0: MEDIONPC MS-6701
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices FUTS(S4) USB0(S5) USB1(S5) USB2(S5) USB3(S5) MAC0(S5)
AMR0(S4) UAR1(S5) PS2M(S5) PS2K(S4) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 14, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: FUTS
bios0: ROM list: 0xc0000/0xf800 0xd0000/0x8000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SiS 648 PCI" rev 0x02
sisagp0 at pchb0
agp0 at sisagp0: aperture at 0xe0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0 "SiS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce FX 5900 Ultra" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x04
"SiS 7007 FireWire" rev 0x00 at pci0 dev 2 function 3 not configured
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 648: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST52520A>
wd0: 16-sector PIO, LBA, 2446MB, 5009760 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: apic 2 int 18,
SiS7012 AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 20,
version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 21,
version 1.0, legacy support
ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 22,
version 1.0, legacy support
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x91: apic 2 int 19,
address 00:10:dc:7e:88:23
rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1
em0 at pci0 dev 6 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 2 int
17, address 90:e2:ba:30:ba:a0
pciide1 at pci0 dev 7 function 0 "CMD Technology SiI3114 SATA" rev 0x02: DMA
pciide1: using apic 2 int 18 for native-PCI interrupt
pciide1: port 2: device present, speed: 1.5Gb/s
wd1 at pciide1 channel 2 drive 0: <SAMSUNG HN-M101MBB>
wd1: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd1(pciide1:2:0): using BIOS timings, Ultra-DMA mode 6
pciide1: port 3: device present, speed: 1.5Gb/s
wd2 at pciide1 channel 3 drive 0: <SAMSUNG HN-M101MBB>
wd2: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd2(pciide1:3:0): using BIOS timings, Ultra-DMA mode 6
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot #0)
pckbc0: using irq 12 for aux slot #0
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x16
lm1 at wbsio0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "SiS OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
sd0 at scsibus1 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed
sd0: 953869MB, 512 bytes/sector, 1953524576 sectors
root on wd0a (58c4113a2922eb55.a) swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
--
