Hi,
3.8 fails to complete boot. We bought this prior to 3.8 so in addition to
ciss it also does have an LSI MEGARAID 320-1, but it seems that it fails
prior to load the LSI card. 3.7 works like a charm with this configuration.
Any clues on where to look?
Console output below:
>> OpenBSD/i386 PXEBOOT 1.02
switching console to com0
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.8 (RAMDISK_CD) #794: Sat Sep 10 15:58:32 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class)
3.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 1073270784 (1048116K)
avail mem = 973758464 (950936K)
using 4278 buffers containing 53768192 bytes (52508K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #8 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x1400
0xcd400/0x1600 0x
ee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x0c
ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100):
irq 5 address 00:14:38:c4:25:6b
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100):
irq 5 address 00:14:38:c4:25:6a
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
ciss0 at pci3 dev 3 function 0 "Compaq Smart Array 64xx" rev 0x01: irq 5
ciss0: 0 LDs HW rev 1 FW 2.36/2.36
lmap 332e3236:2e330136 fatal integer divide fault in supervisor mode
trap type 8 code 0 eip d012c353 cs 8 eflags 10246 cr2 0 cpl 0
panic: trap type 8, code=0, pc=d012c353
The operating system has halted.
Please press any key to reboot.
--
Runo Fxrrisdahl -
TeleComputing IS http://www.telecomputing.no/
