On Wed, Jan 23, 2013 at 02:33:16AM +1100, Joel Sing wrote:
> On Thu, 3 Jan 2013, Eivind Evensen wrote:
> > On Mon, Dec 31, 2012 at 07:21:08PM +1100, Joel Sing wrote:
> > > On Mon, 31 Dec 2012, Eivind Evensen wrote:
> > > > Hello.
> > > >
> > > > Trying to play around a bit with softraid using vnd reliably results
> > > > in a panic when assembling the raid volume. I think the first time I
> > > > tried this was around 4.9 so it's not something new.
> >
> > ...
> >
>
> FWIW this should now be rectified in -current.
I tried a snapshot downloaded on 21.th
(OpenBSD 5.2-current (GENERIC) #17: Fri Jan 18 19:42:57 MST 2013)
which produced the same results. I waited a few days in case the snapshot
was too old and built from sources from yesterday, still giving
the same results. I don't need such a setup so it's not a big deal, but
here's output and dmesg in case it may be helpful:
root:skoeske> dd if=/dev/zero of=disk1 bs=1m count=100
100+0 records in
100+0 records out
104857600 bytes transferred in 2.875 secs (36462177 bytes/sec)
root:skoeske> r disk1=disk2
dd if=/dev/zero of=disk2 bs=1m count=100
100+0 records in
100+0 records out
104857600 bytes transferred in 3.219 secs (32567739 bytes/sec)
root:skoeske> r disk2=disk3
dd if=/dev/zero of=disk3 bs=1m count=100
100+0 records in
100+0 records out
104857600 bytes transferred in 3.569 secs (29378164 bytes/sec)
root:skoeske> vnconfig vnd0 disk1
root:skoeske> vnconfig vnd1 disk2
root:skoeske> vnconfig vnd2 disk3
root:skoeske> fdisk -iy vnd0
Warning CHS values out of bounds only saving LBA values
Writing MBR at offset 0.
root:skoeske> fdisk -iy vnd1
Warning CHS values out of bounds only saving LBA values
Writing MBR at offset 0.
root:skoeske> fdisk -iy vnd2
Warning CHS values out of bounds only saving LBA values
Writing MBR at offset 0.
root:skoeske> printf "a\n\n\n\nRAID\nw\nq\n\n" | disklabel -E vnd0
Label editor (enter '?' for help at any prompt)
> partition: [a] offset: [128] size: [204672] FS type: [4.2BSD] > > No label
> changes.
root:skoeske> printf "a\n\n\n\nRAID\nw\nq\n\n" | disklabel -E vnd1
Label editor (enter '?' for help at any prompt)
> partition: [a] offset: [128] size: [204672] FS type: [4.2BSD] > > No label
> changes.
root:skoeske> printf "a\n\n\n\nRAID\nw\nq\n\n" | disklabel -E vnd2
Label editor (enter '?' for help at any prompt)
> partition: [a] offset: [128] size: [204672] FS type: [4.2BSD] > > No label
> changes.
root:skoeske> bioctl -c 1 -l /dev/vnd0a,/dev/vnd1a,/dev/vnd2a softraid0
sd0 at scsibus1 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed
sd0: 99MB, 512 bytes/sector, 204144 sectors
softraid0: SR RAID 1 volume attached as sd0
panic: softraid0: sr_wu_init got active wu
Stopped at Debugger+0x4: popl %ebp
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
Debugger(d08fcddc,f2087de8,d08d0da4,f2087de8,d0a7e540) at Debugger+0x4
panic(d08d0da4,d0f8c014,f2087dfc,d036ccf3,d0fedab8) at panic+0x5d
sr_wu_init(d1055000,d0fedab8,f2087e3c,d1055a30,d1057f00) at sr_wu_init+0x73
sr_wu_put(d1055000,d0fedab8,f2087e3c,f2087e3c,d02030dd) at sr_wu_put+0x2f
scsi_io_put(d1055a30,d0fedab8,8000,d0fedab8,d0fedab8) at scsi_io_put+0x19
scsi_xs_put(f2027000,f2027000,f2087e8c,d041de18,d1055000) at scsi_xs_put+0x37
sr_raid1_intr(d1065000,f1fabdc4,f17dc000,200,52000) at sr_raid1_intr+0x107
vndstrategy(d1065000,0,0,50,d1065000) at vndstrategy+0x70
spec_strategy(f2087f48,0,f2087f6c,d03f2c28,d1053d90) at spec_strategy+0x3d
VOP_STRATEGY(d1065000,0,0,0,d0fedaf8) at VOP_STRATEGY+0x2c
sr_startwu_callback(d1055000,d0fedab8,d02008bf,d1053d80,d03f2c50) at sr_startwu
_callback+0x39
workq_thread(d1053d80) at workq_thread+0x36
Bad frame pointer: 0xd0bc8ed8
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
*23369 0 0 0 7 0x100200 srdis
19292 1571 6315 1000 3 0x80 ttyin less
1571 6315 6315 1000 3 0x88 pause sh
6315 30722 6315 1000 3 0x80 wait man
30722 11048 30722 1000 3 0x88 pause ksh
11048 2130 2130 1000 3 0x80 select sshd
2130 1703 2130 0 3 0x80 poll sshd
2513 1 2513 0 2 0x80 ksh
20983 1 20983 0 3 0x80 ttyin getty
22576 1 22576 0 3 0x80 ttyin getty
19748 1 19748 0 3 0x80 ttyin getty
21880 1 21880 0 3 0x80 ttyin getty
5243 1 5243 0 3 0x80 ttyin getty
32690 1 32690 0 3 0x80 select cron
24485 1 24485 99 3 0x80 poll sndiod
99 1 99 0 3 0x80 select inetd
22458 15830 15830 95 3 0x80 kqread smtpd
17649 15830 15830 95 3 0x80 kqread smtpd
17949 15830 15830 95 3 0x80 kqread smtpd
3934 15830 15830 95 3 0x80 kqread smtpd
445 15830 15830 95 3 0x80 kqread smtpd
7633 15830 15830 95 3 0x80 kqread smtpd
18333 15830 15830 95 3 0x80 kqread smtpd
19722 15830 15830 95 3 0x80 kqread smtpd
15830 1 15830 0 3 0x80 kqread smtpd
27266 1 27266 0 3 0x80 poll rwhod
1703 1 1703 0 3 0x80 select sshd
8005 0 0 0 3 0x100280 nfsidl nfsio
31584 0 0 0 3 0x100280 nfsidl nfsio
5415 0 0 0 3 0x100280 nfsidl nfsio
496 0 0 0 3 0x100280 nfsidl nfsio
25929 26220 26220 0 3 0x80 nfsd nfsd
11340 26220 26220 0 3 0x80 nfsd nfsd
29390 26220 26220 0 3 0x80 nfsd nfsd
20620 26220 26220 0 3 0x80 nfsd nfsd
26220 1 26220 0 3 0x80 netcon nfsd
18723 1 18723 0 3 0x80 select mountd
2592 1 2592 28 3 0x80 poll portmap
1389 10386 12843 83 3 0x80 poll ntpd
10386 12843 12843 83 3 0x80 poll ntpd
12843 1 12843 0 3 0x80 poll ntpd
22197 28196 28196 74 3 0x80 bpf pflogd
28196 1 28196 0 3 0x80 netio pflogd
3624 4526 4526 73 3 0 ffs_fsync syslogd
4526 1 4526 0 3 0x80 netio syslogd
14 0 0 0 3 0x100200 aiodoned aiodoned
13 0 0 0 3 0x100200 syncer update
12 0 0 0 3 0x100200 cleaner cleaner
11 0 0 0 3 0x100200 reaper reaper
10 0 0 0 3 0x100200 pgdaemon pagedaemon
9 0 0 0 3 0x100200 bored crypto
8 0 0 0 3 0x100200 pftm pfpurge
7 0 0 0 3 0x100200 usbtsk usbtask
6 0 0 0 3 0x100200 usbatsk usbatsk
5 0 0 0 3 0x100200 apmev apm0
4 0 0 0 2 0x100200 syswq
3 0 0 0 3 0x40100200 idle0
2 0 0 0 3 0x100200 kmalloc kmthread
1 0 1 0 3 0x80 wait init
0 -1 0 0 3 0x200 scheduler swapper
ddb> boot reboot
~Stopped at Debugger+0x4: popl %ebp
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> boot reboot
rebooting...
>> OpenBSD/i386 BOOT 3.21
OpenBSD 5.2-current (GENERIC) #10: Mon Jan 28 21:48:14 CET 2013
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(TM) CPU 1100MHz ("GenuineIntel" 686-class) 1.10 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE,PERF
real mem = 125370368 (119MB)
avail mem = 112365568 (107MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/18/02, BIOS32 rev. 0 @ 0xfb3b0, SMBIOS
rev. 2.2 @ 0xf0800 (43 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 09/18/2002
apm0 at bios0: Power Management spec V1.2 (slowidle)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdef4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde50/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:01:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SiS 630 PCI" rev 0x30
sisagp0 at pchb0
agp0 at sisagp0: aperture at 0xe8000000, size 0x4000000
pciide0 at pci0 dev 0 function 1 "SiS 5513 EIDE" rev 0xd0: 630S: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST380215A>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
pcib0 at pci0 dev 1 function 0 "SiS 85C503 System" rev 0x00
sis0 at pci0 dev 1 function 1 "SiS 900 10/100BaseTX" rev 0x84: irq 10, address
00:08:9b:82:06:7c
ukphy0 at sis0 phy 0: Generic IEEE 802.3u media interface, rev. 0: OUI
0x000760, model 0x0000
ohci0 at pci0 dev 1 function 2 "SiS 5597/5598 USB" rev 0x07: irq 5, version
1.0, legacy support
ohci1 at pci0 dev 1 function 3 "SiS 5597/5598 USB" rev 0x07: irq 5, version
1.0, legacy support
autri0 at pci0 dev 1 function 4 "SiS 7018 Audio" rev 0x02: irq 12
ac97: codec id 0x414c4710 (Avance Logic ALC200)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Realtek 3D
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
ppb0 at pci0 dev 2 function 0 "SiS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6300" rev 0x21
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:08:9b:6a:1f:94
rlphy0 at rl0 phy 0: RTL internal PHY
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8705F rev 2, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (ee00000000000001.a) swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
