Timo Schoeler wrote:
thus Reyk Floeter spake:
a sun guy said that the x2100 is based on the same platform as the U20
workstation. in contrast to the x4x00 "galaxy" servers
reyk
or is a dmesg from this machine available (had a short glimpse at the
archive, noone appeared)?
I don't know how similar the Ultra20 and X2100 are, but here's dmesg
output from an Ultra20:
OpenBSD 3.8 (RAMDISK_CD) #472: Sat Sep 10 16:09:03 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 1073278976 (1048124K)
avail mem = 909955072 (888628K)
using 22937 buffers containing 107536384 bytes (105016K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Opteron(tm) Processor 148, 1005.28 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
"Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
"Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured
"Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "Nvidia nForce4 USB" rev 0xa2: irq 10,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0 at pci0 dev 2 function 1 "Nvidia nForce4 USB" rev 0xa3: irq 11
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: Nvidia EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
"Nvidia nForce4 AC97" rev 0xa2 at pci0 dev 4 function 0 not configured
pciide0 at pci0 dev 6 function 0 "Nvidia nForce4 IDE" rev 0xf2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, DVD SOHD-16P9S, F3S2> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 7 function 0 "Nvidia nForce4 SATA 1" rev 0xf3: DMA
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST380013AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 8 function 0 "Nvidia nForce4 SATA 2" rev 0xf3: DMA
pciide2: using irq 10 for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "Nvidia nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
"VIA VT6306 FireWire" rev 0x80 at pci1 dev 6 function 0 not configured
skc0 at pci1 dev 9 function 0 "Marvell SKv2" rev 0x12: irq 5
skc0: Marvell Yukon (0x1)
sk0 at skc0 port A: address 00:04:e2:d7:33:05
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
"Nvidia CK804 LAN" rev 0xa3 at pci0 dev 10 function 0 not configured
ppb1 at pci0 dev 11 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
vga1 at pci5 dev 0 function 0 "Nvidia Quadro FX 330" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
rd0: fixed, 3584 blocks
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: vendor 0x0430 product 0x0005, rev 1.10/2.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 6 configuration 1 interface 0
uhidev1: vendor 0x0430 product 0x0100, rev 2.00/1.07, addr 3, iclass 3/1
uhid at uhidev1 not configured
umass0 at uhub1 port 4 configuration 1 interface 0
umass0: vendor 0x0457 USB Mass Storage Device, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <JetFlash, TS1GJF110, 0.00> SCSI2 0/direct
removable
sd0: 1000MB, 1000 cyl, 64 head, 32 sec, 512 bytes/sec, 2048000 sec total
