He is using OpenBSD as a guest in Xen, not as a host.

// Johan Ryberg
On May 6, 2012 3:14 PM, "Tomas Bodzar" <[email protected]> wrote:

> On Sat, May 5, 2012 at 7:44 PM, Martijn Rijkeboer <[email protected]>
> wrote:
> > Hi,
> >
> > When booting GENERIC.MP on Xen I get the following page fault trap:
> >
> > B root on wd0a (6412ffe6504713d5.a) swap on wd0b dump on wd0b
> > B clock: unknown CMOS layout
> > B kernel: page fault trap, code = 0
> > B Stopped at B  B trap+0x6a: B  B movq B  B %r13,0x1f0(%r14)
> > B ddb{1}>
> >
> > When booting GENERIC all works fine. Below are the specs, sysctl hw,
> trace,
> > ps and dmesg. Any suggestions?
>
> Like http://marc.info/?l=openbsd-misc&m=133612760603867&w=2 ?
>
> >
> >
> > # OS
> >
> > OpenBSD 5.1-RELEASE, AMD64
> >
> >
> > # Xen
> >
> > XenServer 5.6 Service Pack 2, Build 47101p
> >
> >
> > # sysctl hw
> >
> > hw.machine=amd64
> > hw.model=Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz
> > hw.ncpu=1
> > hw.byteorder=1234
> > hw.pagesize=4096
> > hw.disknames=wd0:6412ffe6504713d5,cd0:,fd0:,fd1:
> > hw.diskcount=4
> > hw.cpuspeed=2133
> > hw.vendor=Xen
> > hw.product=HVM domU
> > hw.version=3.4.2
> > hw.serialno=6d00c118-f807-8694-d16c-cd186dcb9538
> > hw.uuid=6d00c118-f807-8694-d16c-cd186dcb9538
> > hw.physmem=1068498944
> > hw.usermem=1068486656
> > hw.ncpufound=2
> > hw.allowpowerdown=1
> >
> >
> > # trace
> >
> > ddb{1}> trace
> > trap() at trap+0x6a
> > --- trap (number 13) ---
> > mpidle() at 0
> > cpu_spinup_trampoline_end() at cpu_spinup_trampoline_end+0x67
> > end trace frame: 0x0, count: -3
> >
> >
> > # ps
> >
> > ddb{1}> ps
> > B  PID B  PPID B  PGRP B  B UID B S B  B  B  FLAGS B WAIT B  B  B
> B COMMAND
> > B  B 13 B  B  B 0 B  B  B 0 B  B  B 0 B 3 B  B 0x100200 B aiodoned B
> B aiodoned
> > B  B 12 B  B  B 0 B  B  B 0 B  B  B 0 B 3 B  B 0x100200 B syncer B  B
> B update
> > B  B 11 B  B  B 0 B  B  B 0 B  B  B 0 B 3 B  B 0x100200 B cleaner B  B
> cleaner
> > B  B 10 B  B  B 0 B  B  B 0 B  B  B 0 B 3 B  B 0x100200 B reaper B  B
> B reaper
> > B  B  9 B  B  B 0 B  B  B 0 B  B  B 0 B 3 B  B 0x100200 B pgdaemon B
> B pagedaemon
> > B  B  8 B  B  B 0 B  B  B 0 B  B  B 0 B 3 B  B 0x100200 B bored B  B  B
> crypto
> > B  B  7 B  B  B 0 B  B  B 0 B  B  B 0 B 3 B  B 0x100200 B pftm B  B  B
> B pfpruge
> > B  B  6 B  B  B 0 B  B  B 0 B  B  B 0 B 3 B  B 0x100200 B usbtsk B  B
> B usbtask
> > B  B  5 B  B  B 0 B  B  B 0 B  B  B 0 B 3 B  B 0x100200 B usbatsk B  B
> usbatsk
> > B  B  4 B  B  B 0 B  B  B 0 B  B  B 0 B 3 B 0x40100200 B  B  B  B  B  B
> B idle1
> > B  B  3 B  B  B 0 B  B  B 0 B  B  B 0 B 3 B  B 0x100200 B bored B  B  B
> syswq
> > B  B  2 B  B  B 0 B  B  B 0 B  B  B 0 B 7 B 0x40100200 B  B  B  B  B  B
> B idle0
> > B  B  1 B  B  B 0 B  B  B 0 B  B  B 0 B 3 B  B  B  B  B  0 B biowait B  B
> swapper
> > B  B  0 B  B  -1 B  B  B 0 B  B  B 0 B 3 B  B  B  0x200 B scheduler B
> swapper
> >
> >
> > # dmesg (GENERIC)
> >
> > OpenBSD 5.1 (GENERIC) #181: Sun Feb 12 09:35:53 MST 2012
> > B  B [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
> > real mem = 1068498944 (1019MB)
> > avail mem = 1025982464 (978MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xeb01f (12 entries)
> > bios0: vendor Xen version "3.4.2" date 03/25/2011
> > bios0: Xen HVM domU
> > acpi0 at bios0: rev 2, ACPI control unavailable
> > mpbios0 at bios0: Intel MP Specification 1.4
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz, 2133.68 MHz
> > cpu0:
> >
>
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,MMX,
> FXSR,SSE,SSE2,SSE3,SSSE3,CX16,LONG,LAHF
> > cpu0: 4MB 64b/line 16-way L2 cache
> > cpu0: apic clock running at 100MHz
> > cpu at mainbus0: not configured
> > mpbios0: bus 0 is type ISA
> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 48 pins
> > ioapic0: misconfigured as apic 0, remapped to apid 1
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
> > pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
> > pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
> > channel 0 wired to compatibility, channel 1 wired to compatibility
> > wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
> > wd0: 16-sector PIO, LBA48, 40960MB, 83886080 sectors
> > wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
> > atapiscsi0 at pciide0 channel 1 drive 1
> > scsibus0 at atapiscsi0: 2 targets
> > cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.10> ATAPI 5/cdrom
> > removable
> > cd0(pciide0:1:1): using PIO mode 0
> > uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 1 int 5
> > piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x01: SMBus
> > disabled
> > vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > "XenSource Platform Device" rev 0x01 at pci0 dev 3 function 0 not
> configured
> > em0 at pci0 dev 4 function 0 "Intel PRO/1000MT (82540EM)" rev 0x03: apic
> 1
> > int 5, address 00:11:11:f8:51:c3
> > isa0 at pcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > com0: probed fifo depth: 0 bytes
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pms0 mux 0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: density unknown
> > fd1 at fdc0 drive 1: density unknown
> > usb0 at uhci0: USB revision 1.0
> > uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > nvram: invalid checksum
> > mtrr: Pentium Pro MTRR support
> > uhidev0 at uhub0 port 2 configuration 1 interface 0 "QEMU 0.10.2 QEMU USB
> > Tablet" rev 1.00/0.00 addr 2
> > uhidev0: iclass 3/1
> > uhid0 at uhidev0: input=6, output=0, feature=0
> > vscsi0 at root
> > scsibus1 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus2 at softraid0: 256 targets
> > root on wd0a (6412ffe6504713d5.a) swap on wd0b dump on wd0b
> > clock: unknown CMOS layout
> >
> >
> > Kind regards,
> >
> >
> > Martijn Rijkeboer

Reply via email to