Hello, I wonder if anyone can help me out with the following. Any or all help, including 'this has nothing to do with OBSD', or options to try passing to the dump, happily received. In particular, I wonder if my situation is analogous with the facts of the case here: http://old.nabble.com/Restore-from-SCSI-tape-on-recent-i386-snapshot-td288246 13.html
although unlike the OP in this case I have *not* had it working right beforehand as this is a new machine. This is with snapshot 5.1 GENERIC.MP#253 i386 and the two previous snapshots on my local mirror. Dmesg and /var/run/dmesg.boot below. Machine is an HP 350ML G6 using 3-disk hardware RAID 5 with a Quantum Ultrium LTO 5 external drive. mt status: # mt status SCSI tape drive, residual=0 ds=3<Mounted> er=0 blocksize: 0 (0) density: 0 (0) I (perhaps naively?) adapted the dump script at http://www.openbsd.org/faq/faq14.html#Backup and when the script is run, output appears promising: # /usr/local/bin/backup Starting Full Backup ... DUMP: Date of this level 0 dump: Wed May 2 12:09:37 2012 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping /dev/rsd0a to /dev/nrst0 DUMP: mapping (Pass I) [regular files] DUMP: mapping (Pass II) [directories] DUMP: estimated 762797 tape blocks. DUMP: Volume 1 started at: Wed May 2 12:09:42 2012 DUMP: dumping (Pass III) [directories] DUMP: dumping (Pass IV) [regular files] DUMP: 779165 tape blocks on 1 volume DUMP: Date of this level 0 dump: Wed May 2 12:09:37 2012 DUMP: Volume 1 completed at: Wed May 2 12:09:55 2012 DUMP: Volume 1 took 0:00:13 DUMP: Volume 1 transfer rate: 59935 KB/s DUMP: Date this dump completed: Wed May 2 12:09:55 2012 DUMP: Average transfer rate: 59935 KB/s DUMP: level 0 dump on Wed May 2 12:09:37 2012 DUMP: Closing /dev/nrst0 DUMP: DUMP IS DONE And so on for the other mounts on the array. The amount of time this takes appears realistic, but since I can't successfully test the dump, I don't know if it is 'really' doing a backup. Attempting to test the dump: # /sbin/restore -tvs 1 -f /dev/rst0 Verify tape and initialize maps restore: tape read error: Input/output error For interest, I tried using tar to backup the root partition. Again, this seemed to work fine from the write side, but on attempting to read I again got an Input/output error. Thanks for any thoughts! Dmesg: OpenBSD 5.1-current (GENERIC.MP) #253: Thu Apr 26 01:45:24 MDT 2012 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF real mem = 3881492480 (3701MB) avail mem = 3807248384 (3630MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.7 @ 0xe77fe000 (134 entries) bios0: vendor HP version "D22" date 05/05/2011 bios0: HP ProLiant ML350 G6 acpi0 at bios0: rev 2 acpi0: sleep states S0 S4 S5 acpi0: tables DSDT FACP SPCR MCFG HPET FFFF SPMI ERST APIC SRAT FFFF BERT HEST DMAR SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe8000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 20 (application processor) cpu1: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF cpu3 at mainbus0: apid 18 (application processor) cpu3: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins ioapic1 at mainbus0: apid 0 pa 0xfec80000, version 20, 24 pins acpiprt0 at acpi0: bus 1 (IP2P) acpiprt1 at acpi0: bus 3 (NIB1) acpiprt2 at acpi0: bus 4 (PT01) acpiprt3 at acpi0: bus 5 (PT03) acpiprt4 at acpi0: bus 8 (PT04) acpiprt5 at acpi0: bus 11 (PT05) acpiprt6 at acpi0: bus 14 (PT07) acpiprt7 at acpi0: bus 17 (PT09) acpiprt8 at acpi0: bus 20 (PT0A) acpiprt9 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C3, C3, C1 acpicpu1 at acpi0: C3, C3, C1 acpicpu2 at acpi0: C3, C3, C1 acpicpu3 at acpi0: C3, C3, C1 acpitz0 at acpi0: critical temperature is 31 degC bios0: ROM list: 0xc0000/0xb000 0xcb000/0x3600! 0xce600/0x1a00 0xd0000/0x4000 0xd4000/0x800 ipmi at mainbus0 not configured pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x13 ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13 pci1 at ppb0 bus 4 ciss0 at pci1 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01: apic 0 int 4 ciss0: 1 LD, HW rev 2, FW 5.14/5.14, 64bit fifo rro scsibus0 at ciss0: 1 targets sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 5.14> SCSI3 0/direct fixed sd0: 953816MB, 512 bytes/sector, 1953415216 sectors ppb1 at pci0 dev 2 function 0 "Intel X58 PCIE" rev 0x13 pci2 at ppb1 bus 23 ppb2 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13 pci3 at ppb2 bus 5 mpii0 at pci3 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi scsibus1 at mpii0: 258 targets st0 at scsibus1 targ 5 lun 0: <QUANTUM, ULTRIUM 5, 3180> SCSI4 1/sequential removable naa.00e09e60001d700e ppb3 at pci0 dev 4 function 0 "Intel X58 PCIE" rev 0x13 pci4 at ppb3 bus 8 ppb4 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13 pci5 at ppb4 bus 11 ppb5 at pci0 dev 6 function 0 "Intel X58 PCIE" rev 0x13 pci6 at ppb5 bus 24 ppb6 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13 pci7 at ppb6 bus 14 ppb7 at pci0 dev 8 function 0 "Intel X58 PCIE" rev 0x13 pci8 at ppb7 bus 25 ppb8 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13 pci9 at ppb8 bus 17 ppb9 at pci0 dev 10 function 0 "Intel X58 PCIE" rev 0x13 pci10 at ppb9 bus 20 pchb1 at pci0 dev 13 function 0 vendor "Intel", unknown product 0x343a rev 0x13 pchb2 at pci0 dev 13 function 1 vendor "Intel", unknown product 0x343b rev 0x13 pchb3 at pci0 dev 13 function 2 vendor "Intel", unknown product 0x343c rev 0x13 pchb4 at pci0 dev 13 function 3 vendor "Intel", unknown product 0x343d rev 0x13 pchb5 at pci0 dev 13 function 4 "Intel 5520/X58 QuickPath" rev 0x13 pchb6 at pci0 dev 13 function 5 "Intel 5520 QuickPath" rev 0x13 pchb7 at pci0 dev 13 function 6 vendor "Intel", unknown product 0x341a rev 0x13 pchb8 at pci0 dev 14 function 0 vendor "Intel", unknown product 0x341c rev 0x13 pchb9 at pci0 dev 14 function 1 vendor "Intel", unknown product 0x341d rev 0x13 pchb10 at pci0 dev 14 function 2 vendor "Intel", unknown product 0x341e rev 0x13 pchb11 at pci0 dev 14 function 3 vendor "Intel", unknown product 0x341f rev 0x13 pchb12 at pci0 dev 14 function 4 vendor "Intel", unknown product 0x3439 rev 0x13 "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured "Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured "Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured ppb10 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00 pci11 at ppb10 bus 2 ppb11 at pci11 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 pci12 at ppb11 bus 3 bge0 at pci12 dev 4 function 0 "Broadcom BCM5715" rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 16, address e8:39:35:b6:f3:7e brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 bge1 at pci12 dev 4 function 1 "Broadcom BCM5715" rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 17, address e8:39:35:b6:f3:7f brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 uhci0 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 8 int 20 uhci1 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 8 int 23 uhci2 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 8 int 22 uhci3 at pci0 dev 29 function 3 "Intel 82801JI USB" rev 0x00: apic 8 int 23 ehci0 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 20 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb12 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 pci13 at ppb12 bus 1 vga1 at pci13 dev 3 function 0 "ATI ES1000" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 8 int 23 drm0 at radeondrm0 "Compaq iLO" rev 0x03 at pci13 dev 4 function 0 not configured "Compaq iLO" rev 0x03 at pci13 dev 4 function 2 not configured uhci4 at pci13 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 8 int 22 "Hewlett-Packard IPMI" rev 0x00 at pci13 dev 4 function 6 not configured usb1 at uhci4: USB revision 1.0 uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev 1.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00 pciide0 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using apic 8 int 17 for native-PCI interrupt atapiscsi0 at pciide0 channel 1 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: <hp, DVD-RAM GH80N, RS00> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo com1: probed fifo depth: 0 bytes pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhidev0 at uhub1 port 1 configuration 1 interface 0 "HP Virtual Keyboard" rev 1.10/0.02 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub1 port 1 configuration 1 interface 1 "HP Virtual Keyboard" rev 1.10/0.02 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse1 at ums0 mux 0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (bb6e325a3437c0e5.a) swap on sd0b dump on sd0b /var/run/dmesg.boot: OpenBSD 5.1-current (GENERIC.MP) #253: Thu Apr 26 01:45:24 MDT 2012 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF real mem = 3881492480 (3701MB) avail mem = 3807248384 (3630MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.7 @ 0xe77fe000 (134 entries) bios0: vendor HP version "D22" date 05/05/2011 bios0: HP ProLiant ML350 G6 acpi0 at bios0: rev 2 acpi0: sleep states S0 S4 S5 acpi0: tables DSDT FACP SPCR MCFG HPET FFFF SPMI ERST APIC SRAT FFFF BERT HEST DMAR SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe8000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 20 (application processor) cpu1: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF cpu3 at mainbus0: apid 18 (application processor) cpu3: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins ioapic1 at mainbus0: apid 0 pa 0xfec80000, version 20, 24 pins acpiprt0 at acpi0: bus 1 (IP2P) acpiprt1 at acpi0: bus 3 (NIB1) acpiprt2 at acpi0: bus 4 (PT01) acpiprt3 at acpi0: bus 5 (PT03) acpiprt4 at acpi0: bus 8 (PT04) acpiprt5 at acpi0: bus 11 (PT05) acpiprt6 at acpi0: bus 14 (PT07) acpiprt7 at acpi0: bus 17 (PT09) acpiprt8 at acpi0: bus 20 (PT0A) acpiprt9 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C3, C3, C1 acpicpu1 at acpi0: C3, C3, C1 acpicpu2 at acpi0: C3, C3, C1 acpicpu3 at acpi0: C3, C3, C1 acpitz0 at acpi0: critical temperature is 31 degC bios0: ROM list: 0xc0000/0xb000 0xcb000/0x3600! 0xce600/0x1a00 0xd0000/0x4000 0xd4000/0x800 ipmi at mainbus0 not configured pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x13 ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13 pci1 at ppb0 bus 4 ciss0 at pci1 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01: apic 0 int 4 ciss0: 1 LD, HW rev 2, FW 5.14/5.14, 64bit fifo rro scsibus0 at ciss0: 1 targets sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 5.14> SCSI3 0/direct fixed sd0: 953816MB, 512 bytes/sector, 1953415216 sectors ppb1 at pci0 dev 2 function 0 "Intel X58 PCIE" rev 0x13 pci2 at ppb1 bus 23 ppb2 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13 pci3 at ppb2 bus 5 mpii0 at pci3 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi scsibus1 at mpii0: 258 targets st0 at scsibus1 targ 5 lun 0: <QUANTUM, ULTRIUM 5, 3180> SCSI4 1/sequential removable naa.00e09e60001d700e ppb3 at pci0 dev 4 function 0 "Intel X58 PCIE" rev 0x13 pci4 at ppb3 bus 8 ppb4 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13 pci5 at ppb4 bus 11 ppb5 at pci0 dev 6 function 0 "Intel X58 PCIE" rev 0x13 pci6 at ppb5 bus 24 ppb6 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13 pci7 at ppb6 bus 14 ppb7 at pci0 dev 8 function 0 "Intel X58 PCIE" rev 0x13 pci8 at ppb7 bus 25 ppb8 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13 pci9 at ppb8 bus 17 ppb9 at pci0 dev 10 function 0 "Intel X58 PCIE" rev 0x13 pci10 at ppb9 bus 20 pchb1 at pci0 dev 13 function 0 vendor "Intel", unknown product 0x343a rev 0x13 pchb2 at pci0 dev 13 function 1 vendor "Intel", unknown product 0x343b rev 0x13 pchb3 at pci0 dev 13 function 2 vendor "Intel", unknown product 0x343c rev 0x13 pchb4 at pci0 dev 13 function 3 vendor "Intel", unknown product 0x343d rev 0x13 pchb5 at pci0 dev 13 function 4 "Intel 5520/X58 QuickPath" rev 0x13 pchb6 at pci0 dev 13 function 5 "Intel 5520 QuickPath" rev 0x13 pchb7 at pci0 dev 13 function 6 vendor "Intel", unknown product 0x341a rev 0x13 pchb8 at pci0 dev 14 function 0 vendor "Intel", unknown product 0x341c rev 0x13 pchb9 at pci0 dev 14 function 1 vendor "Intel", unknown product 0x341d rev 0x13 pchb10 at pci0 dev 14 function 2 vendor "Intel", unknown product 0x341e rev 0x13 pchb11 at pci0 dev 14 function 3 vendor "Intel", unknown product 0x341f rev 0x13 pchb12 at pci0 dev 14 function 4 vendor "Intel", unknown product 0x3439 rev 0x13 "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured "Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured "Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured ppb10 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00 pci11 at ppb10 bus 2 ppb11 at pci11 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 pci12 at ppb11 bus 3 bge0 at pci12 dev 4 function 0 "Broadcom BCM5715" rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 16, address e8:39:35:b6:f3:7e brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 bge1 at pci12 dev 4 function 1 "Broadcom BCM5715" rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 17, address e8:39:35:b6:f3:7f brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 uhci0 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 8 int 20 uhci1 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 8 int 23 uhci2 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 8 int 22 uhci3 at pci0 dev 29 function 3 "Intel 82801JI USB" rev 0x00: apic 8 int 23 ehci0 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 20 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb12 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 pci13 at ppb12 bus 1 vga1 at pci13 dev 3 function 0 "ATI ES1000" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 8 int 23 drm0 at radeondrm0 "Compaq iLO" rev 0x03 at pci13 dev 4 function 0 not configured "Compaq iLO" rev 0x03 at pci13 dev 4 function 2 not configured uhci4 at pci13 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 8 int 22 "Hewlett-Packard IPMI" rev 0x00 at pci13 dev 4 function 6 not configured usb1 at uhci4: USB revision 1.0 uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev 1.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00 pciide0 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using apic 8 int 17 for native-PCI interrupt atapiscsi0 at pciide0 channel 1 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: <hp, DVD-RAM GH80N, RS00> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo com1: probed fifo depth: 0 bytes pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhidev0 at uhub1 port 1 configuration 1 interface 0 "HP Virtual Keyboard" rev 1.10/0.02 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub1 port 1 configuration 1 interface 1 "HP Virtual Keyboard" rev 1.10/0.02 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse1 at ums0 mux 0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (bb6e325a3437c0e5.a) swap on sd0b dump on sd0b
