Set -Y _and_ -y on both machines.
On 2012-01-20, Michael Burk <[email protected]> wrote:
> Hello,
>
> I am trying to set up DHCP synchronization between two OpenBSD 5.0 servers,
> but am getting errors when trying to start the target DHCPD server.
>
> The source server is called Bromine, and the target is Selenium. I start
> DHCPD on each server as follows:
> Bromine:
> /usr/sbin/dhcpd -Y 10.30.217.34
> Selenium:
> /usr/sbin/dhcpd -y 10.30.217.35
>
> DHCPD starts normally on Bromine, and I see log messages like this:
> Jan 20 10:19:55 bromine dhcpd[18765]: sending DHCP_SYNC_LEASE for hw
> 98:4b:e1:01:c5:e6 -> ip 10.30.216.96, start 0, end 0
>
> But when I try to start it on Selenium I get this error:
> dhcpd: sync init: Can't assign requested address
>
> When I try to start it using the host name instead, I get this:
> dhcpd: sync init: Device not configured
>
> Additional details:
> - I have the file /var/db/dhcpd.key on each server:
> -rw-r--r-- 1 root wheel 2048 Nov 18 17:55 /var/db/dhcpd.key
> - The MD5 sums on dhcpd.key and dhcpd.conf match on both servers.
> - Disabling pf on both servers had no effect
> - I found no errors on Selenium in /var/log/{daemon,messages}
>
> I've not been able to find any information on these errors.
>
> Thanks for any help!
> -- Michael
>
>
> Selenium's dmesg:
>
> OpenBSD 5.0 (GENERIC) #53: Wed Aug 17 10:07:52 MDT 2011
> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
> real mem = 535756800 (510MB)
> avail mem = 507461632 (483MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (98 entries)
> bios0: vendor Phoenix Technologies LTD version "6.00" date 10/13/2009
> bios0: VMware, Inc. VMware Virtual Platform
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S1 S4 S5
> acpi0: tables DSDT FACP BOOT APIC MCFG SRAT
> acpi0: wakeup devices PCI0(S3) USB_(S1) P2P0(S3) S1F0(S3) S2F0(S3) S3F0(S3)
> S4F0(S3) S5F0(S3) S6F0(S3) S7F0(S3) S8F0(S3) S9F0(S3) Z00P(S3) Z00Q(S3)
> Z00R(S3) Z00S(S3) Z00T(S3) Z00U(S3) Z00V(S3) Z00W(S3) Z00X(S3) Z00Y(S3)
> Z00Z(S3) Z010(S3) Z011(S3) Z012(S3) Z013(S3) Z014(S3) Z015(S3) Z016(S3)
> Z017(S3) Z018(S3) Z019(S3) Z01A(S3) Z01B(S3) P2P1(S3) S1F0(S3) S2F0(S3)
> S3F0(S3) S4F0(S3) S5F0(S3) S6F0(S3) S7F0(S3) S8F0(S3) S9F0(S3) Z00P(S3)
> Z00Q(S3) Z00R(S3) Z00S(S3) Z00T(S3) Z00U(S3) Z00V(S3) Z00W(S3) Z00X(S3)
> Z00Y(S3) Z00Z(S3) Z010(S3) Z011(S3) Z012(S3) Z013(S3) Z014(S3) Z015(S3)
> Z016(S3) Z017(S3) Z018(S3) Z019(S3) Z01A(S3) Z01B(S3) P2P2(S3) S1F0(S3)
> S2F0(S3) S3F0(S3) S4F0(S3) S5F0(S3) S6F0(S3) S7F0(S3) S8F0(S3) S9F0(S3)
> Z00P(S3) Z00Q(S3) Z00R(S3) Z00S(S3) Z00T(S3) Z00U(S3) Z00V(S3) Z00W(S3)
> Z00X(S3) Z00Y(S3) Z00Z(S3) Z010(S3) Z011(S3) Z012(S3) Z013(S3) Z014(S3)
> Z015(S3) Z016(S3) Z017(S3) Z018(S3) Z019(S3) Z01A(S3) Z01B(S3) P2P3(S3)
> S1F0(S3) S2F0(S3) S3F0(S3) S4F0(S3) S5F0(S3) S6F0(S3) S7F0(S3) S8F0(S3)
> S9F0(S3) Z00P(S3) Z00Q(S3) Z00R(S3) Z00S(S3) Z00T(S3) Z00U(S3) Z00V(S3)
> Z00W(S3) Z00X(S3) Z00Y(S3) Z00Z(S3) Z010(S3) Z011(S3) Z012(S3) Z013(S3)
> Z014(S3) Z015(S3) Z016(S3) Z017(S3) Z018(S3) Z019(S3) Z01A(S3) Z01B(S3)
> PE40(S3) S1F0(S3) PE50(S3) S1F0(S3) PE60(S3) S1F0(S3) PE70(S3) S1F0(S3)
> PE80(S3) S1F0(S3) PE90(S3) S1F0(S3) PEA0(S3) S1F0(S3) PEB0(S3) S1F0(S3)
> PEC0(S3) S1F0(S3) PED0(S3) S1F0(S3) PEE0(S3) S1F0(S3) PE41(S3) S1F0(S3)
> PE42(S3) S1F0(S3) PE43(S3) S1F0(S3) PE44(S3) S1F0(S3) PE45(S3) S1F0(S3)
> PE46(S3) S1F0(S3) PE47(S3) S1F0(S3) PE51(S3) S1F0(S3) PE52(S3) S1F0(S3)
> PE53(S3) S1F0(S3) PE54(S3) S1F0(S3) PE55(S3) S1F0(S3) PE56(S3) S1F0(S3)
> PE57(S3) S1F0(S3) PE61(S3) S1F0(S3) PE62(S3) S1F0(S3) PE63(S3) S1F0(S3)
> PE64(S3) S1F0(S3) PE65(S3) S1F0(S3) PE66(S3) S1F0(S3) PE67(S3) S1F0(S3)
> PE71(S3) S1F0(S3) PE72(S3) S1F0(S3) PE73(S3) S1F0(S3) PE74(S3) S1F0(S3)
> PE75(S3) S1F0(S3) PE76(S3) S1F0(S3) PE77(S3) S1F0(S3) PE81(S3) S1F0(S3)
> PE82(S3) S1F0(S3) PE83(S3) S1F0(S3) PE84(S3) S1F0(S3) PE85(S3) S1F0(S3)
> PE86(S3) S1F0(S3) PE87(S3) S1F0(S3) PE91(S3) S1F0(S3) PE92(S3) S1F0(S3)
> PE93(S3) S1F0(S3) PE94(S3) S1F0(S3) PE95(S3) S1F0(S3) PE96(S3) S1F0(S3)
> PE97(S3) S1F0(S3) PEA1(S3) S1F0(S3) PEA2(S3) S1F0(S3) PEA3(S3) S1F0(S3)
> PEA4(S3) S1F0(S3) PEA5(S3) S1F0(S3) PEA6(S3) S1F0(S3) PEA7(S3) S1F0(S3)
> PEB1(S3) S1F0(S3) PEB2(S3) S1F0(S3) PEB3(S3) S1F0(S3) PEB4(S3) S1F0(S3)
> PEB5(S3) S1F0(S3) PEB6(S3) S1F0(S3) PEB7(S3) S1F0(S3) SLPB(S4) LID_(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD Opteron(tm) Processor 6174, 2199.57 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> 64b/line 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully
> associative
> cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully
> associative
> cpu0: apic clock running at 65MHz
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0
> acpibat0 at acpi0: BAT1 not present
> acpibat1 at acpi0: BAT2 not present
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: SLPB
> acpibtn1 at acpi0: LID_
> vmt0 at mainbus0
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x01
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x01
> pci1 at ppb0 bus 1
> pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> pciide0: channel 0 disabled (no drives)
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <NECVMWar, VMware IDE CDR10, 1.00> ATAPI
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x08: SMBus
> disabled
> "VMware Virtual Machine Communication Interface" rev 0x10 at pci0 dev 7
> function 7 not configured
> vga1 at pci0 dev 15 function 0 "VMware Virtual SVGA II" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> mpi0 at pci0 dev 16 function 0 "Symbios Logic 53c1030" rev 0x01: apic 1 int
> 17
> scsibus1 at mpi0: 16 targets, initiator 7
> sd0 at scsibus1 targ 0 lun 0: <VMware, Virtual disk, 1.0> SCSI2 0/direct
> fixed
> sd0: 8192MB, 512 bytes/sector, 16777216 sectors
> mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
> ppb1 at pci0 dev 17 function 0 "VMware Virtual PCI-PCI" rev 0x02
> pci2 at ppb1 bus 2
> em0 at pci2 dev 0 function 0 "Intel PRO/1000MT (82545EM)" rev 0x01: apic 1
> int 18, address 00:50:56:81:00:52
> ppb2 at pci0 dev 21 function 0 "VMware Virtual PCIE-PCIE" rev 0x01
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 21 function 1 "VMware Virtual PCIE-PCIE" rev 0x01
> pci4 at ppb3 bus 4
> ppb4 at pci0 dev 21 function 2 "VMware Virtual PCIE-PCIE" rev 0x01
> pci5 at ppb4 bus 5
> ppb5 at pci0 dev 21 function 3 "VMware Virtual PCIE-PCIE" rev 0x01
> pci6 at ppb5 bus 6
> ppb6 at pci0 dev 21 function 4 "VMware Virtual PCIE-PCIE" rev 0x01
> pci7 at ppb6 bus 7
> ppb7 at pci0 dev 21 function 5 "VMware Virtual PCIE-PCIE" rev 0x01
> pci8 at ppb7 bus 8
> ppb8 at pci0 dev 21 function 6 "VMware Virtual PCIE-PCIE" rev 0x01
> pci9 at ppb8 bus 9
> ppb9 at pci0 dev 21 function 7 "VMware Virtual PCIE-PCIE" rev 0x01
> pci10 at ppb9 bus 10
> ppb10 at pci0 dev 22 function 0 "VMware Virtual PCIE-PCIE" rev 0x01
> pci11 at ppb10 bus 11
> ppb11 at pci0 dev 22 function 1 "VMware Virtual PCIE-PCIE" rev 0x01
> pci12 at ppb11 bus 12
> ppb12 at pci0 dev 22 function 2 "VMware Virtual PCIE-PCIE" rev 0x01
> pci13 at ppb12 bus 13
> ppb13 at pci0 dev 22 function 3 "VMware Virtual PCIE-PCIE" rev 0x01
> pci14 at ppb13 bus 14
> ppb14 at pci0 dev 22 function 4 "VMware Virtual PCIE-PCIE" rev 0x01
> pci15 at ppb14 bus 15
> ppb15 at pci0 dev 22 function 5 "VMware Virtual PCIE-PCIE" rev 0x01
> pci16 at ppb15 bus 16
> ppb16 at pci0 dev 22 function 6 "VMware Virtual PCIE-PCIE" rev 0x01
> pci17 at ppb16 bus 17
> ppb17 at pci0 dev 22 function 7 "VMware Virtual PCIE-PCIE" rev 0x01
> pci18 at ppb17 bus 18
> ppb18 at pci0 dev 23 function 0 "VMware Virtual PCIE-PCIE" rev 0x01
> pci19 at ppb18 bus 19
> ppb19 at pci0 dev 23 function 1 "VMware Virtual PCIE-PCIE" rev 0x01
> pci20 at ppb19 bus 20
> ppb20 at pci0 dev 23 function 2 "VMware Virtual PCIE-PCIE" rev 0x01
> pci21 at ppb20 bus 21
> ppb21 at pci0 dev 23 function 3 "VMware Virtual PCIE-PCIE" rev 0x01
> pci22 at ppb21 bus 22
> ppb22 at pci0 dev 23 function 4 "VMware Virtual PCIE-PCIE" rev 0x01
> pci23 at ppb22 bus 23
> ppb23 at pci0 dev 23 function 5 "VMware Virtual PCIE-PCIE" rev 0x01
> pci24 at ppb23 bus 24
> ppb24 at pci0 dev 23 function 6 "VMware Virtual PCIE-PCIE" rev 0x01
> pci25 at ppb24 bus 25
> ppb25 at pci0 dev 23 function 7 "VMware Virtual PCIE-PCIE" rev 0x01
> pci26 at ppb25 bus 26
> ppb26 at pci0 dev 24 function 0 "VMware Virtual PCIE-PCIE" rev 0x01
> pci27 at ppb26 bus 27
> ppb27 at pci0 dev 24 function 1 "VMware Virtual PCIE-PCIE" rev 0x01
> pci28 at ppb27 bus 28
> ppb28 at pci0 dev 24 function 2 "VMware Virtual PCIE-PCIE" rev 0x01
> pci29 at ppb28 bus 29
> ppb29 at pci0 dev 24 function 3 "VMware Virtual PCIE-PCIE" rev 0x01
> pci30 at ppb29 bus 30
> ppb30 at pci0 dev 24 function 4 "VMware Virtual PCIE-PCIE" rev 0x01
> pci31 at ppb30 bus 31
> ppb31 at pci0 dev 24 function 5 "VMware Virtual PCIE-PCIE" rev 0x01
> pci32 at ppb31 bus 32
> ppb32 at pci0 dev 24 function 6 "VMware Virtual PCIE-PCIE" rev 0x01
> pci33 at ppb32 bus 33
> ppb33 at pci0 dev 24 function 7 "VMware Virtual PCIE-PCIE" rev 0x01
> pci34 at ppb33 bus 34
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> mtrr: Pentium Pro MTRR support
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (b31bf69d51b4a1ab.a) swap on sd0b dump on sd0b
> cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
> SENSE KEY: Not Ready
> ASC/ASCQ: Medium Not Present
