I'll look into this. Thanks for the useful report.
On Mon, Oct 24, 2005 at 04:38:27PM -0500, [EMAIL PROTECTED] wrote:
> heya,
>
> i got an LSI MegaRAID SATA 300-8X a couple weeks ago and i
> noticed it was not quite "behaving". by this i mean that i had
> a 200GB disk on which i had installed a 3.8 snapshot and i
> plugged it into the RAID controller and booted the machine. it
> loaded the kernel just fine, but when it came time to check
> the filesystems, i got a blue kernel message that said:
>
> ami0: out of bounds 390,716,864 - 1 >= 388,671,488
>
> so apparently the controller did not grok the last little
> portion of the disk i had attached, but the machine i had
> installed the 3.8 snapshot from had done so just fine.
>
> i then tried to reinstall onto that disk from the CD drive i
> have attached to the machine with the RAID controller in it.
> when it came time to create the partitions with disklabel, i
> got the same error as before and it occurred when my /home
> partition was being initialized.
>
> to work around this i've made sure to only allocate less than
> the 388,671,488 sectors that the controller is seeing. now
> things are running fine.
>
> i don't know if this qualifies as a "bug", but my ear is
> really bothering me and i suddenly want to kill Captain Kirk.
>
> here's my dmesg:
>
> OpenBSD 3.8-current (GENERIC.MP) #338: Sat Oct 8 12:43:21 MDT
> 2005
>
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
> real mem = 268017664 (261736K)
> avail mem = 237666304 (232096K)
> using 3297 buffers containing 13504512 bytes (13188K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 04/23/03, BIOS32
> rev. 0 @ 0xfdba0
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown, estimated 0:00 hours
> apm0: APM get event: interface not connected (3)
> apm0: APM get event: interface not connected (3)
> apm0: disconnected
> apm0: flags 30102 dobusy 0 doidle 0
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4b70/192 (10 entries)
> pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4
> SouthBridge" rev 0x00)
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x2200 0xca800/0x1000
> 0xcb800/0x1000
> ipmi at mainbus0 not configured
> mainbus0: Intel MP Specification (Version 1.4) (AMI
> CNB30LE )
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 132 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel Pentium III ("GenuineIntel" 686-class) 1 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
> mainbus0: bus 0 is type PCI
> mainbus0: bus 1 is type PCI
> mainbus0: bus 2 is type PCI
> mainbus0: bus 3 is type ISA
> ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 11, 16 pins
> ioapic1 at mainbus0: apid 9 pa 0xfec01000, version 11, 16 pins
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
> pci1 at pchb1 bus 1
> ppb0 at pci1 dev 3 function 0 vendor "Intel", unknown product
> 0x0335 rev 0x07
> pci2 at ppb0 bus 2
> ami0 at pci2 dev 14 function 0 "Symbios Logic MegaRAID SATA
> 8x" rev 0x07: apic 9 int 7 (irq 10) LSI 3008/32b
> ami0: FW 813G, BIOS vH425, 128MB RAM
> ami0: 1 channels, 0 FC loops, 1 logical drives
> scsibus0 at ami0: 40 targets
> sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2
> 0/direct fixed
> sd0: 189781MB, 189781 cyl, 64 head, 32 sec, 512 bytes/sec,
> 388671488 sec total
> scsibus1 at ami0: 16 targets
> vga1 at pci0 dev 1 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> fxp0 at pci0 dev 4 function 0 "Intel 82557" rev 0x08, i82559:
> apic 9 int 4 (irq 9), address 00:e0:81:04:64:96
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> fxp1 at pci0 dev 5 function 0 "Intel 82557" rev 0x08, i82559:
> apic 9 int 5 (irq 5), address 00:e0:81:04:64:97
> inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
> pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4
> SouthBridge" rev 0x50
> pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev
> 0x00: DMA
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus2 at atapiscsi0: 2 targets
> cd0 at scsibus2 targ 0 lun 0: <DELTA, OIP-SD2400A/BM, 5.6i>
> SCSI0 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB"
> rev 0x04: apic 8 int 10 (irq 10), version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask 0 netmask 0 ttymask 0
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
>
> regards,
> jake
