-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I concur, I have also the exact network card, and have no problem with
3.7.
- --snip--
em0 at pci0 dev 14 function 0 "Intel PRO/1000MT DP (82546EB)" rev
0x03: irq 10, address:00:04:23:b7:87:16
em1 at pci0 dev 14 function 1 "Intel PRO/1000MT DP (82546EB)" rev
0x03: irq 5, address: 00:04:23:b7:87:17
- --snip--
- --full dmesg--
OpenBSD 3.7 (RAMDISK_CD) #573: Sun Mar 20 00:27:05 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Pentium(R) 4 CPU 1.70GHz ("GenuineIntel" 686-class)
1.72 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem = 129589248 (126552K)
avail mem = 112664576 (110024K)
using 1607 buffers containing 6582272 bytes (6428K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(dc) BIOS, date 05/03/02, BIOS32 rev. 0 @
0xf11c0
apm0 at bios0: Power Management spec V1.2
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x19b2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1930/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 650 PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "SIS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 650 VGA" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 961 PCI" rev 0x00
ohci0 at pci0 dev 2 function 2 "SIS 5597/5598 USB" rev 0x07: irq 9,
version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 3 "SIS 5597/5598 USB" rev 0x07: irq 9,
version 1.0, legacy support
ohci1: SMM does not respond, resetting
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0xd0: 650: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340015A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <, CD-S520/A, 1.8X> SCSI0 5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
"SIS 7012 AC97" rev 0xa0 at pci0 dev 2 function 7 not configured
em0 at pci0 dev 14 function 0 "Intel PRO/1000MT DP (82546EB)" rev
0x03: irq 10, address: 00:04:23:b7:87:16
em1 at pci0 dev 14 function 1 "Intel PRO/1000MT DP (82546EB)" rev
0x03: irq 5, address: 00:04:23:b7:87:17
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fbc5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Genius NetScroll, rev 1.10/1.10, addr 2, iclass 3/1
uhid at uhidev0 not configured
wd0: no disk label
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
wd0: no disk label
syncing disks... OpenBSD 3.7 (RAMDISK_CD) #573: Sun Mar 20 00:27:05
MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Pentium(R) 4 CPU 1.70GHz ("GenuineIntel" 686-class)
1.72 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem = 129589248 (126552K)
avail mem = 112664576 (110024K)
using 1607 buffers containing 6582272 bytes (6428K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(dc) BIOS, date 05/03/02, BIOS32 rev. 0 @
0xf11c0
apm0 at bios0: Power Management spec V1.2
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x19b2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1930/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 650 PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "SIS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 650 VGA" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 961 PCI" rev 0x00
ohci0 at pci0 dev 2 function 2 "SIS 5597/5598 USB" rev 0x07: irq 9,
version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 3 "SIS 5597/5598 USB" rev 0x07: irq 9,
version 1.0, legacy support
ohci1: SMM does not respond, resetting
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0xd0: 650: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340015A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <, CD-S520/A, 1.8X> SCSI0 5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
"SIS 7012 AC97" rev 0xa0 at pci0 dev 2 function 7 not configured
em0 at pci0 dev 14 function 0 "Intel PRO/1000MT DP (82546EB)" rev
0x03: irq 10, address: 00:04:23:b7:87:16
em1 at pci0 dev 14 function 1 "Intel PRO/1000MT DP (82546EB)" rev
0x03: irq 5, address: 00:04:23:b7:87:17
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fbc5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Genius NetScroll, rev 1.10/1.10, addr 2, iclass 3/1
uhid at uhidev0 not configured
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
syncing disks... OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 1.70GHz ("GenuineIntel" 686-class)
1.72 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem = 129589248 (126552K)
avail mem = 111685632 (109068K)
using 1607 buffers containing 6582272 bytes (6428K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(dc) BIOS, date 05/03/02, BIOS32 rev. 0 @
0xf11c0
apm0 at bios0: Power Management spec V1.2 (BIOS mgmt disabled)
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x19b2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1930/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 650 PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "SIS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 650 VGA" rev 0x00: aperture at
0xf0000000, size 0x400000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 961 PCI" rev 0x00
ohci0 at pci0 dev 2 function 2 "SIS 5597/5598 USB" rev 0x07: irq 9,
version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 3 "SIS 5597/5598 USB" rev 0x07: irq 9,
version 1.0, legacy support
ohci1: SMM does not respond, resetting
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0xd0: 650: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340015A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <, CD-S520/A, 1.8X> SCSI0 5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 2 function 7 "SIS 7012 AC97" rev 0xa0: irq 9,
SiS7012 AC97
ac97: codec id 0x414c4710 (Avance Logic ALC200)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
em0 at pci0 dev 14 function 0 "Intel PRO/1000MT DP (82546EB)" rev
0x03: irq 10, address: 00:04:23:b7:87:16
em1 at pci0 dev 14 function 1 "Intel PRO/1000MT DP (82546EB)" rev
0x03: irq 5, address: 00:04:23:b7:87:17
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fb45 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Genius NetScroll, rev 1.10/1.10, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Kenneth P. Oncinian
Network Administrator
Panasonic Communications Philippines Corporation
Information Systems Division - Network and Systems Group
- --
PGP Public Key: http://m.1asphost.com/koncinian/koncinian.gnupg.key
Kory Talmage wrote:
> I have the exact same PCI card and have no problems since 3.7.
> Using it on a Tyan S2707 motherboard.
>
> Kory T
>
> On Oct 18, 2005, at 11:10 AM, Jason Dixon wrote:
>
>> On Oct 17, 2005, at 8:59 PM, Damien Gardner Jnr wrote: [
>> Redirecting back to misc@ where this belongs ]
>>
>>
>>> From: "Ken Gunderson" <[EMAIL PROTECTED]> To:
>>> <[email protected]>
>>>
>>>
>>>> I'm having some issues w/an Intel PRO/1000 MT Dual Port
>>>> Server Adapter in an OBSD-3.7 firewall. The card is in the
>>>> pci-x riser on one of these puppies; Dmesg complains the "The
>>>> EEPROM Checksum Is Not Valid". I've tested the card in a
>>>> Winblows machine and it works. Any insights as to what is
>>>> going on here greatly appreciated.
>>>>
>>>
>>> We had exactly the same problem with dual and quad versions of
>>> these same cards - we ended up swapping to PCI cards and
>>> changing the motherboard to something with enough PCI slots to
>>> support all the cards.. :\
>>>
>>
>> If this is the case, I'm glad this became public. I'm about to
>> fork out for some of these. Can anyone suggest any specific
>> Gig-E dual port cards that work well with 3.7-3.8? Vendor
>> recommendations welcome.
>>
>> Thanks,
>>
>> -- Jason Dixon DixonGroup Consulting http://www.dixongroup.net
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFDVGLv9MTaiXoaMBgRAn39AKCW98ervo++LMa0GOaFCN2dDC72wwCcD19l
bVz1sna00J+qJlY8CmYYfm4=
=uq7p
-----END PGP SIGNATURE-----
