Dear list,
since some snapshot between 4.8 and 4.9, ifconfig prints the same
ipv6 address acquired via autoconfiguration twice for me:
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr <mac address>
priority: 0
groups: egress
media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause)
status: active
inet6 <link-local address> prefixlen 64 scopeid 0x1
inet 192.168.53.252 netmask 0xfffffc00 broadcast 192.168.55.255
inet6 <global address> prefixlen 64 autoconf pltime 604747 vltime
2591947
inet6 <global address> prefixlen 64 autoconf pltime 604747 vltime
2591947
I don't know which particular change is responsible for this; I
have not found anything which seemed related.
Thanks in advance,
Dennis den Brok
--
OpenBSD 4.9 (GENERIC.MP) #785: Fri Feb 18 14:16:01 MST 2011
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz ("GenuineIntel" 686-class)
2.68 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
real mem = 2146590720 (2047MB)
avail mem = 2101313536 (2003MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/30/08, SMBIOS rev. 2.5 @ 0xfca00 (74
entries)
bios0: vendor American Megatrends Inc. version "V1.4" date 07/30/2008
bios0: MICRO-STAR INTERNATIONAL CO.,LTD MS-7519
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET SSDT
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) PS2K(S1) PS2M(S1) USB0(S4)
USB1(S4) USB2(S4) USB5(S4) EUSB(S4) USB3(S4) USB4(S4) USB6(S4) USBE(S4)
P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 334MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz ("GenuineIntel" 686-class)
2.68 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P1)
acpiprt2 at acpi0: bus 2 (P0P4)
acpiprt3 at acpi0: bus 3 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus 4 (P0P9)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x10000
cpu0: Enhanced SpeedStep 2674 MHz: speeds: 2670, 2336, 2003 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel G45 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel G45 PCIE" rev 0x03: apic 2 int 16 (irq 10)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon HD 2400 XT" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 2 int 16 (irq 10)
drm0 at radeondrm0
azalia0 at pci1 dev 0 function 1 "ATI RS690M HD Audio" rev 0x00: apic 2 int 17
(irq 5)
azalia0: no supported codecs
azalia0: initialization failure, detaching
uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 2 int 16
(irq 10)
uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 2 int 21
(irq 11)
uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 2 int 19
(irq 15)
ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 2 int 18
(irq 14)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia1 at pci0 dev 27 function 0 "Intel 82801JI HD Audio" rev 0x00: apic 2 int
22 (irq 3)
azalia1: codecs: Realtek ALC888
audio0 at azalia1
ppb1 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: apic 2 int 17
(irq 5)
pci2 at ppb1 bus 2
jmb0 at pci2 dev 0 function 0 "JMicron JMB368 IDE" rev 0x00
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 2 int 16 (irq 10) for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, DVD-ROM PX-130A, 1.01> ATAPI 5/cdrom
removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ppb2 at pci0 dev 28 function 1 "Intel 82801JI PCIE" rev 0x00: apic 2 int 16
(irq 10)
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 5 "Intel 82801JI PCIE" rev 0x00: apic 2 int 16
(irq 10)
pci4 at ppb3 bus 4
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c00),
apic 2 int 17 (irq 5), address xx:xx:xx:xx:xx:xx
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 2 int 23
(irq 7)
uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 2 int 19
(irq 15)
uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 2 int 18
(irq 14)
ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 2 int 23
(irq 7)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00
ahci0 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: apic 2 int 19
(irq 15), AHCI 1.2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 2 lun 0: <ATA, ST3250410AS, 3.AA> SCSI3 0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
sd1 at scsibus1 targ 4 lun 0: <ATA, SAMSUNG HM080HI, AB10> SCSI3 0/direct fixed
sd1: 76319MB, 512 bytes/sec, 156301488 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 2 int 18
(irq 14)
iic0 at ichiic0
iic0: addr 0x28 01=0d 02=00 03=0a 04=b0 05=80 06=0a 07=37 41=0d 42=00 43=0a
44=b0 45=80 46=0a 47=37 81=0d 82=00 83=0a 84=b0 85=80 86=0a 87=37 c1=0d c2=00
c3=0a c4=b0 c5=80 c6=0a c7=37 words 00=ff0d 01=0d00 02=000a 03=0aff 04=b0ff
05=80ff 06=0aff 07=ffff
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 15 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
fins0 at isa0 port 0x4e/2
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
ugen0 at uhub0 port 6 "Canon CanoScan" rev 2.00/3.06 addr 2
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Lite-On Technology Corp.
ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.26 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Lite-On Technology Corp.
ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.26 addr 2
uhidev1: iclass 3/0, 4 report ids
ums0 at uhidev1 reportid 1: 3 buttons
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=1, feature=0
uhid2 at uhidev1 reportid 4: input=0, output=0, feature=4
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd1a swap on sd1b dump on sd1b
ulpt0 at uhub3 port 1 configuration 1 interface 0 "Kyocera Kyocera FS-1030D"
rev 1.01/0.00 addr 2
ulpt0: using bi-directional mode
