Hi misc@,

I am too experiencing the booting problems described a few days ago for
the SL410. With the MP kernel, booting would sometines just stop at 
mtrr: Pentium Pro MTRR support,

forcing a hard reset of the machine. Other times it just works fine, not
following any apparent pattern.

How can I provide more info to debug this?

The second problem has already been reported multiple times. (Hardware
acceleration not working on some Radeon chips.) The corresponding PR is
user/6549, the symptoms are exactly as described there.

Maybe (?) related to that: Graphics are not resumed after suspend.
Xorg.0.log has lots of:

[607691.656] (EE) RADEON(0): Idle timed out, resetting engine...
[607691.875] (EE) RADEON(0): RADEONWaitForIdleCP: CP idle 16
[607691.875] (EE) RADEON(0): Idle timed out, resetting engine...
[607692.075] (EE) RADEON(0): RADEONWaitForIdleCP: CP idle 16
[607692.075] (EE) RADEON(0): Idle timed out, resetting engine...
[607692.275] (EE) RADEON(0): RADEONWaitForIdleCP: CP idle 16

messages after resume:
Feb 14 13:50:09 aias apmd: system resumed from APM sleep
Feb 14 13:50:09 aias /bsd: iwn0: RF switch: radio enabled
Feb 14 13:50:09 aias Tor[2339]: Your system clock just jumped 1436 seconds 
forward; assuming established circuits no longer work. 
Feb 14 13:50:09 aias Tor[2339]: Tried for 1470 seconds to get a connection to 
[scrubbed]:80. Giving up. (waiting for circuit) 
Feb 14 13:50:09 aias Tor[2339]: Tried for 1470 seconds to get a connection to 
[scrubbed]:80. Giving up. (waiting for circuit) 
Feb 14 13:50:10 aias /bsd: video0 detached
Feb 14 13:50:10 aias /bsd: uvideo0 detached
Feb 14 13:50:11 aias /bsd: uvideo0 at uhub1
Feb 14 13:50:11 aias /bsd:  port 6 configuration 1 interface 0 "Chicony 
Electronics Co., Ltd. Integrated Camera" rev 2.00/82.54 addr 2
Feb 14 13:50:11 aias /bsd: video0 at uvideo0
Feb 14 13:50:11 aias /bsd: ubt0 detached
Feb 14 13:50:11 aias /bsd: radeondrm0: wait idle failed status : 0xA0003028 
0x00000002
Feb 14 13:50:14 aias last message repeated 14 times
Feb 14 13:50:14 aias /bsd: ubt0 at uhub7
Feb 14 13:50:14 aias /bsd: radeondrm0: wait idle failed status : 0xA0003028 
0x00000002
Feb 14 13:50:15 aias /bsd:  port 1 "Broadcom Corp Broadcom Bluetooth Device" 
rev2.00/3.60 addr 2
Feb 14 13:50:15 aias /bsd: radeondrm0: wait idle failed status : 0xA0003028 
0x00000002
Feb 14 13:50:46 aias last message repeated 154 times



OpenBSD 4.9-beta (GENERIC.MP) #780: Thu Jan 20 17:21:34 MST 2011
    [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3182116864 (3034MB)
avail mem = 3083386880 (2940MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe0010 (44 entries)
bios0: vendor LENOVO version "6JET85WW (1.43 )" date 12/24/2010
bios0: LENOVO 2847D8G
acpi0 at bios0: rev 4
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG APIC BOOT SLIC SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) 
EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S4) PXSX(S4) RP01(S4) 
PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) 
RP06(S4) BLAN(S4) LID_(S3) SLPB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz, 6803.39 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz, 2194.50 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus 9 (P0P1)
acpiprt3 at acpi0: bus 2 (RP01)
acpiprt4 at acpi0: bus 3 (RP02)
acpiprt5 at acpi0: bus 4 (RP03)
acpiprt6 at acpi0: bus 5 (RP04)
acpiprt7 at acpi0: bus 6 (RP05)
acpiprt8 at acpi0: bus 8 (RP06)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpitz0 at acpi0: critical temperature 105 degC
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "42T4848" serial 55331 type LION oem "LGC"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
cpu0: Enhanced SpeedStep 2194 MHz: speeds: 2201, 2200, 1600, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 2 int 16 (irq 10)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility Radeon HD 4500" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 2 int 16 (irq 10)
drm0 at radeondrm0
azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 4000 HD Audio" rev 0x00: apic 2 
int 17 (irq 11)
azalia0: no supported codecs
azalia0: initialization failure, detaching
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16 (irq 
10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 (irq 
10)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19 (irq 
10)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 19 (irq 
10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia1 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 2 int 
22 (irq 10)
azalia1: codecs: Realtek ALC269
audio0 at azalia1
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2 int 17 (irq 
11)
pci2 at ppb1 bus 2
"JMicron SD/MMC" rev 0x00 at pci2 dev 0 function 0 not configured
sdhc0 at pci2 dev 0 function 2 "JMicron SD Host Controller" rev 0x00: apic 2 
int 16 (irq 10)
sdmmc0 at sdhc0
"JMicron Memory Stick" rev 0x00 at pci2 dev 0 function 3 not configured
"JMicron xD" rev 0x00 at pci2 dev 0 function 4 not configured
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 2 int 16 (irq 
10)
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 2 int 18 (irq 
10)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 2 int 19 (irq 
10)
pci5 at ppb4 bus 5
iwn0 at pci5 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: apic 2 int 19 
(irq 10), MIMO 1T2R, BGS, address 00:26:c7:ec:84:42
ppb5 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 2 int 17 (irq 
11)
pci6 at ppb5 bus 6
ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: apic 2 int 16 (irq 
10)
pci7 at ppb6 bus 8
re0 at pci7 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), 
apic 2 int 17 (irq 11), address 60:eb:69:b2:4c:48
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23 (irq 
10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19 (irq 
10)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18 (irq 
10)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23 (irq 
10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb7 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci8 at ppb7 bus 9
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 2 int 19 
(irq 10), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD3200BEVT-0, 02.0> SCSI3 0/direct fixed
sd0: 305245MB, 512 bytes/sec, 625142448 sec total
cd0 at scsibus0 targ 1 lun 0: <Optiarc, DVD RW AD-7700H, 1.L0> ATAPI 5/cdrom 
removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19 
(irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub1 port 6 configuration 1 interface 0 "Chicony Electronics Co., 
Ltd. Integrated Camera" rev 2.00/82.54 addr 2
video0 at uvideo0
ubt0 at uhub7 port 1 "Broadcom Corp Broadcom Bluetooth Device" rev 2.00/3.60 
addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
scsibus2 at softraid0: 1 targets
sd1 at scsibus2 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct fixed
sd1: 304740MB, 512 bytes/sec, 624108657 sec total

Reply via email to