Hi,
I'm having trouble with the atheros minipci card that came with my
ThinkPad X40. It worked fine in Windows XP, but in OpenBSD nothing
but pings go through (and even those are a bit lossy). For example,
here is one ping session:
[EMAIL PROTECTED] ping -s 1500 192.168.2.1
PING 192.168.2.1 (192.168.2.1): 1500 data bytes
1508 bytes from 192.168.2.1: icmp_seq=0 ttl=255 time=4.319 ms
1508 bytes from 192.168.2.1: icmp_seq=3 ttl=255 time=4.371 ms
1508 bytes from 192.168.2.1: icmp_seq=4 ttl=255 time=4.324 ms
1508 bytes from 192.168.2.1: icmp_seq=5 ttl=255 time=4.270 ms
1508 bytes from 192.168.2.1: icmp_seq=6 ttl=255 time=4.691 ms
1508 bytes from 192.168.2.1: icmp_seq=7 ttl=255 time=4.594 ms
1508 bytes from 192.168.2.1: icmp_seq=8 ttl=255 time=4.814 ms
--- 192.168.2.1 ping statistics ---
9 packets transmitted, 7 packets received, 22.2% packet loss
round-trip min/avg/max/std-dev = 4.270/4.483/4.814/0.204 ms
ssh has connected maybe once, and the connection was very spotty. Here is a
failed attempt:
[EMAIL PROTECTED] sudo tcpdump -tttnei ath0 host 192.168.2.3
tcpdump: listening on ath0, link-type EN10MB
Sep 13 23:21:16.323091 0:e:9b:b3:27:d1 0:12:17:63:80:d6 0800 78:
192.168.2.3.40181 > 192.168.2.1.22: S 2466529590:2466529590(0) win 16384 <mss
1460,nop,nop,sackOK,nop,wscale 0,nop,nop,timestamp 1874450672 0> (DF)
Sep 13 23:21:16.324008 0:12:17:63:80:d6 0:e:9b:b3:27:d1 0800 78: 192.168.2.1.22
> 192.168.2.3.40181: S 3357299196:3357299196(0) ack 2466529591 win 16384 <mss
1460,nop,nop,sackOK,nop,wscale 0,nop,nop,timestamp 3743802478 1874450672>
Sep 13 23:21:16.324047 0:e:9b:b3:27:d1 0:12:17:63:80:d6 0800 66:
192.168.2.3.40181 > 192.168.2.1.22: . ack 1 win 16384 <nop,nop,timestamp
1874450672 3743802478> (DF)
Sep 13 23:21:16.366656 0:12:17:63:80:d6 0:e:9b:b3:27:d1 0800 87: 192.168.2.1.22
> 192.168.2.3.40181: P 1:22(21) ack 1 win 17376 <nop,nop,timestamp 3743802478
1874450672>
Sep 13 23:21:16.366897 0:e:9b:b3:27:d1 0:12:17:63:80:d6 0800 86:
192.168.2.3.40181 > 192.168.2.1.22: P 1:21(20) ack 22 win 16384
<nop,nop,timestamp 1874450672 3743802478> (DF)
Sep 13 23:21:17.866222 0:e:9b:b3:27:d1 0:12:17:63:80:d6 0800 798:
192.168.2.3.40181 > 192.168.2.1.22: P 1:733(732) ack 22 win 16384
<nop,nop,timestamp 1874450675 3743802478> (DF)
Sep 13 23:21:20.866224 0:e:9b:b3:27:d1 0:12:17:63:80:d6 0800 798:
192.168.2.3.40181 > 192.168.2.1.22: P 1:733(732) ack 22 win 16384
<nop,nop,timestamp 1874450681 3743802478> (DF)
Sep 13 23:21:26.866224 0:e:9b:b3:27:d1 0:12:17:63:80:d6 0800 798:
192.168.2.3.40181 > 192.168.2.1.22: P 1:733(732) ack 22 win 16384
<nop,nop,timestamp 1874450693 3743802478>
Sep 13 23:21:38.866228 0:e:9b:b3:27:d1 0:12:17:63:80:d6 0800 798:
192.168.2.3.40181 > 192.168.2.1.22: P 1:733(732) ack 22 win 16384
<nop,nop,timestamp 1874450717 3743802478>
Sep 13 23:22:02.866228 0:e:9b:b3:27:d1 0:12:17:63:80:d6 0800 798:
192.168.2.3.40181 > 192.168.2.1.22: P 1:733(732) ack 22 win 16384
<nop,nop,timestamp 1874450765 3743802478>
Sep 13 23:22:50.866232 0:e:9b:b3:27:d1 0:12:17:63:80:d6 0800 798:
192.168.2.3.40181 > 192.168.2.1.22: P 1:733(732) ack 22 win 16384
<nop,nop,timestamp 1874450861 3743802478>
Sep 13 23:22:50.891957 0:12:17:63:80:d6 0:e:9b:b3:27:d1 0800 66: 192.168.2.1.22
> 192.168.2.3.40181: . ack 733 win 17376 <nop,nop,timestamp 3743802667
1874450861>
Sep 13 23:23:16.366395 0:12:17:63:80:d6 0:e:9b:b3:27:d1 0800 66: 192.168.2.1.22
> 192.168.2.3.40181: F 702:702(0) ack 733 win 17376 <nop,nop,timestamp
3743802718 1874450861>
Sep 13 23:23:16.366434 0:e:9b:b3:27:d1 0:12:17:63:80:d6 0800 78:
192.168.2.3.40181 > 192.168.2.1.22: . ack 22 win 16384 <nop,nop,timestamp
1874450912 3743802478,nop,nop,sack 1 {702:702} >
Sep 13 23:24:46.259978 0:12:17:63:80:d6 0:e:9b:b3:27:d1 0800 54: 192.168.2.1.22
> 192.168.2.3.19022: R 2616010305:2616010305(0) ack 2719100266 win 0
The ath0 in question:
[EMAIL PROTECTED] ifconfig ath0
ath0: flags=8963<UP,BROADCAST,NOTRAILERS,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu
1500
lladdr 00:0e:9b:b3:27:d1
media: IEEE802.11 autoselect (DS11 mode 11b)
status: active
ieee80211: nwid JenJen chan 3 bssid 00:12:17:63:80:d6
inet6 fe80::20e:9bff:feb3:27d1%ath0 prefixlen 64 scopeid 0x2
inet 192.168.2.3 netmask 0xffffff00 broadcast 192.168.2.255
A working ural0:
[EMAIL PROTECTED] ifconfig ural0
ural0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:11:95:eb:05:0a
media: IEEE802.11 autoselect (DS1)
status: active
ieee80211: nwid JenJen chan 3 bssid 00:12:17:63:80:d6 100dBm
inet 192.168.2.4 netmask 0xffffff00 broadcast 192.168.2.255
inet6 fe80::211:95ff:feeb:50a%ural0 prefixlen 64 scopeid 0x9
Anybody else have this problem?
-Ray-
dmesg:
OpenBSD 3.8-current (GENERIC) #0: Sat Sep 10 15:34:26 EDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.50GHz ("GenuineIntel" 686-class) 598 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 600 MHz (988 mV): speeds: 1500, 1200, 1000, 800, 600
MHz
real mem = 1600626688 (1563112K)
avail mem = 1453158400 (1419100K)
using 4278 buffers containing 80134144 bytes (78256K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(1c) BIOS, date 06/15/05, BIOS32 rev. 0 @ 0xfd740
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 89%
apm0: AC off, battery charge high, estimated 3:23 hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd6d0/0x930
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc800! 0xcc800/0x1000 0xcd800/0x1000 0xdc000/0x4000!
0xe0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at
0xe0000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 1
cbb0 at pci1 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
vendor "Ricoh", unknown product 0x0822 (class system unknown subclass 0x05, rev
0x13) at pci1 dev 0 function 1 not configured
em0 at pci1 dev 1 function 0 "Intel PRO/1000MT Mobile (82541GI)" rev 0x00: irq
11, address: 00:0a:e4:34:0c:ed
ath0 at pci1 dev 2 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5212 5.9 phy 4.3 rf2112 4.6, WOR4W, address 00:0e:9b:b3:27:d1
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK13FA-40B>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
"Intel 82801DB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4
AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
ural0 at uhub3 port 4
ural0: ANI 802.11g WLAN Adapter, rev 2.00/0.01, addr 2
ural0: MAC/BBP RT2570 (rev 0x03), RF RT2526, address 00:11:95:eb:05:0a
ural0: at uhub3 port 4 (addr 2) disconnected
ehci_idone: ex=0xd2e98000 is done!
ural0 detached
ural0 at uhub3 port 4
ural0: ANI 802.11g WLAN Adapter, rev 2.00/0.01, addr 2
ural0: MAC/BBP RT2570 (rev 0x03), RF RT2526, address 00:11:95:eb:05:0a
arp: attempt to add entry for 192.168.2.1 on ath0 by 00:12:17:63:80:d6 on ural0
arp: attempt to add entry for 192.168.2.1 on ath0 by 00:12:17:63:80:d6 on ural0
arp: attempt to add entry for 192.168.2.1 on ath0 by 00:12:17:63:80:d6 on ural0
arp: attempt to add entry for 192.168.2.1 on ath0 by 00:12:17:63:80:d6 on ural0
arp: attempt to add entry for 192.168.2.1 on ath0 by 00:12:17:63:80:d6 on ural0
arp: attempt to add entry for 192.168.2.1 on ath0 by 00:12:17:63:80:d6 on ural0
arp: attempt to add entry for 192.168.2.1 on ath0 by 00:12:17:63:80:d6 on ural0
