On Thu, Aug 11, 2005 at 06:04:49PM -0300, Gustavo Rios wrote:
> Does anybody have experience getting Thin Clients to work with OBSD?
> I was considering HP ones, but are too expensive. Any other suggestions?
>
I have OBSD running on Neoware Thin Clients (BS-EON6300T-4SM). The
dmesg from my firewall is below. PXE booted OpenBSD bsd.rd, wiped
out the existing WINCE image and away it went.
.... Ken
OpenBSD 3.7-current (GENERIC) #5: Sat Jul 23 18:24:01 EDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Nehemiah ("CentaurHauls" 686-class) 798 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,MTRR,PGE,CMOV,MMX,FXSR,SSE
cpu0: RNG
real mem = 259633152 (253548K)
avail mem = 230080512 (224688K)
using 3194 buffers containing 13082624 bytes (12776K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(2f) BIOS, date 11/06/03, BIOS32 rev. 0 @ 0xfb540
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf94
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf10/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12 15
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8605 PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "VIA VT8605 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 ProSavage PM133" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 6 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq 11,
address: 00:07:e9:14:57:0a
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x40
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <PQI IDE DiskOnModule>
wd0: 1-sector PIO, LBA, 187MB, 384000 sectors
wd0(pciide0:0:0): using PIO mode 0
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x1a: irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x40
auvia0 at pci0 dev 7 function 5 "VIA VT82C686 AC97" rev 0x50: irq 10
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: irq 15 address
00:e0:c5:6a:91:69
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask 73e5 netmask fbe5 ttymask fbe7
pctr: user-level cycle counter enabled
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
