Hello.
I am trying hard to get some USB devices to work on a VIA EPIA-V
board with VIA VT83C572
USB chipset using OpenBSD 3.7. I tried it with an USB stick an an USB
Ethernet adapter, both
worked on an other machine with an asus board and openbsd 3.6, so i
am sure that both
devices are OK.
The error i get is not very verbose: uhub0: device problem, disabling
port x
Somewhere i read that this could maybe be a power problem, so i
deattached so much
hardware as possible without effect.
Maybe somebody could give me a hint howto solve this problem.
Thanx in advance,
Marc Beyerlin
PS: #dmesg
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Samuel 2 ("CentaurHauls" 686-class) 800 MHz
cpu0: FPU,DE,TSC,MSR,MTRR,PGE,MMX
real mem = 796438528 (777772K)
avail mem = 719544320 (702680K)
using 4278 buffers containing 39923712 bytes (38988K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(cc) BIOS, date 12/02/02, BIOS32 rev. 0 @
0xfb140
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf94
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf20/112 (5 entries)
pcibios0: PCI Exclusive IRQs: 10 11 15
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8231 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000! 0xd0000/0xa000
0xda000/0x1800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8601 PCI" rev 0x05
ppb0 at pci0 dev 1 function 0 "VIA VT82C601 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Trident CyberBlade i1" rev 0x6a
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 17 function 0 "VIA VT8231 ISA" rev 0x10
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06:
ATA100, channel 0 configured to compatibility, channel 1 configured
to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400BB-00JHC0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x1e: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x1e: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 17 function 4 "VIA VT8231 PMG" rev 0x10
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x51: irq 11
address 00:40:63:ca:67:ad
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004063, model 0x0032, rev. 5
pciide1 at pci0 dev 20 function 0 "ITExpress IT8212F" rev 0x11: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using irq 15 for native-PCI interrupt
wd1 at pciide1 channel 0 drive 0: <SAMSUNG SP1614N>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd2 at pciide1 channel 0 drive 1: <WDC WD1600BB-00GUA0>
wd2: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd2(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
wd3 at pciide1 channel 1 drive 0: <WDC WD1600BB-00GUA0>
wd3: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd4 at pciide1 channel 1 drive 1: <WDC WD1600BB-00GUA0>
wd4: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd3(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
wd4(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask f76d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
uhub0: port 1, set config at addr 2 failed
uhub0: device problem, disabling port 1
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
dkcsum: wd2 matched BIOS disk 82
dkcsum: wd3 matched BIOS disk 83
dkcsum: wd4 matched BIOS disk 84
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhub0: device problem, disabling port 2
uhub0: device problem, disabling port 1
