Hello
I have installed and used sound successfully in the past. I reread the
man and faq pages
about sound but still no good.
This is an amd64 setup so I dont know if that is the reason for my
trouble. On motherboard
is nForce4 AC97 and USB is Creative Technology SB Live! 24-bit External.
Neither one works (or seems to work) but both are supported as far as
I know. The weirdest
thing is that the usb audio comes up as uaudio0 and audio1 on the
dmesg, however there
is no /dev/audio1 nor /dev/uaudio0. Am I missing something here?
Please take a look at dmesg, audioctl, and mixerctl output and let me
know what I can do
get either sound method working.
Thanks a lot, your help is appreciated
Robert
dmesg:
OpenBSD 3.7-current (GENERIC) #168: Tue Jul 12 13:10:43 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1073278976 (1048124K)
avail mem = 909172736 (887864K)
using 22937 buffers containing 107536384 bytes (105016K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3200+, 2010.52 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
"Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
"Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured
"Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "Nvidia nForce4 USB" rev 0xa2: irq 11,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 "Nvidia nForce4 USB" rev 0xa3: irq 12
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: Nvidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0 "Nvidia nForce4 AC-97" rev 0xa2: irq
5, nForce4 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "Nvidia nForce4 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CDRW/DVD SM-352B, T805> SCSI0
5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <SONY, DVD RW DW-U12A, 2.0c> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 7 function 0 "Nvidia nForce4 SATA 1" rev 0xa3: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide1: using irq 11 for native-PCI interrupt
pciide1: channel 0 ignored (not responding; disabled or no drives?)
pciide1: channel 1 ignored (not responding; disabled or no drives?)
pciide2 at pci0 dev 8 function 0 "Nvidia nForce4 SATA 2" rev 0xa3: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide2: using irq 12 for native-PCI interrupt
wd0 at pciide2 channel 0 drive 0: <Maxtor 6Y120M0>
wd0: 16-sector PIO, LBA, 117246MB, 240121728 sectors
pciide2: channel 1 ignored (not responding; disabled or no drives?)
ppb0 at pci0 dev 9 function 0 "Nvidia nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 5
pciide3 at pci1 dev 6 function 0 "CMD Technology PCI0680" rev 0x02
pciide3: bus-master DMA support present
pciide3: channel 0 configured to native-PCI mode
pciide3: using irq 3 for native-PCI interrupt
wd1 at pciide3 channel 0 drive 0: <Maxtor 6Y250P0>
wd1: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd1(pciide3:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide3: channel 1 configured to native-PCI mode
wd2 at pciide3 channel 1 drive 1: <Maxtor 6Y250P0>
wd2: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd2(pciide3:1:1): using PIO mode 4, Ultra-DMA mode 5
"C-Media Electronics CMI8738/C3DX Audio" rev 0x10 at pci1 dev 7
function 0 not configured
vga1 at pci1 dev 8 function 0 "ATI Radeon 9200 PRO" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon 9200 PRO 2nd" rev 0x01 at pci1 dev 8 function 1 not configured
pciide4 at pci1 dev 10 function 0 "CMD Technology SiI3114 SATA" rev 0x02: DMA
pciide4: using irq 5 for native-PCI interrupt
"Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci1 dev 11
function 0 not configured
skc0 at pci1 dev 12 function 0 "Marvell SKv2" rev 0x13: irq 11
skc0: Marvell Yukon Lite (0x9)
sk0 at skc0 port A: address 00:11:d8:a0:d8:59
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
"Nvidia CK804 LAN" rev 0xa3 at pci0 dev 10 function 0 not configured
ppb1 at pci0 dev 11 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 4
ppb2 at pci0 dev 12 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
"ATI Radeon X300" rev 0x00 at pci3 dev 0 function 0 not configured
"ATI Radeon X300 Sec" rev 0x00 at pci3 dev 0 function 1 not configured
ppb3 at pci0 dev 13 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 2
ppb4 at pci0 dev 14 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 1
"ATI Radeon X300" rev 0x00 at pci5 dev 0 function 0 not configured
"ATI Radeon X300 Sec" rev 0x00 at pci5 dev 0 function 1 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
umass0 at uhub1 port 6 configuration 1 interface 0
umass0: Genesys Logic USB Storage, rev 2.00/91.44, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <Generic, STORAGE DEVICE, 9144> SCSI0
0/direct removable
sd0: drive offline
sd1 at scsibus2 targ 1 lun 1: <Generic, STORAGE DEVICE, 9144> SCSI0
0/direct removable
sd1: drive offline
sd2 at scsibus2 targ 1 lun 2: <Generic, STORAGE DEVICE, 9144> SCSI0
0/direct removable
sd2: drive offline
sd3 at scsibus2 targ 1 lun 3: <Generic, STORAGE DEVICE, 9144> SCSI0
0/direct removable
sd3: drive offline
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uaudio0 at uhub0 port 9 configuration 1 interface 0: Creative
Technology SB Live! 24-bit External, rev 1.10/1.00, addr 2
uaudio0: audio rev 1.00, 6 mixer controls
audio1 at uaudio0
uhidev0 at uhub0 port 10 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 1.10/23.02, addr 3, iclass 3/1
ums0 at uhidev0: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
auich0: measured ac97 link rate at 48000 Hz
audioctl -a:
name=nForce4 AC97
version=0xa2
config=auich0
encodings=ulinear:8,mulaw:8*,alaw:8*,slinear:8*,slinear_le:16,ulinear_le:16*,slinear_be:16*,ulinear_be:16*
properties=full_duplex,mmap,independent
full_duplex=0
fullduplex=0
blocksize=4096
hiwat=10
lowat=1
monitor_gain=0
mode=
play.rate=48000
play.channels=2
play.precision=16
play.encoding=slinear_le
play.gain=127
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=4096
play.samples=14315520
play.eof=0
play.pause=0
play.error=1
play.waiting=0
play.open=0
play.active=0
play.buffer_size=65536
record.rate=48000
record.channels=2
record.precision=16
record.encoding=slinear_le
record.gain=191
record.balance=32
record.port=0x1
record.avail_ports=0x7
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=0
record.active=0
record.buffer_size=65536
record.errors=0
mixerctl -a:
outputs.master=255,255
outputs.master.mute=off
outputs.mono=255
outputs.mono.mute=on
outputs.mono.source=mixerout
outputs.headphones=255,255
outputs.headphones.mute=off
outputs.bass=255
outputs.treble=255
inputs.speaker=255
inputs.speaker.mute=off
inputs.phone=191
inputs.phone.mute=on
inputs.mic=191
inputs.mic.mute=on
inputs.mic.preamp=off
inputs.mic.source=mic0
inputs.line=191,191
inputs.line.mute=on
inputs.cd=191,191
inputs.cd.mute=on
inputs.video=255,255
inputs.video.mute=off
inputs.aux=191,191
inputs.aux.mute=on
inputs.dac=191,191
inputs.dac.mute=off
record.source=mic
record.volume=255,255
record.volume.mute=off
record.mic=0
record.mic.mute=off
outputs.loudness=off
outputs.spatial=off
outputs.spatial.center=0
outputs.spatial.depth=0
outputs.surround=255,255
outputs.surround.mute=on
outputs.center=255
outputs.center.mute=on
outputs.lfe=255
outputs.lfe.mute=on
