Hi.
Actually I don't know about usefulness my information but...
I have another machine - on Intel 7501VW2 with 2 Xeon. And I have
Intel SRCZCR RAID controller there.
So, with uniprocessor kernel it's recognized and work fine -
there is 3 SCSI acting and seen as one (RAID5) disk. desg follow
(actually, I'm already add raidframe here, but it's not attention
point here).
With multiprocessor kernel (earlier, without changes) loading goes
until
pctr: user-level cycle counter enabled
sd0(gdt0:0:0): timed out
sd0(gdt0:0:0): timed out
sd0(gdt0:0:0): timed out
...
I'm a little despair... But here is dmesg from uniproc, maybe it helps
somewhat. And I will be glad if someone explain this...
OpenBSD 3.7-stable (GENERIC) #1: Sat Jun 18 13:14:59 YEKST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 1073238016 (1048084K)
avail mem = 972398592 (949608K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/28/03, BIOS32 rev. 0 @ 0xfdb54
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3630/336 (19 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2480
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5200! 0xcd800/0x800 0xce000/0x800
0xce800/0x1800 0xd0000/0x1800 0xdd000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7501 MCH Host" rev 0x01
"Intel E7500 DRAM" rev 0x01 at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 3 function 0 "Intel E7500 MCH HI_C vppb 1" rev 0x01
pci1 at ppb0 bus 1
"Intel P64H2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci2 at ppb1 bus 2
gdt0 at pci2 dev 8 function 0 "Intel GDT RAID" rev 0x00: irq 9 dpmem fa000000
2-bus 1 cache device
gdt0: ver 222, cache on, strategy 2, writeback on, blksz 32
gdt0: raw feat 1 cache feat 101
scsibus0 at gdt0: 35 targets
sd0 at scsibus0 targ 0 lun 0: <ICP, Host drive #00, > SCSI2 0/direct fixed
sd0: 69931MB, 8915 cyl, 255 head, 63 sec, 512 bytes/sec, 143219475 sec total
scsibus1 at gdt0: 16 targets
scsibus2 at gdt0: 16 targets
"Intel P64H2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci3 at ppb2 bus 3
em0 at pci3 dev 7 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq 9,
address: 00:0e:0c:09:7b:8a
em1 at pci3 dev 7 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq 9,
address: 00:0e:0c:09:7b:8b
xl0 at pci3 dev 8 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 9, address
00:04:76:f2:41:a1
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
xl1 at pci3 dev 9 function 0 "3Com 3c905C 100Base-TX" rev 0x30: irq 9, address
00:01:03:e3:0a:35
ukphy0 at xl1 phy 24: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00601d, model 0x0035, rev. 0
"Intel E7500 MCH HI_C vppb 2" rev 0x01 at pci0 dev 3 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
pci4 at ppb3 bus 4
vga1 at pci4 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP1203N>
wd0: 16-sector PIO, LBA48, 114498MB, 234493056 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, N102> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801CA/CAM SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask efe5 netmask efe5 ttymask ffe7
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
dkcsum: sd0 matched BIOS disk 81
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
engineer
