Wait for a new -current snapshot to come out, I added
support for this card. It should attach as [EMAIL PROTECTED]
// Brad
On Sun, May 29, 2005 at 12:30:13AM +1000, Ben Hooper wrote:
> Dmesg below of an Abocom 10/100 CardBus device. Is anyone familiar with them
> and able to hack up a patch?
>
> Ben.
>
> OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 647 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,
> SSE
> real mem = 536387584 (523816K)
> avail mem = 482652160 (471340K)
> using 4278 buffers containing 26923008 bytes (26292K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(ff) BIOS, date 07/23/01, BIOS32 rev. 0 @ 0xf0210
> apm0 at bios0: Power Management spec V1.2 (BIOS mgmt disabled)
> apm0: APM power management enable: unrecognized device ID (9)
> apm0: APM engage (device 1): power management disabled (1)
> apm0: battery life expectancy 100%
> apm0: AC on, battery charge high
> pcibios0 at bios0: rev 2.1 @ 0xf0200/0xb00
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb9d0/112 (5 entries)
> pcibios0: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff
> pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0x10000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Acer Labs M1621 PCI" rev 0x05
> ppb0 at pci0 dev 1 function 0 "Acer Labs M5247 AGP/PCI-PCI" rev 0x01
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> autri0 at pci0 dev 6 function 0 "Acer Labs M5451 Audio" rev 0x01: irq 10
> ac97: codec id 0x43525934 (Cirrus Logic CS4299 rev 4)
> ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
> audio0 at autri0
> midi0 at autri0: <4DWAVE MIDI UART>
> pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
> pciide0 at pci0 dev 16 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG MP0804H>
> wd0: 16-sector PIO, LBA48, 76351MB, 156368016 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-ROM CR-177, 7T03> SCSI0 5/cdrom
> removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> "Acer Labs M7101 Power Mgmt" rev 0x00 at pci0 dev 17 function 0 not
> configured
> cbb0 at pci0 dev 19 function 0 "O2 Micro OZ6933 CardBus" rev 0x01: irq 11
> cbb1 at pci0 dev 19 function 1 "O2 Micro OZ6933 CardBus" rev 0x01: irq 11
> ohci0 at pci0 dev 20 function 0 "Acer Labs M5237 USB" rev 0x03: irq 11,
> version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
> wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi1 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20
> pcmcia1 at cardslot1
> biomask eb6d netmask eb6d ttymask fbef
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> CardBus, Fast Ethernet, V1.0, (manufacturer 0x0, product 0x0) vendor
> "Abocom", unknown product 0xab08 (class network subclass ethernet, rev 0x11)
> at cardbus0 dev 0 function 0 not configured
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> WARNING: /mnt was not properly unmounted
