Ok, Try forwarding to the list again...
Nasa ----- Forwarded Message ----- From: "Nasa" <[email protected]> To: "Rudolf Streif" <[email protected]> Cc: [email protected], [email protected] Sent: Friday, July 8, 2011 12:20:11 PM Subject: Re: [MeeGo-ivi] Flash drive Issue, or is this a bug? Rudi, No - this is the only one of those I have. I have tried it on a number of systems and my meego box is the only one showing this error. I should note that the vfat partition works fine and both partitions are automagically mounted at boot-up. The fact that the 'U3 System' is mounted makes getting this error even more odd. BTW: I've thrown this on the devel list as well, per suggestion from Joel. Nasa ----- Original Message ----- > Hi Nasa, > > > I am using these Sandisk Cruzer flash drives too that you can buy by > in packs of three at Costco. > > > They have a readonly partition called "U3 System" that typically is > /dev/sr0 or /dev/sr1 dependent on if you have another readonly device > such as a CDROM drive in your system. This partition is useless for > MeeGo since it contains Windoze tools. > > > The read/write flash partition typically is /dev/sdc. This is the > partition you want. > > > I have never encountered the error you are reporting and it could very > much be that this is an issue particular to the drive you have. Do you > have other Cruzers that show the same issue? > > > Rudi > > > On Fri, Jul 8, 2011 at 4:41 AM, Nasa < [email protected] > wrote: > > > Hi guys, > > I was hoping one of you would have some idea about this > error message I am getting -- and tell me if this is a > bug or a flash drive issue. > > The problem is I am seeing the following error (paraphrased) > in my /var/log/messages file: > > "VFS busy inodes on changed media or resized disk, sr0" > > sr0 is the flash drive -- which is automounted during boot > up (ie: /media/Cruzer and /media/U3 System). If it was just > this single message, I probably would haven't even noticed - > but a single copy isn't what I get. No, I see two things > related to this error: > > 1) a high process usage for process named udevd > > 2) LARGE message files... ie: the VFS message creates Files > in the MB range (I actually failed to clean it out at one > point until it was over 50M big) > > > Mounting sr0 is = /media/U3 System and mounting it works > without out any new errors. I haven't noted if mounting > sr0 stops the error messages. > > Any ideas on this? > > Thanks, > > Nasa > _______________________________________________ > MeeGo-ivi mailing list > [email protected] > http://lists.meego.com/listinfo/meego-ivi _______________________________________________ MeeGo-ivi mailing list [email protected] http://lists.meego.com/listinfo/meego-ivi _______________________________________________ MeeGo-dev mailing list [email protected] http://lists.meego.com/listinfo/meego-dev http://wiki.meego.com/Mailing_list_guidelines
