Hello, I cross-compiled the emcapplication and forgot to install and compile the machinekit-hal package. So, of course, nothing would work...
Seth P.S. I am installing the repo. now from github.com. I will return service once I finish installed and then testing. On Saturday, February 27, 2021 at 6:08:44 PM UTC-6 [email protected] wrote: > OK, > > let's get the high ground overview and get the EMCApplication installed > first on AMD64 system. Only after this is done and working, we will attack > these other issues. > > I will use a Docker container, as it is easy to spin up and clean after, > but feel free to try it on a normal install (Debian) too: > > First start Docker container with passed X11 socket and DISPLAY > environment and DBUS socket for announcement: > > docker run -it --rm -e DISPLAY=${DISPLAY} -v > /var/run/dbus/system_bus_socket:/var/run/dbus/system_bus_socket -v > /tmp/.X11-unix:/tmp/.X11-unix -v /dev/dri:/dev/dri debian:buster bash -i > > In it prepare basic setup and test it with firefox: > > apt-get update > apt-get -y upgrade > apt-get install -y sudo > echo "ALL ALL = (ALL) NOPASSWD: ALL" >> /etc/sudoers > adduser mk > sudo apt-get install -y firefox-esr > > test with 'firefox' and you should see a firefox window appear of > application running in Docker. Then install the prerequisites for > Machinekit-HAL and EMCApplication: > > sudo apt-get install -y curl > curl -1sLf \ > ' > https://dl.cloudsmith.io/public/machinekit/machinekit/cfg/setup/bash.deb.sh' > \ > | sudo -E bash > curl -1sLf \ > ' > https://dl.cloudsmith.io/public/machinekit/machinekit-hal/cfg/setup/bash.deb.sh' > > \ > | sudo -E bash > curl -1sLf \ > ' > https://dl.cloudsmith.io/public/machinekit/emcapplication/cfg/setup/bash.deb.sh' > > \ > | sudo -E bash > > Now we need to install that special solver we were talking about as > standard Debian APT cannot solve the dependencies: > > sudo apt-get install -y apt-cudf > > and install EMCApplication: > > sudo apt-cudf-get --solver aspcud -o APT::Get::Assume-Yes=1 -o > Debug::pkgProblemResolver=0 -o APT::Install-Recommends=0 install > emcapplication > > and then run: > > linuxcnc > > You then should be able to see a configuration selection window, select > AXIS sim and run. You should see a basic simulation. > > Please confirm you can get it running. > > Cern. > > > Feb 27, 2021, 00:54 by [email protected]: > > > Hello, > > > > I few, quick references here... > > > > Would it be easier to make emcapplication once LinuxCNC is installed? > > > > Oh and... > > > > Is there a cure all outside of building the binaries from scratch? > > > > Seth > > On Wednesday, February 24, 2021 at 7:36:28 PM UTC-6 Mala Dies wrote: > > > >> Hello, > >> > >> I have been trying to install machinekit-hal and emcapplication. I got > some pointers here and there... > >> > >> The issue is that emcapplication does not work in my eyes yet. > >> > >> I have been unable to install it, compile it, and/or compile plus > install it from Cloudsmith repositories. > >> > >> So, machinekit-hal is done. I can run halcmd and halrun. This is not an > issue. > >> > >> Does emcapplication work yet or still? I am in the middle of a build > right now. > >> > >> I am installing the python2 libs. right now to handle the > emcapplication dependencies. > >> > >> ... > >> > >> Also, I have quickly gotten the Cloudsmith repo. items for > machinekit-hal and emcapplication if this will help. I can easily install > the .deb packages w/: > >> > >> sudo apt install ./*.deb. > >> > >> But... > >> > >> Will it work? Have you seen anything online about it working? I started > an issue or error source for the emcapplication online on the >> > github.com <http://github.com>>> repo. but deleted it (as I am too way > unfamiliar with this process so far). > >> > >> If you have any pointers for > this: linuxcnc-build-deps_2.9.0~pre0.23585.git42bf973af~buster_all.deb > >> > >> Please let me know. It seems I keep getting this repo. .deb and it is > not allowing me, the machine/internet/machinekit compilation, to access the > updated version of machinekit-hal that is current. > >> > >> Also: > >> > >> Adding a new item to changelog: > >> ================================================================= > >> linuxcnc (2.9.0~pre0.23585.git42bf973af~buster) Buster; urgency=low > >> > >> * Machinekit EMCApplication is build from LinuxCNC code, but is not > part of > >> LinuxCNC and as such the lower entries are NOT accurate > >> * Commit: 42bf973af68d1ee4f18a3c43af15d49c0ea4bf54 > >> * Merge pull request #7 from cerna/merge-21-october-2020 > >> * Build as an 23585th rebuild for Debian Buster armhf > >> > >> -- xxxx xxxxxxx <>> [email protected] <>>> > Thu, 25 Feb 2021 > 01:04:49 +0000 > >> New package version number added to changelog > >> successfully configured for 'ext-hal-Debian-10'-'machinekit-hal'.. > >> > >> The above pops up when I have a 'valid' install of this command: > >> > >> debian/configure > machinekit-hal=${WANTED_VERSION_OF_MACHINEKIT_HAL_PACKAGES} no-docs > >> > >> Then, when I apply the next command for the compilation, I receive a > bunch of issues/errors. > >> > >> This one: > >> > >> mk-build-deps \ --install \ --remove \ --root-cmd sudo \ --tool > \ 'apt-cudf-get --solver aspcud -o APT::Get::Assume-Yes=1 -o > Debug::pkgProblemResolver=0 -o APT::Install-Recommends=0' \ debian/control > >> > >> Seth > >> > >> P.S. I will report the errors soon. I will run the source again once > compiled (if I can get it compiled) and then return service. Also, I > started a small set up of instructions here: > >> > >> https://gist.github.com/silver2row/8d5b8ee4d1917d896c24c24bd56ba5f4 > >> > > > > > > > > -- > > website: > http://www.machinekit.io> blog: > http://blog.machinekit.io> > github: > https://github.com/machinekit > > --- > > You received this message because you are subscribed to the Google > Groups "Machinekit" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to > [email protected]> . > > To view this discussion on the web visit > > https://groups.google.com/d/msgid/machinekit/0444aa99-4a23-4c29-b55d-df15de57b36fn%40googlegroups.com > > < > https://groups.google.com/d/msgid/machinekit/0444aa99-4a23-4c29-b55d-df15de57b36fn%40googlegroups.com?utm_medium=email&utm_source=footer>> > > . > > > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/6e811d51-e0c6-4ca8-a19d-6c426e85e08cn%40googlegroups.com.
