I haven't seen much about this under Machinekit, but in Linuxcnc you can pause, and there is a script / button to allow you to job while paused. Alternatively you can usually ( because some gcode will get confused ) stop the run, move the spindle change a broken bit etc, and then select "run from selected line". you want to pick a line that will get the bit back into the appropriate place in all planes for this to work.
On Wednesday, January 6, 2021 at 9:39:27 AM UTC-6 [email protected] wrote: > Happy new year every body :-) > > I use in my work a Roland MDX40 CNC, on the front panel she has a "view > button" when i push this button during machining the spindle up on Z and > stop. > And when i push again the button the machinig restart where it was stopped. > Did you know how i could create the same button on Machine Kit panel? -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/7fa3aee6-2c55-48c0-80e8-17abe24725den%40googlegroups.com.
