Sadly no, i havent seen that one. And that comes back to my previous points on that the current work on machinekit is a bit obscured. The fact you have a cloudsmith repository going is news to me and not something ive seen in any of the documentation.
Looking at those actions tho ithey seem pretty stable. Once again i dont reeeally see the point of docker for the common user, but its the devops in me i guess. Docker is a great tool, but sometimes as devops i need to think of who is gonna use this.. And most likely that is not experienced developers and devops people. Gitub actions is a great use for these things tho. And also docker helps if one wanna regularly create release packages for the common user. // The Smurf. lördag 9 januari 2021 kl. 17:03:08 UTC+1 skrev [email protected]: > Hello, > > thank you for the writeup! Have you seen this: > https://github.com/zultron/linuxcnc-ethercat ? It is able to produce > packages in Github Actions CI workflow. > > Cern. > > Dne pondělí 4. ledna 2021 v 23:26:22 UTC+1 uživatel Moronic Smurf napsal: > >> These are some of my notes from building the packages of >> Machinekit/linuxcnc and getting linuxcnc-ethercat packages built in >> conjunction with the ethercatlabmaster packages. >> >> Hopefully this wil help some other poor schmuck trying to get ethercat >> servos running. >> But at this point in time i'm giving up. Mainly cuz machinekit build >> process is seemingly terribly broken and/or confusing. >> >> Link. >> https://gist.github.com/NeoTech/434c6f93e6c5e2471f8b2505b9d2f56c >> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/c2b6eeb8-9b84-44e0-a4b1-6febc7efd605n%40googlegroups.com.
