While the DEX_Nano_Soc's are using a SPI chip pin implementation is in the fpga fabric like this: https://github.com/machinekit/mksocfpga/blob/master/HW/QuartusProjects/Common/adc_ltc2308_fifo.sv
ADC (voltage) values are then directly presented via the mesa hostmot2 interface into the hal. So very different from a Rpi.implementastion via a spi driver port. Best Wishes Michael On Wednesday, July 1, 2020 at 7:07:56 AM UTC+2 [email protected] wrote: > Just to clarify, I'm interested in using the adc to read voltage not temps. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/6e5c1587-95ac-43c0-9887-4fdb960c8c65n%40googlegroups.com.
