New deb is still not working for SS although there is a minor change that I did not see before. the card status light will blink once, then fault, then status will blink again and fault. Previously the status light only lit one time.
On Tuesday, August 27, 2019 at 7:31:34 PM UTC-4, justin White wrote: > > It would certainly be nice to build firmware with docker with the Quartus > fixes you've made to the DExx_cramps config, in case I come up with some > other hardware. > > On Tuesday, August 27, 2019 at 5:41:28 AM UTC-4, Michael Brown wrote: >> >> That PR is waiting for the finalizing your pin file: >> >> https://github.com/the-snowwhite/mksocfpga/blob/sserial-work/HW/hm2/config/DExx_Nano_xxx_Cramps/PIN_st_fpga_soc_dc1f_ss.vhd >> >> >> after the PR is then commited and approved: >> When the MKSocfpga changes are merged the changes will show up in the mk >> deb (socfpga-rbf) packages, >> then you don't have to build yourself. >> >> >> >> >> On Tuesday, 27 August 2019 00:51:56 UTC+2, justin White wrote: >>> >>> BTW, have the DExx-cramps changes been merged in a way that I can do a >>> docker build on my end yet? >>> >>> On Monday, August 26, 2019 at 6:49:23 PM UTC-4, justin White wrote: >>>> >>>> There are comm errors thrown after discovery as mentioned on git, >>>> trying to determine if its the hardware or MK's hm2 driver ATM, Still a >>>> bit difficult to determine without a verifiable working instance of SS in >>>> current MK systems. >>>> >>>> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/6dc45fa8-2caf-4f78-9b14-45f4579c4818%40googlegroups.com.
