Yes there is only one switch - this is enough for calibrating x axis - no? It is max limit switch since it position is positive. Have you seen anything weird in my last configuration because I still cannot make this work? regards
On Wed, 21 Aug 2019 at 14:44, justin White <[email protected]> wrote: > That is a limit switch since it's at the very end of travel, but there's > only one switch? The first hal file you posted had that whole section > commented out. > > That is either your min-limit, or your max limit, depending on how that > thing is oriented. I would tend to call that the Min-limit but that's up > to you. If that's your minimum limit switch then you don't have a home or > max limit switch. > > > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to a topic in the > Google Groups "Machinekit" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/machinekit/6a9AUOleAXE/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/machinekit/e52adf48-2a4f-4eb2-bf1b-615648763e56%40googlegroups.com > <https://groups.google.com/d/msgid/machinekit/e52adf48-2a4f-4eb2-bf1b-615648763e56%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- Klemen Živkovič Župančičeva 34 1290 Grosuplje Slovenia mobile: 051 381 888 -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/CADO03Pqd-24Pmn-6HR85CF8d7AkqYCAJC4g%3D%2BBi0dVKbe%3DNzsw%40mail.gmail.com.
