Please keep questions on the list. I'm pretty sure the image should have a GUI, but I haven't tried the latest Stretch download for a while and updates are being handled by RCN. Is the HDMI out working (eg: you have a display, but it's a text terminal console) or is there no display at all?
If there's no display at all, check the uEnv.txt file and make sure HDMI is enabled. On 11/12/2018 10:05 PM, Peter Huerter wrote: > Thank you for the advice. I've flashed over the stretch image, but this > one doesn't seem to have a GUI? > > On Mon, Nov 12, 2018 at 8:23 AM Charles Steinkuehler < > [email protected]> wrote: > >> On 11/11/2018 7:57 PM, [email protected] wrote: >>> >>> I'm having trouble getting my copy of Machinekit configured on the >>> Beaglebone Black. I am currently getting the below error: >>> >>> [image: Machinekit_error_0.JPG] >>> >>> >>> Any suggestions would be greatly appreciated. I installed the below >> build: >>> >>> [image: Machinekit_error_1.jpg] >>> >>> Which was sourced from here: >>> >>> >> https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW.2FBBB_.28All_Revs.29_Machinekit >>> >>> >>> If anyone can help me with this I would be eternally thankful. >> >> Just start with the Stretch image, which is a bit further down the page: >> >> >> https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW.2FBBB_.28All_Revs.29_Machinekit_2 >> >> Try the Probotix configs as-is before making any changes. If the >> Probotix configs don't load, try some of the other BeagleBone configs >> (without any hardware attached, just the BeagleBone!) to see if they >> load. I don't think the Probotix configs get a lot of testing, so >> something may have gotten broken and not been noticed. >> >> -- >> Charles Steinkuehler >> [email protected] >> >> -- >> website: http://www.machinekit.io blog: http://blog.machinekit.io github: >> https://github.com/machinekit >> --- >> You received this message because you are subscribed to the Google Groups >> "Machinekit" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> Visit this group at https://groups.google.com/group/machinekit. >> For more options, visit https://groups.google.com/d/optout. >> > -- Charles Steinkuehler [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
