Bas, It's hard to pastebin an empty file.
/var/log/linuxcnc.log is empty, no errors are being logged. Hence the the comment "no errors, but hangs and effectively crashes the BBBW." You could imagine how hard it is from my end to diagnose a problem when the problem is not being logged as a problem. I'm referring to the HAL config file I attached. I'm trying to understand what if anything in the HAL config could be causing the beagleboard to become unusable *without posting any errors.* Apologies for any lack of clarity. Pierre On Monday, November 12, 2018 at 12:29:23 AM UTC-5, Bas de Bruijn wrote: > > Hi Pierre, > > On 12 Nov 2018, at 00:03, Pierre Auge <[email protected] <javascript:>> > wrote: > > This 3D printer CRAMPS config loads Axis with no errors, but hangs and > effectively crashes the BBBW. > > > And what does it say? What are the error messages? > export DEBUG=5 and start Machinekit. Then pastebin (do not attach) the > session from /var/log/linuxcnc.log > > We cannot start to guess what’s happening without some meaningful > information. > > It took me a while to wrap my head around this config but I feel like it > should work. > > > Which config exactly? > Again, we’re not looking over your shoulder so you need to provide more > input. > > Bas > > It is a dual x/y drive system with parallel motors on the X and Y axis. > 2X, 2Y, 1Z, and an extruder. Similar to the MPCNC. > > I've tested the standard cramps configs with the machine running with > motors in parallel on a single driver and everything is fine. > > > Thanks > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > > <CRAMPS.hal> > > <CRAMPS.ini> > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
