On 11/9/2018 1:11 PM, Johan Jakobsson wrote: > How would I go about setting up the DE10 as a standalone CNC controller? I > don't have another computer in the garage and my goal was to have the DE10 > as a standalone solution that starts when I power on the machine (as it's > powered from thje same powersupply as the CNC) and automatically starts > Machinekit which I can then connect to using Cetus/QtQuickVcp on a small > android tablet.
You need to specify a configuration setup for the Cetus remote UI instead of a local display when you launch machinekit. > Also, any idea on how to remove that second IP on eth0? Take a look in /etc/network/interfaces, otherwise I'm not sure. Which uSD Image did you start with (specific download link)? -- Charles Steinkuehler [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
