On Wednesday, May 16, 2018 at 7:06:51 AM UTC-8, Schooner wrote: > > > On 15/05/18 08:29, fairbanks-john wrote: > > I just made a fresh install from the git hub clone today and wondering > > if I did something wrong since there are a lot of warnings and notes > > in the installation log which I have attached.. > > The .hal file I have used before for testing fails to complete > > loading at the below error message: > > > > > > > This bit of the print clearly shows the problem is with your config, > which we have no details of > > /home/cnc/machinekit-dev/configs/cnc1/cnc1.ini:81: executing 'import sys > sys.path.insert(0,"python")' > PythonPlugin: Python '2.7.12 (default, Dec 4 2017, 14:50:18) > [GCC 5.4.0 20160609]' > emcTaskInit: using builtin interpreter > /home/cnc/machinekit-dev/configs/cnc1/cnc1.ini:81: executing 'import sys > sys.path.insert(0,"python")' > PythonPlugin: Python '2.7.12 (default, Dec 4 2017, 14:50:18) > [GCC 5.4.0 20160609]' > is_callable(__init__) = FALSE > is_callable(oword.on_abort) = FALSE > is_callable(oword.on_abort) = FALSE > /home/cnc/machinekit-dev/configs/cnc1/cnc1.ini:81: executing 'import sys > sys.path.insert(0,"python")' > PythonPlugin: Python '2.7.12 (default, Dec 4 2017, 14:50:18) > [GCC 5.4.0 20160609]' > Traceback (most recent call last): > File "/home/cnc/machinekit-dev/bin/gmoccapy", line 30, in <module> > import hal_glib # needed to make our own hal pins > File "/home/cnc/machinekit-dev/lib/python/hal_glib.py", line 20, in > <module> > from machinetalk.protobuf.message_pb2 import Container > File > "build/bdist.linux-x86_64/egg/machinetalk/protobuf/message_pb2.py", line > 16, in <module> > File "build/bdist.linux-x86_64/egg/machinetalk/protobuf/nanopb_pb2.py", > line 26, in <module> > TypeError: __init__() got an unexpected keyword argument 'syntax' > Shutting down and cleaning up Machinekit... > > Run an axis_mm sim, and I expect it will run perfectly, the problem is > with your config / gmoccapy / python > > syntax='proto2' has been in there for 2 years > > https://github.com/machinekit/machinekit/blob/master/src/machinetalk/proto/src/machinetalk/protobuf/nanopb.proto#L8 > > > but I don't use python, protobuf or gmoccapy, so can't help there, other > than wonder why your path to the machinetalk/protobuf files is > completely different > They should be in > > /home/cnc/machinekit-dev/lib/python/machinetalk/protobuf > > Are you using files from another build? > > > Warning: Logging appears to be not working > > Found rsyslogd configuration and /var/log/linuxcnc.log > exists, but a test did not appear in the log. > Please investigate. > > Makefile:842: recipe for target 'setuid' failed > > > This occurs as it says. Sometimes the rsyslogd daemon has died, the > linuxcnc.log has the wrong permissions and cannot be written to, or > similar. > You also do need to check that the setuid part worked, but there is no > indication it did not when realtime was started > > >
-- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
