Thanks Charles. Am I right in thinking that the second DB25 would be for connecting:
1/ LCD (character type for XYZ axis positions) 2/ Limit-switches 3/ MPG pendant 4/ Touch-Off-Plate To the group please let me know if there are specific recommendations on the above that play nice with the DE0_Nano and Machinekit, for instance: 1/ https://www.adafruit.com/product/198 (20x4 HD44780 LCD) 2/ https://www.adafruit.com/product/818 (switch with lever) 3/ https://cnc4pc.com/catalog/product/view/id/38/s/mpg2-pendant/category/157/ (MPG2) 4/ https://www.ebay.com/itm/291774184069?ViewItem=&item=291774184069 (T-O-P) Thanks. Richard On 21 February 2018 at 23:37, Charles Steinkuehler <[email protected]> wrote: > On 2/20/2018 11:39 PM, Richard Thornton wrote: >> Thanks again Charles. >> >> Could you please create a G540 configuration for a DE0-Nano? > > I'll try to get to this in the next day or two. I'll use the same > DB25 pinout as the other configurations, so if you want to you can get > one of the DE0-Nano_DB25 boards from OSH-Park, or you can just wire it > up by hand. > > Is there anything in particular you'd like on the second DB25 other > than GPIO pins? > > -- > Charles Steinkuehler > [email protected] > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to a topic in the Google > Groups "Machinekit" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/machinekit/Qj7VFVrRiYo/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
