I am getting an error lineardelta.hal:739: parameter or pin 'hpg.pwmgen.00.out.04.pin' not found can't seem to find the error or why the pin is not found i have it set got it here first then commented it out # E2 Heater FET 4 #setp hpg.pwmgen.00.out.03.pin 921 #setp hpg.pwmgen.00.out.03.enable 1 #setp hpg.pwmgen.00.out.03.value 0.0
now getting it at next one in line the fan 'hpg.pwmgen.00.out.04.pin' not found The bed, E0 and E1 are not having a pin problem its with a cramps.hal I have used this config setup before no problem i am running, run.py and loading the cramps_bbio any suggestions as where to look for the pin problem? Thanks gary -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
