I had my cramps wired and configured but had problems with the mcodes so disconnected it and put back my bebopr board and figured out what i was doing wrong..
Now i put back the cramps and reconnected it but i am having stepper motor problems as soon as i plug the board in to 12v the motors lockup and not when i hit the power or estop buttons in machinekit i can't get any motor movement no homing nothing, before i disconnected the cramps, the motors would only lock when i hit the power estop buttons in machinekit gui screen. i didn't change any thing with the wiring or connectors all is the same as before i disconnected it I get power to the stepper drives adjustment screws and can adjust them ok didn't change any jumpers on the board.. thanks for any suggestions Gary -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
