I got a USB OTG cable from Digikey and I am now able to boot the DE10-Nano with an HDMI monitor, keyboard and mouse.
On Tuesday, August 8, 2017 at 8:49:21 AM UTC-7, mugginsac wrote: > > Charles, > > I understand how ignoring HDMI to start may be easier, however, the reason > that I bought the DE10 instead of the DE0 is the HDMI. :-( > > Alan > > On Tuesday, August 8, 2017 at 4:01:07 AM UTC-7, Charles Steinkuehler wrote: >> >> Yes, it would be much easier to load a single FPGA image via U-Boot >> rather than deal with partial reconfiguration. >> >> I was planning on just ignoring the HDMI to start. :) >> >> On 8/7/2017 11:05 PM, Michael Brown wrote: >> > BTW >> > It may be possible to boot configuring the fpga from u-boot with >> framebuffer and >> > hm2 cores and then start machinekit hm2_soc_ol driver without >> firmware=xxx.dtbo >> > for easy DE10-Nano fb startup. (uio driver then needs a uio entty in >> dts also to >> > load). >> > >> > >> >> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
