Hello, I try to configure according according
http://www.machinekit.io/docs/examples/spindle/#pwm-spindle-speed but when I add addf pwmgen.make-pulses base-thread I receiving an error Also I try that https://www.mail-archive.com/[email protected]/msg00473.html and https://github.com/machinekit/machinekit/blob/master/configs/ARM/BeagleBone/PMDX-432/Shapeoko/Shapeoko.hal#L253 What I did wrong? неділя, 26 лютого 2017 р. 19:00:54 UTC+2 користувач Alexander Rössler написав: > > The scale HAL component should do exactly what you want: > http://www.machinekit.io/docs/man/man9/scale/ > <http://www.google.com/url?q=http%3A%2F%2Fwww.machinekit.io%2Fdocs%2Fman%2Fman9%2Fscale%2F&sa=D&sntz=1&usg=AFQjCNGqT5E_7wuqHL44bZLCxKDRcGvjsQ> > > You can set a gain and an offset value to convert the 0 -1 input to a > 40-60% of an PWM output value. > > Am Samstag, 25. Februar 2017 02:40:20 UTC+1 schrieb Andrij Senyk: >> >> Hello, >> >> I have BlackBuck 8M laser diode driver ( >> http://www.ebay.com/itm/BlackBuck-8M-8A-Buck-Laser-Driver-NDB7A75-NUBM44-NUMB05-NUBM06-NUBM08-/122257691806/?_ul=RU >> ) >> with next spec >> modulation input 0-5V or 0-5V TTL/PWM >> Frequency - 4kHz >> Modulation rise/fall time - 40/60ms >> >> I user arduino as TTL generator everything are ok but when duty cycle >> around 40% - 0% laser power, duty cycle 60% - 100% laser power >> >> Question possible to config on BBB >> 0-40% duty cycle - 0% laser power >> 60-100% duty cycle - 100% laser power >> >> and for example >> 41% duty cycle - 5% laser power >> 40,2% duty cycle - 1% laser power >> 40,5% duty cycle - 2,5% laser power >> etc >> >> another solution? >> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
