Hi there, first time poster and soon to be Machinekit user. I searched for this but couldn't find any info.
I have a small CNC driven by Mach3 that I am converting to run Machinekit. Currently the PC running Mach3 is in a separate box located about 3' from the control box. I would love to just put the BBB running Machinekit right inside my control box and only have a monitor, keyboard, etc located externally. However, do you think putting the BBB inside the control box is a bad idea because the control circuitry might introduce interference or mess with the BBB? My steel control box consists of an Unregulated 24v power supply(120vac>18vac toroidal transformer, rectifier, and very large capacitor), 3 Gecko G320X's(DC servo drives), limit-switch wires, and a few various switches, relays, etc. Thanks in advance! -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
