> On Mar 3, 2020, at 10:06 AM, Wu, Larry <[email protected]> wrote:
>
> Hi, Ross,
>
> Thanks for the reply.
> I already set the camera to send the SRTP stream.
> My question is what's the command to receive the SRTP stream?
The URL to use depends on the particular server (camera) that you are streaming
from. As always, you should consult the documentation for that camera to
figure this out; we don’t provide support for other companies’ products. But,
as I said before:
"The URLs that specify this differ depending on the camera type. Axis
cameras use "rtsp://" URLs with a port number of 322. Bosch cameras use a
"rtsps://" URL with a port number of 9554, with the URL ending with "/srtp=1"
(meaning: the server chooses the SRTP master key) or "/srtp=2" (meaning: the
client chooses the SRTP master key).”
Therefore, if you are streaming from an Axis camera, then you would use an URL
like
rtsp://<ip-address>:322/axis-media/media.amp
If you are streaming from a Bosch camera, then you would use an URL like
rtsps://<ip-address>:9554/srtp=1
Of course, replace <ip-address> with the IP address of your camera.
Ross Finlayson
Live Networks, Inc.
http://www.live555.com/
_______________________________________________
live-devel mailing list
[email protected]
http://lists.live555.com/mailman/listinfo/live-devel
