Hi Ross,
Thanks for help and I solved the problem. The reason of problem is that
RTPINTERFACE_BLOCKING_WRITE_TIMEOUT_MS value is not high enough and it
causes failure send function in sendDataOverTCP. Probably the root
reason is poor network quality.
Thanks again
Sincerely.
On 22.01.2020 13:39, Ross Finlayson wrote:
Cihan,
Note that the ‘interleaving’ (RTP/RTCP-over-RTSP) is happening only for your
‘front-end’ stream, which you are accessing using the VLC RTSP client
application. Unfortunately we can’t help you specifically with problems with
VLC, as that is not our software.
Instead, for testing, I suggest that you use our “openRTSP” command-line RTSP
client application as your ‘front-end’ RTSP client; see
http://www.live555.com/openRTSP/
However, I suspect that your problem, in reality, has nothing to do with
‘interleaving’. You can test this by first running
openRTSP rtsp://192.168.1.100:555/proxyStream
and then running
openRTSP -t rtsp://192.168.1.100:555/proxyStream
I suspect that you will end up with the same result in each case.
If the “LIVE555 Proxy Server” stops "sending RTP packets after several seconds”,
then it most likely means that the ‘back end’ server (in your case, the "Hanua IP
Cam”) has stopped streaming to the proxy server. (Again, this would have nothing to do
with ‘interleaving’, which is happening only with the ‘front end’ stream.) The only way
we could figure out what is happening with the ‘back end’ stream is for you to show us
the diagnostic output from the proxy server (which you are giving “live555ProxyServer”
the “-V” argument).
Ross Finlayson
Live Networks, Inc.
http://www.live555.com/
_______________________________________________
live-devel mailing list
live-devel@lists.live555.com
http://lists.live555.com/mailman/listinfo/live-devel
_______________________________________________
live-devel mailing list
live-devel@lists.live555.com
http://lists.live555.com/mailman/listinfo/live-devel
