Thanks Colin. The fact that I do get some very jerky but clear video
rendered, does make me suspicious that I’m not
implementing my DS source filter correctly. In particular I’m looking closely
at GetMediaType(..), etc method(s). As I said,
my skills are weak/intermediate in this stuff, so any tips from the “Pros” are
greatly appreciated.
Question...is it OK for me to post some of my DirectShow code here so that
you might be able so see if/where I’m
going wrong ???
Tom Fisher
From: Colin Caughie
Sent: Wednesday, April 10, 2013 12:26 PM
To: LIVE555 Streaming Media - development & use
Subject: Re: [Live-devel] testRTSPClient / H.264 Network Camera Stream
I’ve also worked with cameras that don’t send sprop-parameter-sets in the SDP
file (but not using the Live555 client); this shouldn’t be a problem as long as
the camera does send SPS and PPS in band. The fact that you are able to decode
and display the raw NALUs using DirectShow would indicate that it is (decoding
would fail otherwise), so perhaps your problem is elsewhere?
Colin Caughie
Chief Software Architect
(509) 232-5261 ext 5914
What is heroic customer service?
** NOTICE **
The information contained in this e-mail and any attached documents may be
privileged, confidential and protected from disclosure. If you are not the
intended recipient you may not read, copy, distribute or use this information.
If you have received this communication in error, please notify the sender
immediately by replying to this message and then delete it from your system.
From: live-devel-boun...@ns.live555.com
[mailto:live-devel-boun...@ns.live555.com] On Behalf Of Ross Finlayson
Sent: Tuesday, April 09, 2013 5:05 PM
To: LIVE555 Streaming Media - development & use
Subject: Re: [Live-devel] testRTSPClient / H.264 Network Camera Stream
It must also be VERY frustrating to see these companies making $$$$$$$
from your very nice work !!!
On the contrary - I am *happy* to see many companies making successful use of
this software. That's why I made it available.
This is BAD news as the camera is:
http://foscam.us/products/foscam-fi9821w-megapixel-wireless-ip-camera.html
What does frustrate me, however, is that so many of the companies that have
successfully used this software in their products have avoided making use of
the support offered by this mailing list. In particular, nobody from "Foscam"
appears to be on this mailing list.
I am just an end-user and thus probably have little influence on them. I
will send them
the info that you suggest but I will be very surprised IF they respond.
Please also check whether you have the latest firmware for your camera.
Firmware upgrades for Foscam camera can apparently be downloaded from:
http://foscam.us/firmware
Are there any other possible work-arounds?
No. The problem is with the camera.
Ross Finlayson
Live Networks, Inc.
http://www.live555.com/
--------------------------------------------------------------------------------
_______________________________________________
live-devel mailing list
live-devel@lists.live555.com
http://lists.live555.com/mailman/listinfo/live-devel
_______________________________________________
live-devel mailing list
live-devel@lists.live555.com
http://lists.live555.com/mailman/listinfo/live-devel
