Ross, We'll look into this problem. Thanks for the explanations.
Andrey On Fri, Feb 24, 2012 at 8:57 AM, Ross Finlayson <finlay...@live555.com> wrote: > Your email indicates a lot of confusion, and a lot of unnecessary flailing > around. It's better to ask questions one-at-a-time, in chronological order, > as they arise. > > The first question you should be asking is: Why is "testRTSPClient" failing > when it tries to receive a stream from your server? Fortunately, the > debugging output from "testRTSPClient" helps tell you the answer: > > Sending request: SETUP rtsp://192.168.0.12 RTSP/1.0 > CSeq: 3 > User-Agent: ./testRTSPClient (LIVE555 Streaming Media v2012.01.13) > Transport: RTP/AVP;unicast;client_port=46636-46637 > > > Received 100 new bytes of response data. > Received a complete SETUP response: > RTSP/1.0 200 OK > CSeq: 3 > Session: 47112344 > Transport: RTP/AVP;unicast;destination=0;port=46636 > > > [URL:"rtsp://192.168.0.12"]: Failed to set up the "video/JPEG" subsession: > Missing or bad "Transport:" header > > > So the problem here is that your server (your "Elphel NC353L camera") is > returning a bad "Transport:" header in its response to the RTSP "SETUP" > command. It is incorrectly including a "port" parameter for a unicast > stream. The "port" parameter (as noted in RFC 2326, section 12.38) is > supposed to be used for a multicast stream. For a unicast stream - such as > this one - the server should be including a "server_port" parameter instead. > > You should contact your camera's manufacturer (Elphel), to check if they > have a firmware upgrade. If they don't then please tell them about this > problem, and ask them to fix it. > > > Ross Finlayson > Live Networks, Inc. > http://www.live555.com/ > > > _______________________________________________ > live-devel mailing list > live-devel@lists.live555.com > http://lists.live555.com/mailman/listinfo/live-devel > _______________________________________________ live-devel mailing list live-devel@lists.live555.com http://lists.live555.com/mailman/listinfo/live-devel
