And when I receiving a TS with -v option, this will put to stdout only the video? Because I need the video and audio with TS container to feed my applicaton, so I need the untouchet TS data. How can I use the -v option, because I've tried to start openRTSP with this command: "openRTSP "rtsp://<ip>:<port>/testtransportstream" -v" But I get error.When I run like this: "openRTSP "rtsp://<ip>:<port>/testtransportstream"" It receive the ts fine, so I don't know where must be put the addictional command line options. -- Eredeti üzenet -- Feladó: Ross Finlayson <finlay...@live555.com> Címzett: LIVE555 Streaming Media - development & use <live-de...@ns.live555.com> Másolat: Elküldve: 04:53 Téma: Re: [Live-devel] openRTSP TS receive as an another program input>But in the website of openRTSP, there are the following:>>-v play only the video stream.>>Not the "-r" option cause to write to stdout?"-v" means: Play (and receive) only the video stream, outputting the received data to 'stdout'."-r" means: Play the entire stream (i.e., video and audio, if present), but don't actually receive the data ourself. (The data will still arrive, but we don't actually receive it ourself.)-- Ross FinlaysonLive Networks, Inc.http://www.live555.com/_______________________________________________live-devel mailing listlive-de...@lists.live555.comhttp://lists .live555.com/mailman/listinfo/live-devel
_______________________________________________ live-devel mailing list live-devel@lists.live555.com http://lists.live555.com/mailman/listinfo/live-devel
